1 Roll 6″ inch WIDE 3D Printing Made In USA PRO Grade Blue Painters Tape Masking Clean Release Easy Removal NO RESIDUE (144MM x 55M 5.7 inch). 3D Printer bed grip deck cover 3D Prints Removal 60 Yd

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape is Professional Grade multi-use Contractors tape featuring a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days.

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

(REMOVE SLOWLY and carefully from freshly painted surfaces!)

Very Important: Surfaces must be well cleaned, dust free, greaseless, and very dry before application. While the backing of the tape is moisture resistant the adhesive is definitely not. ALL adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more you run your fingers over it, the better the adhesion (less bleed). REMOVE ASAP! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

HICTOP 3D Printing Build Surface Tape for Heated Bed, 8.4″ x 8.4″ Square,Black (Pack of 3)


Compatible with ABS, PLA, HIPS, PET+, brick, and flexible (TPE) filaments (sold separately). Background is made of 3M adhesive ,
easily stick on the heat bed platform.
Size: 8.4″ x 8.4″ or 214mmx214mm
Thickness: 1mm

Product Features

  • Build sheet adheres to a print bed to help the filament stick during printing, it is easy to take off the models
  • Compatible with ABS, PLA, HIPS as well as other kinds of filament
  • Durable construction allows for multiple uses with either the same or different filament material
  • Single sheet design installs more quickly and with fewer bubbles than tape or films
  • One tape can be use repeatedly for at leat 3 month normally

Detailed Information available on our Homepage…

(2-Pack) 1 Mil Hi-Temp Kapton Tape; 2 Roll Set of Polyimide Film Tape for 3D Printing, Soldering, Insulating Circuit Boards & More! (1 Inch)

(2-Pack) 1 Mil Hi-Temp Kapton Tape; 2 Roll Set of Polyimide Film Tape for 3D Printing, Soldering, Insulating Circuit Boards & More!

Durable and easily conformable, our high temperature Kapton film tape is ideal for many home and commercial applications, and now sold in convenient 2-roll value packs!

Made of heat-resistant polyimide film and backed by silicone adhesive, our Kapton tape will leave you with clean precise lines and wraps that are easy to remove, with no gunky residue. Even at excessive temperatures!

Safe and RoHS compliant, our low static film tape can withstand temperatures from -452 to 752 degrees Fahrenheit, ideal for high-temperature powder-coating, automotive sensor and manifold work, etching, fiber optics cable wrapping and 3D printing. ABS (acrylonitrile butadiene styrene) plastic used in 3D printers adheres securely to Kapton tape for seamless, un-warped designs every time. Our temperature resistant tape is also fantastic for insulation and soldering – you can put the soldering iron on the tape and it won’t melt!

Whether you’re wrapping, coating, repairing, or insulating, our transparent Kapton tape is the ultimate tool. Sturdy but easily conformable, our tape is transparent for superior task visibility. Enjoy easy, perfectly placed applications every time.

Each roll contains 216 feet of polymide Kapton film tape. Now available in 1/2-inch, 1-inch, and 2-inch sizes. Each size is 1 mil thick, with a tensile strength of 33,500 psi. RoHS compliant.

Shop with confidence. Shop Cornucopia Brands.

Product Features

  • ✓ CONVENIENT 2 PACK – High temperature Kapton tape now sold in value packs of 2 rolls; each roll contains 216 feet per roll.
  • ✓ HIGH TEMPERATURE POLYIMIDE FILM TAPE – Kapton tape is durable and capable of withstanding temperatures from -452 to 752 degrees Fahrenheit.
  • ✓ NO RESIDUE – Backed with silicone adhesive, our high temperature tape peels away cleanly, without residue.
  • ✓ TRANSPARENT – Transparency allows for project visibility, such as observation of circuit boards during processing, and makes perfect placement easy.
  • ✓ MULTI-PURPOSE APPLICATIONS – Strong, but easily conformable, our Kapton tape is ideal for a variety of home and commercial projects like 3D printing, soldering, high-temperature powder coating, etching, and more!

Check Out Our Website For Details…

3D Printer Parts Accessories Maintanance Kit ABS Blue painter’s tape Print bed removal tool Glue Sticks + 4ty .40mm Clogged nozzle bits with pin-vise

Kit Includes:

1) 2 Quantity BLUE PAINTERS TAPE PRINT BED STRIPS: Perfect for ABS filament users. PLA can sometimes require Kapton tape due to higher print bed heat. Measures: 8.25″ x 8″ (200MM x 210MM). Easily applied with any flat/straight object (ruler or id card of some sort)

2) 1 high quality PRINT BED REMOVAL TOOL Measures: 8″ x 3″. Beveled for much easier print removal. 3″ wide for removing prints without them falling off one side of the tool. Semi-sturdy blade allows for some flexibility but insures the print will not bend the blade and fall off. Sturdy construction means years of use.

3) 4 quantity .40mm Tungsten Carbide Drill Bits For regular nozzle maintanance and de-clogging (comes with an amazing 3.5″ pin-vise) Use as regular maintanance before each print or to un-clog a nozzle when prints begin to lose quality. Available in MANY sizes and combinations. Build your own pack from scratch option available.

4) 2 quantity glue sticks (7g or 0.24oz each) Glue makes removal with the tool much easier. Using the glue will also increase the life of each tape strip. Glue brand may vary but will always be 7g or 0.24oz.

About the Kit:

This kit is a must have for any 3D printer owner. It can also serve as a great start-up kit for a new printer owner. Removing prints from a print bed can be quite the hassle and can leave residue behind. Using the blue painters tape will increase the life of your print bed. The glue can be applied lightly over the tape in the area where your print will be. Use the 3″ wide tool to carefully remove your print and place it where you wish. The bits will fit perfectly in the pin-vise. Use them to un-clog nozzles or as regular maintanance before printing.

Product Features

  • 2 Painters Tape Strips 8″ x 8″
  • Print Removal Tool: 8″ x 3″
  • Nozzle Maintanance Kit: 4qty .4mm Bits and Pin-Vise
  • For ABS and lower heat PLA filaments
  • 2 Glue Sticks included: Brand may vary: Always 7g 0.24oz each

Detailed Information available on our Homepage…