Wangdd22 3D Printer J-head Dual V6 Head Extruder Hotend with 0.4mm Nozzle 12V Cooling Fan and M4 Fisheye Effector Hanging Station for 1.75mm Filament

Description:

V6 Extruder:
●With PTFE in hot regions of our HotEnd we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C.
●This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
●Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.
Specification:
Type: Bowden J-head Dual V6 Hotend
Included: NTC3950 thermistors and 12V 40W heater
NTC 3950 Thermistor parameters:
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Fisheye Effector:
Material: Aluminium Alloy
Scrwe size: M4
This effector fits V6 J-head hotend (bowden and wade),it can hold two J-head together.
Don’t compatible with chimera multi-extrusion hotend and V5 version J-head hotend.

Package includes:
2x long distance V6 J-head extruder with 0.4mm nozzle ,12V heater
2x 12v cooling system
1x dual head M4 effector

Product Features

  • RepRap 3D printer extruder hotend compatible with E3D V6 1.75mm / 0.4mm
  • 12V 40W heater, 12V high speed fan with shroud, NTC 3950 pre-wired thermistor
  • Metal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials
  • Easy No-Solder, No-Tape, No-Adhesive assembly and maintenance.
  • This 3D Printer Dual V6 Hotend is applied for 1.75mm Filament Long-Distance Filament Bowden extruder

Detailed Information available on our Homepage…

What's Hot Today!

Wangdd22 3D Printer Kit 14pcs/lot Cables Complete Wiring Cables Set For RAMPS 1.4 Endstops Thermistors Motor Dupont Cable

Description:
Use these cables enjoy your all of your electronic projects,Such as 3D printers, Arduino motherboards, modules and so on.

Package includes:
3pcs 70cm 2pin F-F Wires
6pcs 70cm 3pin F-F Wires
5pcs 70cm 4pin F-F Wires

Product Features

  • Cable Length:70cm.
  • Cable Attributes: Female to Female.
  • Product Color: Red, Black, Green, Blue.
  • 1 Set=3pcs 2pin+5pcs 4pin+6pcs 3pin cable
  • Product uses: Such as 3D printers, Arduino motherboards, modules and so on

Click Here If You Need More Detailed Info…

What's Hot Today!

Wangdd22 2pcs GT2 Pulley 20 Teeth Bore 5mm + 5m GT2 Timing Pulley Belt + 2pcs Idler +4pcs Belt Locking Spring for 3D printer RepRap

Specification:

GT2 Pulley:
Teeth 20
Groove Width 7mm
Total Widtn 15mm
Bore 5mm
Flange Dual
Material Aluminium

GT2 Belt :
Pitch GT2
Width 6mm
Length 5M

Idler:
Teeth 20
Diameter of Bore 5mm
Total Width 8mm
Material Aluminium

Package include:
1 x GT2 Belt
2 x GT2 Pulley
2 x Idler
4 x Locking Spring
4 x Screws
1 x Wrench(As Pictures)

Product Features

  • Durable and practical.
  • Designed specifically for linear motion.
  • GT2 Pulley and GT2 Belt are used together,very convenient to use.
  • Round tooth profile guarantees that the belt tooth fits smoothly.
  • 20 Teeth contact with the belt, that minimizes the chance of the belt slipping.

Click Here For More Information

What's Hot Today!

Wangdd22 5PCS GT2 Timing Belt Idler Pulley ( 20 teeth ) 20T Aluminum Bore 5mm With Bearing For 3D Printer Accessories Belt Width 6mm

Specification:
Use for GT2 6mm Wide Timing Belt
Material: Aluminum Alloy
Diameter: 5mm
Teeth: 20 (T)
Pitch: 2 mm
Belt Width: 6mm
Color: silver
Quantity: 5

Package includes:

5 x Belt Idler Pulley

Product Features

  • H-type synchronous pulley wheel
  • Each of the two sides with wheels were mounted bearings
  • Adopting high quality Aluminum Alloy material,sturdy and durable
  • Adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively
  • Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions

Detailed Information available on our Homepage…

What's Hot Today!