Gizmo Dorks PEI Sheet, 8″ x 8″ 3D Printer Build Surface Polyetherimide Ultem

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.The second method, get 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 5000 grit paper will also give the PEI sheet more life.

Product Features

  • Great for printing ABS and PLA (along with many other materials) directly on to print surface without the need for additional adhesives or tape.
  • Single 0.8mm sheet installs quickly on top of existing build platform
  • Blue protective film guards against scratches during shipping. Remove film before using PEI sheet.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Easily cut down to size by scoring with a utility knife

Click Here For More Information

Gizmo Dorks PEI Sheet, 10″ x 10″ 3D Printing Build Surface with 3M 468MP Adhesive Tape

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. Remove the blue protective film from the PEI sheet. Carefully apply the 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 2400 grit paper will also give the PEI sheet more life.

Product Features

  • Great for printing ABS and PLA (along with many other materials) directly on to print surface without the need for additional adhesives or tape.
  • Single 0.8mm sheet installs quickly on top of existing build platform
  • Blue protective film guards against scratches during shipping. Remove film before using PEI sheet.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Includes: 1x PEI Sheet, 1x 3M 468MP Transfer Tape

Check Out Our Website For Details…

Gizmo Dorks PEI Sheet, 8″ x 8″ 3D Printing Build Surface with 3M 468MP Adhesive Tape

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. Remove the blue protective film from the PEI sheet. Carefully apply the 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 2400 grit paper will also give the PEI sheet more life.

Product Features

  • Great for printing ABS and PLA (along with many other materials) directly on to print surface without the need for additional adhesives or tape.
  • Single 0.8mm sheet installs quickly on top of existing build platform
  • Blue protective film guards against scratches during shipping. Remove film before using PEI sheet.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Includes: 1x PEI Sheet, 1x 3M 468MP Transfer Tape

Check Out Our Website For Details…

KR-NET® 3D Printer Adhesive Sticker Build Sheet Grid 7.8″ x 7.8″ (Pack of 3) for XYZ Printing Da Vinci Pro / 1.0A /2.0A Duo /1.0 Aio


Premium 3D Printer Build Sheet
Build sheet adheres to XYZ printer’s bed to help the filament stick during printing, at the same time protecting your printer.

Supported Filaments
Adapt to different filaments, ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE).

Special Features
Heat resistant durable construction surface. High quality 3M sticker, bubble free and easy apply/ removal.

Design for XYZ Printing (7.8″ x 7.8″ models or smaller)
Design for XYZ Printing models, Da Vinci Pro / 1.0A /2.0A Duo/ 1.0 Aio. You may cut the KR-Net Build Sheet into any smaller size.

Compatible to:
XYZ Printing Da Vinci Pro
XYZ Printing Da Vinci 1.0A
XYZ Printing Da Vinci 1.0 Aio
XYZ Printing Da Vinci 2.0A Duo
3D Printers with 7.8″ x 7.8″ platform

Specification
Condition: Brand New

Package includes:
-3D Printer Build Sheets x 3

W839

Product Features

  • Build sheet adheres to XYZ printer’s bed to help the filament stick during printing, at the same time protecting your printer.
  • Design for XYZ Printing models, Da Vinci Pro / 1.0A /2.0A Duo/ 1.0 Aio. You may cut the KR-Net Build Sheet into any size.
  • Adapt to different filaments, ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE)
  • Heat Resistant Durable construction Surface . High Quality 3M Sticker, Bubble Free and easy apply / removal
  • Pack of 3 Sheets. Sealed KR-NET Retail Pack

Detailed Information available on our Homepage…