Witbot MK10 M7 0.4mm Extruder Upgrade Stainless Steel Wear Resistant Nozzle for Makerbot RepRap 3D Printer (Pack of 5pcs)

Specifications:
Bore Diameter: 0.4mm
Size: 13mm * 9mm
Net Weight: 4g/pcs
Material: Stainless Steel

Package Included:
5*MK10 Stainless Steel Nozzle

Product Features

  • 100% brand new and high quality
  • This product is dedicated on MK10 Extruders
  • The nozzle material use the national standard copper
  • Compare with the non-national standard copper, it have obvious differences,our nozzle’s thermal conductive performance is better than the non-national standard copper
  • Hard coating improves service life and reduces down time

Click Here For More Information

Micro-Swiss HW-NOZ-MK10-04 Plated Brass Wear Resistant Nozzles , 1.75 mm, MK10 (Flash Forge/Dremel/Wanhao) 0.4 mm, Bright Nickel

Easy upgrade for trouble-free printing of hard composites! Our Plated Brass Wear Resistant Nozzles are made from brass for good thermal conductivity and plated with an extremely hard high lubricity coating. The coating increases the life of the nozzle significantly. We have yet to wear out a nozzle! With normal brass nozzles noticeable wear can occur after as little as 500g of Stainless Steel material.

Currently available in:

1. MK8 Style (M6 Threads compatible with most Makerbot style machines including the Replicator 1, 2, 2x, 5th gen, Mini & Z18) in 0.4mm & 0.6mm diameter orifices – 1.75mm filament only.

2. MK10 Style (M7 Threads for newer Flash-Forge, Dremel & Wanhao) in 0.4mm & 0.6mm diameter orifices – 1.75mm filament only.

3. Modified MK8 RepRap Style (M6 Threads compatible with E3D (including BigBox), Hexagon (newer Lulzbot & Robo3D) & Ultimakers upgraded with an Olsson block) for 1.75mm & 2.85mm filament diameter in 0.4mm, 0.6mm & 0.8mm diameter orifices.

4. Printrbot Ubis Style (for all Printrbots W/O all metal upgrade) in 0.4mm & 0.6mm diameter orifices (ignore 0.2mm marking…long story) – 1.75mm filament only.

5. Afinia/UP!/Zortrax Style in 0.4mm & 1.75mm filament only.

Larger diameters require more parameter modification, but have slightly more consistent extrusion & increased life over 0.4mm.

Custom manufactured for ProtoPlant, makers of Proto-pasta in the USA by Micro Swiss.

contact Proto-pasta for more information.

Product Features

  • USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials.
  • Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance.
  • Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure.

Detailed Information available on our Homepage…

Maintenance Lube for 3D Printer and CNC Machine Fully Synthetic Oil w/ PTFE Reduces wear, friction and noise Lube3D

Lube 3D is the first and so far only Maintenance Oil specifically for 3D Printers and other CNC machines. This offer includes a 1 Oz bottle of Lube 3D with a locking safety cap and has a small droplet applicator built in. The content of this bottle will last you more than one year even if you apply Lube 3D every week! This Oil is fully synthetic and uses PTFE (Teflon (R)) particles for best lubrication properties for metal on metal friction. This helps in reducing noise and wear on linear bearings, lead screws, and any other metal-to-metal and metal-to-plastic friction application. It is advised to clean the guide rods and lead screws of your 3D printer and other CNC equipment every 7-14 days of active use, but at least once a month! Application Procedure: Clean up: If you see dust and debris sticking to you guide rods, use a soft cloth or a paper towel to remove dirt gently. 1. Apply a few drops of Lube 3D on both sides of the linear bearing and male and female parts of your lead screw assembly. 2. Be careful to apply a small amount of Lube 3D, don’t let it drip into your machine. 3. Move the bearing or lead screw slowly over the freshly applied lubricant. Ideally, the lubrication film is so thin that you can only barely see it. 4. Remove any oil drips 5. Repeat every 7-14 days or when necessary

Product Features

  • First Lubricant Specifically for 3D Printers and CNC Machines
  • Fully Synthetic High Viscosity Oil with Suspended PTFE Particles
  • Non-Toxic, Non-Corrosive, Waterproof, Food-Grade
  • Easy Application with Built-in Droplet Applicator in Bottle
  • Safety Cap to Reduce Risk of Accidental Opening and Tampering

Detailed Information available on our Homepage…