10 Pieces drill bit for 3D printer, flexible stainless steel nozzle cleaning tool kit, diameter specification 0.2 mm, 0.3 mm, 0.35 mm, 0.4 mm, 0.5 mm
Durable to use: Can use for heaps of times as it is made of stainless steel with good flexibility, not rust or break easily.
Enough quantity: 10 Pieces of nozzle drills in 5 sizes, applicable in your daily life, and they are held in a box, in case of missing.
Compatibility: Matches most 3D print extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap, etc..
Specifications: Material: stainless steel Bit diameter: 0.2 mm, 0.3 mm, 0.35 mm, 0.4 mm, 0.5 mm The bit length: 2.5 cm, 4 cm, 5 cm, 6 cm, 7.5 cm The shank length: 2.5 cm, 3 cm, 3 cm, 3 cm, 3 cm Total length: 5 cm, 7 cm, 8 cm, 9 cm, 10.5 cm
Package included: 10 x Needle drill bits
Quantity and size: 10 pieces in total, 2 pieces per specification, the needle drill bits have 5 sizes (0.2 mm, 0.3 mm, 0.35 mm, 0.4 mm and 0.5 mm), different sizes can meet your multiple needs
Good material: made of stainless steel, flexible and won’t break easily; Comes with a handle, so you can easily twist it during use
Wide range of compatibility: compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap, etc.
Function: it can be applied to accurately measure the diameter of nozzle holes, you can clean the small size nozzles and other small parts by this tool kit, such as the feed gear
Good performance: the drill bits will clean your printer nozzles very well and make it print better
1. Each needle has a label that marks the diameter of it. To make it easier to clean up, you can use a small diameter needle first and then use a needle with the right diameter; 2. Don’t use the needle to clean until the nozzle is heated to above 200℃(392℉). You can twist the needle to make it easier to clean up; 3. After replace the nozzle, you’d better recalibrate the distance between nozzle and plate to ensure the quality of print parts; 4. Size: total length: 70mm/2.76in; Needle length: 40mm/1.57in; Handle length: 30mm/1.19in 5. Sharp parts, please keep away from children.
Compatibility: Matches all 3D print extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap, etc.
Quantity and size: 5PCS in total, 1 pieces per specification, diameter specifications 0.2mm 0.3mm 0.35mm 0.4mm 0.5mm
Widely used: It can be used to accurately measure the diameter of nozzle holes. You can precision clean all of small size nozzles and other small parts by the tool kit, such as the feed gear. You can also use 0.5mm needle to clean holes in larger diameter
Material: SUS304 stainless steel, it’s flexible and doesn’t break easily. It comes with a handle, so you can easily twist it in during use
Durability: It can be used heaps of times, because of SUS304 stainless steel material. It will neither rust nor be broken, no matter how it is used
Extrusion : Hot melt extrusion molding accumulation
Print Range :Indefinite
Spinning speed : Adjustable
Heating temperature in the range :160- 250 degrees Adjustable
Device operating voltage : 12V 3A
Nozzle :0.7 mm
Product packing list:
3D stereoscopic printing pen with LCD screen
12V 3A Power Adapter
3 free filaments 10g each
Instructions for operation:
1.Connect one of the end of the Power Adapter and AC power cord to socket. And connect the other end of the DC plug into the “Power” port on the end of the pen. You can see the yellow LED lights, indicating the device is powered and into servo standby model.
2.Press “Wire Feeding Button”，you can see stunning LED lights, indicating the device has entered the warm-up model, about 0.5-2 minutes later, when the red LED lights turns from red to blue, indicating the end of warm-up, the device is ready for normal operation.
3.Insert the filament into ” Wire Loading Hole”, meanwhile, you may use your another hand to press “Wire Feeding Button”, then supplies will be transported by the built-in motor, the tip end of the nozzle will spit gum,means you load successfully.
4.Your show time,The device is provided with stepless speed control function, in the creative process can be adjusted according to the glue line pen speed, no need to operation with both hands.
1.Never touch the nozzle or the heat-generating components while operating.
2.If the device is not used more than five minutes, it will automatically goes to standby model.The “Indicator” show no light. To use it again, you need to press the “Wire Feeding Button”.
3.Children should use it under the tutelage of adult.
More colorful life: The 3D print pen is the best gift for children, and it is also perfect for everyone who is creative ! With this great invention–the scribbler 3D pen, you may unleash your and your children’s limitless creativity wherever you want. Let it run rampant in your studio,at home, in school, outside…Children with it living in a beautiful fairy tale world. Adult with it living in a life full of infinite creativity and art. The only limit of a colorful life is your imagination!
More comfortable: The product is lightweight design: a slim (easy to handle) design . We believe a heavy weight product is not conducive to hold control operation. We believe that this design is the closest you can get to User-Friendly requirements and anti fatigue. Meet the needs of children , students and adults. .There is no fatigue when or after using.
More convenient: This product has the Heating coil and the nozzle integrated cartridge design. You only need to push the button snaps, users themselves can remove necrosis heating coil and nozzles then replace the plug without guidance or manufacturers or distributors. No need to return for re-repair.
More safer: This 3D print pen adopted with the latest 3D print technology, the FDM (fused deposition modeling ) technology– which today’s leading 3D printers such as Makerbot, 3D system, and Afinia have adopted. And this device use the PLA filament, which has no harm in human body (the traditional ABS filament may have odor while using, and it is harmful to the human body). Another humanized design is the Intelligent Standby. If the user operates in the midway to have a rest or forget to turn off the power , the product will automatically be converted to standby mode after 5 minutes . Heaters will stop working. The both two designs will ensure the safety and avoid the possible danger.
More flexible: This product has the temperature adjustable design and the speed control design. If the temperature is fixed design , we believe this brings users perplex when use without melting point of drawing supplies. So we opened up the temperature regulation. Users can adjust itself depending on the supplies to reach the ideal temperature. This is very important when you are using filaments, such as wood filament or flexible filament which respond differently to temperature difference. We also added variable speed feature, you can freely control it according to the hand speed , allowing users in the creation of real time three-dimensional painting done most practically and with ease. As have mentioned, when you adjust temperature and the speed, the data will show on the screen. You can easily know and control them according to your need.