Kastar LCD 48W 12V 4A 5.5*2.5 AC Adapter Replacement for LCD Monitor, LED Strip Light, Computer Project, Coffeemaker, Air Cleaner, 3D Printer, Massage Instrument, Wireless Router, Fingerprint Machine

This AC Adapter Replacement for LCD Monitor, LED Strip Light, Computer Project, CCTV Cameras, Coffeemaker, Air Cleaner, 3D Printer, Massage Instrument, Wireless Router, Fingerprint Machine and other Low Voltage Device

Product Features

  • Power Input: AC110-240V Worldwide Input Voltage, Please verify carefully that the DC Output (12V 4A) and connector Tip size (in the pictures) match your original adapter before purchasing.
  • Charge with ultra reliability prevents your LCD Monitor, TV or LED strip lights from overcharging, short circuit, and electronic shock; High energy efficiency – friendly to the environment.
  • OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection).
  • Kastar AC adapter perfect replacement for your original adapter with the highest quality standards for ultimate reliability.
  • Package includes: 1 x Kastar LCD AC Adapter, 1 x 3-Prong extended Power Cord, 1 x Kastar Feedback Card.

Detailed Information available on our Homepage…

MonkeyJack 10x10mm 1m Nylon Cable Drag Chain Wire Carrier For CNC Router 3D Printer

Description:

– Easy to install and repair, open on both side, move flexibly, low noise, easy installation.

– Suitable for using in reciprocating motion of the occasion, built in cable, tubing, water pipes, etc.

– Used widely as a component and service parts in CNC machine tools, electronic equipment, counting devices, machinery and electrical machines, etc.

– Low temperature resistance, corrosion resistance, friction resistance.
– Wire Carrier with end connectors for CNC Router Machine / 3D Printer Tools.

Specification:

– Material: Nylon

– Length: Approx. 1 meter/ 3.28ft

– Inner hole size: Approx. 10 x 10mm/ 0.39x 0.39inch

– Outer hole size: Approx. 14x 17mm/0.55x 0.67inch

– Color: Black

Package Includes:

1 Piece 3D Printer Drag Chain with connector

Note:

Due to the light and screen setting difference, the item’s color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.

Product Features

  • Easy to install and repair, open on both side, move flexibly, low noise, easy installation.
  • Suitable for using in reciprocating motion of the occasion, built in cable, tubing, water pipes, etc.
  • Used widely as a component and service parts in CNC machine tools, electronic equipment, counting devices, machinery and electrical machines, etc.
  • Low temperature resistance, corrosion resistance, friction resistance.
  • Wire Carrier with end connectors for CNC Router Machine / 3D Printer Tools.

Detailed Information available on our Homepage…

Stepper Motor Nema 17, 3 PCS Nema 17 Stepper Motor Bipolar 2.0A 59N.cm Holding Torque 4-lead 1.8 Deg 42 Motor for 3D Printer Hobby CNC Router XYZ By Beauty Star

Specification:
Motor type: bipolar stepper
Step Angle: 1.8 deg.
Step Accuracy 5%
Holding Torque: 59Ncm(84 oz.in)
Rated Current/phase: 2.0A
Phase Resistance 1.4ohms
Voltage 2.8V
Inductance 3.0mH¡À20%(1KHz)
Weight: 400g
Frame Size: 42 x 42mm
Body Length: 48mm
Shaft Diameter: 5mm
Shaft Length: 24mm
Wire: 1m 4-lead wire with connecter

Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)

Attention Please:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Product Features

  • Package in 3PCS motors with high torque.
  • 59Ncm(83.6oz.in) holding torque.
  • NEMA 17 bipolar 1.65″x1.65″x1.85″ 4-wire.
  • Build with 1m Cable and 0.1″ pitch Connector.
  • Rated current 2.0A & resistance 1.4ohms.

Click Here For More Information

MYSWEETY 3D Printer Accessories Kit, 500mm Stainless Steel T8 Trapezoidal Lead Screw KFL08 bearing Stepper Motor Nema 17 For 3D Printer Hobby CNC Router XYZ

Specifications:
Lead screw:
Material: stainless steel
Diameter: 8mm
Pitch: 2mm
Lead: 4
Total Length: 500MM

Shaft coupling:
Material: aluminium
Shaft: 6.35 x 8mm
Length: 25mm
Diameter: 18mm

Nema 17 Stepper motor:
Color:silver+black
Motor Length: 40mm
Phase Resistance: 1.5Ohm
Phase Inductance: 2.8mH
Detent Torque: 2.2N.cm
Rotor Inertia: 54g.cm2
Holding Torque: 40N.cm
Step angle: 1.8 deg
Step angle accuracy: + – 5%(full step, not load)
Resistance accuracy: + – 10%
Inductance accuracy: + – 20%

How to install:
1. Pls put screw nut into the Lead screw.
2.Then the 2 Mounted ball bearing separately install at both ends of the Lead screw.
3. According to the size of you need to adjust the distance between the nut and Mounted ball bearing.
4. Put shaft coupling into the Lead screw beside the Mounted ball bearing.

Package Included:
1x Lead screw
2x Mounted ball bearing
1x Shaft coupling
1x Stepper motor

Product Features

  • Package include: 3D printer accessories kit(1xscrew + 1xstepper motor + 2xball supports + 1xshaft coupling).
  • Lead Screw: Material: Stainless stell; Diameter: 8mm; Pitch: 2mm; Length: 500mm. Mounted Ball Bearing: Material: Zinc alloy; Bore diameter: 8mm.
  • Lead screw mainly used in stepper motor, machine tool, and other equipment. Lead screw without processing, direct connected to bearing.
  • Suitable for industrial automation equipment, stepper motor rails; such as 3D printers; engraving machine; XYZ module; slider; lifts etc.
  • Large torque, small vibration, high-quality, low noise!

Detailed Information available on our Homepage…