Wisamic Clear Borosilicate Glass Heat Bed 300x300x3mm for 3D Printers Prusa, Tevo Tornado, Mendela, AO Series

If you want to make your printing platform flat enough, ideal stuff is glass sheet. Tempered Silicon glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, tempered glass will quell your frustrations.

Note
Please note that this glass is about 1/4″ short on all sides when use on CR-10, 10S 300 series due to CR-10 heat bed size extension.

Features:
* Borosilicate is a very high temperature glass. It has a melt temperature of about 800° C and a very low thermal expansion coefficient.
* Resistant to thermal shock compared to regular glass.
* Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints.
* Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer.

Specification:
Material: 100% Borosilicate
Size: 300x300x3mm
Thickness: 3mm

Package content:
1 x 300x300x3mm Borosilicate Glass

Product Features

  • Precisely cut and tempered with high transparence. Resistance to scratch and thermal shock.
  • Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface.
  • High binding power when heating. Easy to separate the plastic parts when cooling.
  • Get you out of the trouble when plastic film decreased viscosity after a period of usage.
  • Specially designed to fit the 3D Printers Prusa, CR-10, Tevo Tornado, Mendela, AO Series. Please note that this glass bed is about 1/4″ short on all sides when use on CR-10, 10S 300 series due to CR-10 heat bed size extension.

Visit The Website For More Information…

Published by

admin

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “Wisamic Clear Borosilicate Glass Heat Bed 300x300x3mm for 3D Printers Prusa, Tevo Tornado, Mendela, AO Series”

  1. Very good quality! FLAT! Flat is where it’s at when you talk about 3D printing. I own a Creality CR-10S and the glass that came with it was junk, I couldn’t get a very good bed level on it at all. This glass was amazingly flat and worked perfectly (after I installed a sheet of PEI on it). Now my prints are coming out fantastic.CR-10 & 10S owners take note; this piece of glass is not quite as big as your bed, it is about 1/4″ short on all sides when centered on the bed. No big deal to me, I don’t…

Leave a Reply