EAONE 2 Pcs PTFE Teflon Tube (2 Meters) with 4 Pcs PC4-M6 Fittings for 3D Printer 1.75mm Filament (2.0mm ID/4.0mm OD)


EAONE 2 Pcs 2M PTFE Teflon Bowden Tube(2.0mm ID/4.0mm OD) with 4 Pcs PC4-M6 Fittings for Reprap 3D Printer 1.75mm J-Head Hotend
Specification of PTFE Teflon Tube

Material: PTFE (Poly Tetra Fluoro Ethylene),Density: 2.15-2.20g/cm3
Heat resistance, up to 260℃
Outside Diameter: 4mm, Inside Diameter: 2mm
Color: White
Length: 2m

Specification of PC4-M6 Fittings:

Material : Copper, Plastic
Thread Diameter : 6mm;Inner Diameter(Blue End) : 4mm
Heat resistance J-head is able to bear greater and stronger impulse but won’t tripping
easy to install and durable
Oval release ring turn 360°freely, convenient to disassemble

Note:
Compatibility: Compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8

Attention: Small parts, keep away from children

package including:
2 x 2M PTFE Teflon Bowden Tube(2.0mm ID/4.0mm OD)
4 x PC4-M6 Fittings for 4mm OD Tube with M6x1 Threads

Product Features

  • Package include: 2x 2M PTFE Teflon Bowden Tube(2.0mm ID/4.0mm OD) + 4x PC4-M6 Fittings
  • Size: Length: 2m, Outside Diameter: 4mm, Inside Diameter: 2mm
  • Material: PTFE (Poly Tetra Fluoro Ethylene),Density: 2.15-2.20g/cm3, heat resistance, it’s temperatures can up to 260℃
  • J-head: standard size J-head with turn freely release ring is able to bear greater and stronger impulse but won’t tripping, easy to install and durable
  • Compatibility: Compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8

Visit The Website For More Information…

What's Hot Today!

Copper Tube upgrade kit for XYZ Da Vinci Pro 3D printer

This kit is an upgrade for the factory feed tube that causes jamming and ticking. Easy to install with just a pair of cutters or sissors.kit includes copper tube,and an assortment of zip ties. Just follow picture instructions for installation.

Detailed Information available on our Homepage…

What's Hot Today!

10 Pcs 5mm Male Thread 4mm/0.16 Push to Connect PC4-M5 For PTFE Tube 3D Printer Connector

Pneumatic fittings are used in pneumatic piping.

Features:
1. Easy to connect by inserting the tube it will automatically lock tight.
2. Easy to disconnect tube by one push on the blue cap.
3. Elliptical sleeve makes it possible to apply and remove the tube easily in confined space.

Applications:
One-touch joints used in pneumatic piping.
Used for a wide variety of modes to meet all needs.

Package include:
10x PC4-M5 Quick Fittings
10x Black Rubber Seal

Product Features

  • Item Name: Quick Fittings. Model: PC4-M5.
  • Material: Copper, Plastic. Color: Brass, Blue.
  • Thread Diameter: 5mm. Inner Diameter (Blue End): 4mm.
  • Total Size (Each): 19.8 x 10mm . Weight: 50g.
  • Package Content: 10 x PC4-M5 Quick Fittings. 10 x Black Rubber Seal.

Detailed Information available on our Homepage…

What's Hot Today!

ARQQ Heat Bed Mosfet Tube Hot Bed Power Module Expansion for 3D Printer Heating Bed Accessories(Pack of 2)

Details: Dimensions: 60*50mm
Net Weight: 40g
Color:Black
Max Current: 25A(Enhance heat dissipation)
Wire’s color is random

Summary:
1. Remove basically all ouside screws for your anet a8 control box
2. Take pictures of existing board wiring
3. Unscrew two large 12/14GA wires on the board labeled “hot bed”
4. Screw these two wires into the new mosfet board labled “hot bed”
5. Connect the small jumper wires (white) to the control board where you just removed the two wires and screw them down. Note the polarity on each board. Match (+) to (+) and (-) to (-)
6. FInd 2x 6-8″ pieces of 12 or 14 AWG wire. Most cheap extension cords are 16AWG (too thin). Your local home depot / menards / ace will have this as cut-to-length
7. Run one of the 6″ wires to the power supply (+), screw in; and the other side to the (+) DC IN on the new mosfet board. Repeat for the negative wire (-) to (-)
8. Many people use velcro to secure the new board to the top of the control box. Others print off a holder from thingiverse
9. Put everything back together
10. When complete, you’ll see a blue light activate for signal from inside the box when the bed heater is activated by the control board

Package Included:
2xHot bed MOS Tube Power Module Expansion

Product Features

  • Work with anet a8 3d printer heat bed
  • Completely solve the hot bed power is too large and the load current issue
  • Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working
  • General Add-on Heated Bed Power Expansion Module
  • Note: Any issue please contact us before, we will always here to help!

Detailed Information available on our Homepage…

What's Hot Today!