EasyULT 6 Pack Makerbot Designed Mechanical Endstop Kit Is For 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280

Connection Description:
Red line connecting VCC (ramps of +)
Connect the black wire GND (ramps of -)
Green Line connection SIGNAL (ramps in s)
High quality connection, using 22AWG wire
Inside of copper wire is very thick, can be resistant to current 2A or 300V voltage
A wide range of temperatures, up to 80 degrees
Tips: In normal circumstances, the system must be configured to three mechanical
Length of Cable: 70 cm
Quantity: 6 set

Product Features

  • Mechanical Endstop perfect for any 3D printer (Including Prusa Mendel i2, Prusa i3, MendelMax, Rostock etc…) also for use on CNC machines and other electronic applications.
  • Customized high quality connection, using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees.
  • Pros: Easy to install, the more common styles.
  • Not easy to pull off, easy to install
  • tips: Under normal circumstances, the system must be configured to at least three mechanical switches.

Click Here If You Need More Detailed Info…

[Sintron] 3d Printer Kit , Ramps 1.4 + Mega 2560 + 5pcs A4988 Stepper Driver w/ Heatsink + LCD 12864 Smart Controller + 3 Pcs End Stop + Mk2b Heat Bed + 2 Pcs Pulley + 2m Gt2 Belts for Reprap Prusa i3

Overview:

This kit is a good start for starter to build your own 3D printer. basically once you get the electronic parts done. then later it would be more easier to complete the rest parts.and yes, this is almost all the electronics you need for your 3D Printer.(except motors and extruder hotend)
If you are not sure what you need to complete your 3d printer project, please feel free to ask. We not just sell them, we also provide professional after-sales service, We will offer you a detailed tutorials including project introduction and their source codes. so welcome to discuss with us, we will try to do technical support as much as we can.

(1)3D Printer Controller RAMPS 1.4 – You can check:https://www.amazon.com/dp/B06WP5DDP1

(2)Mega 2560 R3 – You can check:https://www.amazon.com/dp/B00E94CGTQ

(3)LCD 12864 Graphic Smart Display Controller – You can check:https://www.amazon.com/dp/B00L72FAZU

(4)A4988 Stepper Motor Driver with Heatsink – You can check:https://www.amazon.com/dp/B00JXGT1G6

(5)Mechanical Endstop Switch – You can check: https://www.amazon.com/dp/B00OCFEZ1O

(6)2M GT2 Belt + 2 pcs GT2 20 Tooth Pulleys – You can check: https://www.amazon.com/dp/B00OFUZSP8

(7)MK28 Heatbed:This is the latest version of MK2B,100% compatible with all Prusa and Mendel 3d printer variants.

Package List:

(1)3D Printer Controller RAMPS 1.4 x1
(2)Mega 2560 R3+USB Cable x1
(3)A4988 Stepper Motor Driver with Heatsink x5
(4)LCD 12864 Smart Controller x1
(5)MK28 Heatbed with Thermistor and High Temp Wire x1
(6)Mechanical Endstops x3
(7)2M GT2 Belt+20 Tooth Pulleys x2
(8)Smart Adapter x1
(9)30cm Cable x2
(10)Storage Box x1

Product Features

  • (1) 3D Printer Controller RAMPS 1.4 x 1 + Mechanical Endstops x 3
  • (2) Arduino-Compatible Mega 2560 R3 With USB Cable x 1
  • (3) A4988 Stepper Motor Driver With Heatsink x 5
  • (4) LCD 12864 Graphic Smart Display Controller Kit x 1
  • (5) MK28 Heated Bed with Thermistor and High Temp Wire x 1

Click Here If You Need More Detailed Info…

24V Diamond Hotend Multi Color Hot End 3 IN 1 OUT Extruder For Reprap Prusa I3 Rostock Extruder 3D Printer kit 0.4mm/ 1.75mm

24V Diamond Hotend Multi Color Hot End 3 IN 1 OUT Extruder For Reprap Prusa I3 Rostock Extruder 3D Printer kit 0.4mm/ 1.75mm

Click Here If You Need More Detailed Info…

Wangdd22 8Pcs 20Teeth GT2 Pulley Bore 5mm + 10M(33′) GT2 Timing Belt + 16 x Screws for 3D Printer Parts RepRap Prusa

Introductions:

GT2 belts and pulleys compliant (GT2 pulley) are popular choices for RepRap tests and traps.
The series GT2 belts are specially designed for the linear movement. Use a profile with rounded teeth, which ensures that the belt tooth perfectly and accurately into the pulley groove, so that if one reverses the direction of the pulley, there is no place for the band to move in the groove.
For the best performance, which is at least six teeth in contact with the pulley at a given time. This minimizes the possibility of sliding ring and helps to play in reducing even more. In practice, this means that you have made at least a pulley 12 teeth, and I usually try to get at least 16 teeth.

Specifications:
GT2 Pulley:
Teeth: 20
Groove Width: 7mm
Total Width: 16mm
Bore: 5mm
Flange : Dual
Material: Aluminium

GT2 Belt:
Length: 10m
Width: 6mm
Material: Rubber
Color: Black
Step: GT2

Package include:
1 x GT2 Belt
8 x GT2 Pulley
16 x Screws
1 x Wrench(As Pictures)

Product Features

  • Durable and practical
  • Designed specifically for linear motion
  • GT2 Pulley and GT2 Belt are used together,very convenient to use
  • Round tooth profile guarantees that the belt tooth fits smoothly
  • 20 Teeth contact with the belt, that minimizes the chance of the belt slipping

Visit The Website For More Information…