Basic parameters: Temperature resistance: HT-NTC100K (no need to change the firmware, directly replace the old thermistor) Feeding type: remote feeding Heater power: 50W Type of pipe: straight through throat Heater voltage: 12V Line length: 1M Product weight: just the sensor 36g, with 1M heater 65g
Note: This product is with the high temperature line but the hotend itself is through throat, with Teflon inside, so the temperature can not exceed 260 degrees, otherwise it will cause Teflon melt and get clogged!
►This is a Optimized version of 3D Printer Extruder. It is very light and compact. It can use a lighter motor, any Bowden-type 3D printer can become a powerful, reliable little beast. It is easy to manually squeeze, remove, load and unload Filament. At the same time, You only need a hex wrench, you will be able to within a minute to remove the Titan, regardless of the opening and assembly are very easy and fast.
►Installation Points: The top surfaces of the two gear s must be flush adjust the pinion accordingly
►We have done thousands times of tests, including strength testing, time testing and so on. It really works well. Let’s try it:))
Package include: ►1 x WINSINN Extruder Full kit (All Accessories show as Picture 2) ►Note: This Kit NOT Included Motor, V6 Hotend, Titan Aero
►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))
Compatible with E3D-V6 Hotend and Titan Aero Upgrade Kit
High quality Titan extruder, Very easy to upgrade your printer
Filament:1.75mm 3mm PLA / ABS / Flexible / other
Suitable For Remote and Short distance
Note: This Kit NOT Included Motor, V6 Hotend, Titan Aero