SIMPZIA Heat Bed Power Module General Add-on Hot Bed Power Module Expansion Board High Current Load Module Mos Tube Hotend Replacement with Cables for 3D Printer – 2 Pack

Heated Bed Power Module Features:
Based on powerful MOSFET HA210NO6
Dimensions: 70 x 45mm/ approx 2.76 x 1.77″
Distance between holes: 62.8 x 37.8mm/ approx 2.47 x 1.49″
Supply/Operating Voltage: 12V-50V (12-24VDC recommended)
Max Current: 25A (Enhance heat dissipation) safe for prolonged times. ensure active cooling of the heatsink.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)

Package Includes:
1 x Heated Bed Power Module.
1 x Connection cable for input signal
2 x Power cable

Note:
This module under the premise of normal cooling, it work stable under (Max) = 25A, the process of using the current not exceed 25A.

Product Features

  • APPLICATION: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.
  • UNIQUE DESIGN: With unique snowflake heatsink design, it has a great cooling effect. The heat bed power module can be used in both Lerdge motherboard and other 3D printer motherboards.
  • 25A MAXIMUM CURRENT: This high power module helps your 3D printer equipped with the Lerdge controller board become even more powerful. The module can solve the current load problem when the heated bed power is too large. With this add-on module to board lead the maximum current up to 25A.
  • GOOD PROTECTION: When using heated bed 3D printer for 12V power supply which may cause excessive current during times, with this module, it can well protect the connectors on the controller board from burning.
  • PACKAGE INCLUDES: 2 x Heated bed power module (motherboard is not included) and 2 x Connection cable for input signal. BONUS: 4 x Power cables.

Detailed Information available on our Homepage…

Kalanution 2pcs Cooling Blower Fan DC 12V 0.15A 50mmx15mm Fans for 3d Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement

Cooling Blower Fan 12vdc 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series; small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; pc cpu server cooling dissipation and so on—Repair Replacement (2Pack)
Type: Centrifugal Blower Size : 50 * 50 * 15mm
Bearings: Oil
Voltage : 12V
Current : 0.15A
Scope: humidifiers , heaters, clothes dryers , etc.
Quantity:2Pc
Noticeļ¼š
This product of our company are non-waterproof product, it is strictly prohibited using in the water. Secondly, product operating voltage is DC12V, prohibit overload use.
Product working environment is below zero 10 Degrees Celsius to 70 Degrees Celsius Fourthly, please do not dismantle the product privately.

Product Features

  • DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for 3D Printer
  • Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H); Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″; Mounting Spacing : 5.8cm/2.3″;Weight : 26g
  • Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Fans
  • Guaranteed to continuously run 10,000 hours under normal temperature. Speed: 5200 RPM
  • Cooling Blower Fan 12vdc 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series; small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; pc cpu server cooling dissipation and so on—Repair Replacement (2Pack)

Click Here For More Information

Upgraded Replacement Parts 3D Printer MK8 Exturder Kit Aluminum Frame Block DIY Kit Accessories for Creality CR-10 3D Printer Series

UCHOOSE, a King Professional 3D printer and Printing Parts Store.
For High Quality & Good Service, We are diligent to Do Our Best !

REPLACEMENT PARTS EXTRUDER KIT 3D PRINTEING ACCESSORIES FOR CR-10 3D PRINTER SERIES

SPECIFICATIONS:
Mounting screws
Aluminum MK8 ‘Extruder’ frame, with bored intake hole.
Bushing
Spring
Brass ‘extruder’ drive gear
35 mm long teflon intake guide. (keeps filament away from Z-screw rod)
Special Bowden tube fitting (improved over stock). For all 1.75 mm filament

Product Features

  • UPGRADE REPLACEMENT PARTS FOR CREALITY 3D PRINTER CR-10 SERIES
  • ORIGINAL ALUMINUM ALLOY DRIVE FEED FOR CR-10 /CR-10S /CR-10 S4/CR-10 S5, IT IS STABLE AND DURABLE.
  • MK8 EXTRUDER DRIVE FEED KITS, CAN REPLACE ACRYLIC PARTS
  • 3D PRINTER MK8 BOWDEN EXTRUDER FRAME. USED FOR 1.75MM FILAMENT
  • FULL METAL ALUMINUM ALLOY, DIY ALUMINUM BLOCK,NEED TO ASSEMBLY BY YOUSELF

Visit The Website For More Information…

Kastar LCD 48W 12V 4A 5.5*2.5 AC Adapter Replacement for LCD Monitor, LED Strip Light, Computer Project, Coffeemaker, Air Cleaner, 3D Printer, Massage Instrument, Wireless Router, Fingerprint Machine

This AC Adapter Replacement for LCD Monitor, LED Strip Light, Computer Project, CCTV Cameras, Coffeemaker, Air Cleaner, 3D Printer, Massage Instrument, Wireless Router, Fingerprint Machine and other Low Voltage Device

Product Features

  • Power Input: AC110-240V Worldwide Input Voltage, Please verify carefully that the DC Output (12V 4A) and connector Tip size (in the pictures) match your original adapter before purchasing.
  • Charge with ultra reliability prevents your LCD Monitor, TV or LED strip lights from overcharging, short circuit, and electronic shock; High energy efficiency – friendly to the environment.
  • OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection).
  • Kastar AC adapter perfect replacement for your original adapter with the highest quality standards for ultimate reliability.
  • Package includes: 1 x Kastar LCD AC Adapter, 1 x 3-Prong extended Power Cord, 1 x Kastar Feedback Card.

Detailed Information available on our Homepage…