Anycubic NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Heatbed or Hot End Pack of 5PCS

Specification:

– For 3D printers: use TEMP_SENSOR 11 in Marlin firmware

– Small Size: 1.25mmx2.0mm glass bead

– High accuracy: 1%

– Resistance value at 25°C=100K

– Wiring insulation: high temperature teflon/PTFE

– Wiring length: 1 meter

Package List:

5* NTC 3950 100k thermistor with female head

Product Features

  • Conviniently pre-wired with 1 meter long high temperature PTFE insulated wiring
  • Use it with heated bed or extruder
  • Temperature sensor 100KΩ accuracy of ± 1%
  • Pack of 5PCS

Click Here For More Information

RepRap Champion 3D Printer MK2B PCB Heated Bed 200x200mm, Borosilicate Glass, Hardware, Wiring, Thermistor Kit for Prusa i3 or other RepRap

Speed up your reprap heated bed assembly – get all necessary parts in one kit. You will need 2-4 paper binder clips to hold glass in place, best source for these clips – ebay.com or your local office supply store.

MK2B Heated Bed Specs:

Dimensions: 214mm x 214mm
Hole Spacing: 209mm
Laminate FR4 1.6mm
2 Layer, 35µm Copper
Red Soldermask – Both Side
White Silkscreen – Both Side
Power Input: 12V/24V DC
Copper Plated Holes

Borosilicate Glass Specs:

Dimensions: 213mm x 200mm
Thickness: 3mm

NTC 3950 Thermistor Specs:

Thermistor temperature value table for Marlin
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter.

Package contents:

1 x MK2B PCB Heated Bed
1 x Borosilicate Glass Print Surface 200x213mm
1 x NTC 3950 Wired Thermistor (wiring is 1 meter long)
1 x Power wiring (2 wires, 1 meter long each)
4 x M3x05 x 25 Stainless socket head screws
4 x M3x05 Steel Locknuts
8 x M3x9 Steel Washers
1 x Silicone Rubber Spacer, about 50mm long.

Product Features

  • Compatible with most RepRap 3d printers
  • Popular, dual 12V / 24V power MK2B design
  • All necessary for MK2B mounting small bits are included
  • Wiring and pre-thermistor are included
  • Use binder clips to hold glass plate on the MK2B

Detailed Information available on our Homepage…

TOOTO 3 PCS 100Kohm NTC 3950 Thermistors with Teflon Insulated Wiring for RepRap Prusa 3D Printer Extruder or Heated Bed pre-wired


Lot of 3 pcs NTC 3950 thermistors. Thermistors have been pre-wired for your convenience with 1 meter teflon insulated wires.

NTC 3950 Thermistor features:

– For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
– Small Size: 1.25mmx2.0mm glass bead
– High accuracy: 1%
– Resistance value at 25¡ãC=100K
– Wiring insulation: high temperature teflon/PTFE
– Wiring length: 1 meter

Package contents:

– 3 x NTC 3950 100k Thermistor assembled with 1 meter teflon wiring.

Product Features

  • Support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration
  • Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
  • Use it with heated bed or extruder
  • Cable length :1m
  • Temperature sensor 100K¦¸ accuracy of ¡À 1%

Detailed Information available on our Homepage…

HICTOP 3MM MK3 Aluminum Heated Bed Hot Bed PCB Heatbed Platform for Reprap 3D Printer 200W 12V + Wiring

This heated bed works as heat producer, heat spreader and print surface.

Specifications:

Dimensions: 275mm x 200mm x 3mm
Mounting hole diameter: 3.5mm
Material: Aluminum 3mm thick
Voltage: 12V

Package contents:

1 x MK3 275x220mm Aluminum Heated Bed
1 set of Power wires (3-color composed)

Product Features

  • No soldering required, safe and convenient
  • Aluminum plate
  • Dimensions: 275mm x 220mm x 3mm
  • Power wiring is included in the kit
  • Compatible with most Prusa i3 variations

Detailed Information available on our Homepage…