3M Squeegee for Kapton or Blue Tape Application to 3D Printer Build Platforms

4″ x 20-3/4″ squeegee ideal for applying kapton tape and blue painters tape to 3D printer build platforms. Can also be used to apply ink to a screen printing screen.

Not ideal for applying vinyl.

Product Features

  • Use to apply kapton and blue painters tape to 3D printer build platorm
  • Use to apply ink to screen for screen printing
  • 4″ x 20-3/4″
  • Not ideal for applying vinyl

Detailed Information available on our Homepage…

Printrbot Simple 2013 3D Printer Kit, PLA Filament, 1.75mm Ubis Hot End, 4″ x 4″ x 4″ Build Volume

The Printrbot Simple 3D printer kit has an open platform, a frame constructed of machined aluminum and laser-cut birch wood, fabricates objects using PLA (polylactic acid) thermoplastic filament, with a vertical resolution of 100 microns (0.10 mm), and is a kit that requires assembly. The printer can build objects to maximum dimensions of 4 x 4 x 4 inches/102 x 102 x 102 mm (H x W x D). It comes with a direct drive extruder with a cooling fan, and an Ubis hot end that accepts 1.75 mm PLA filament. The printer is commanded through the provided micro USB cable using G-code numerical control instructions. An SD memory card slot can store G-Code instructions on a memory card (sold separately) for operation without a connection to a computer. It can be used with 3D printer management software packages (sold separately). The frame is made of laser-cut birch plywood. Machined aluminum axis rods with linear bearings and injection molded gears help ensure precise movement. The size 17 stepper motors meet the National Electrical Manufacturers Association (NEMA) standard ICS 16-2001. The printer comes with a sample of PLA filament.

Specifications

Printing materialPLA
Vertical (Z-axis) resolution100 microns (0.10 mm)
Build speed80-100 mm/min
Build volume4 x 4 x 4 inches/102 x 102 x 102 mm (H x W x D)
Printer weight5.25 lb (2.38 kg)
Printer size7 x 8 x 9 inches (H x W x D)
Input formatG-code
Input methodMicro USB cable (included) or SD memory card (sold separately)

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

3D printers fabricate physical objects directly from computer-aided-design (CAD) data sources. Objects created by additive manufacturing are built by dispensing successive thin layers of molten material onto a moving platform base from a robotic extruder nozzle. The material is most commonly a thermoplastic or HDPE (high-density polyethylene) filament.

Printrbot manufactures desktop 3D printers and accessories. The company is headquartered in Lincoln, CA.

What’s in the Box?
  • Printrbot Simple 3D Printer Kit (unassembled)
  • 12v 6A laptop style power supply
  • Power cord
  • USB cable
  • Sample spool of 1.75 mm PLA plastic filament

Product Features

  • Fabricates objects from G-code instructions using PLA thermoplastic filament
  • Open platform for ease of access with machined aluminum and laser-cut birch wood frame construction
  • Builds objects to maximum dimensions of 4 x 4 x 4 inches/102 x 102 x 102 mm (H x W x D)
  • Vertical (Z-axis) resolution of 100 microns (0.10 mm)
  • Shipped as a kit that requires assembly

Click Here For More Information

SainSmart Ramps 1.4 + A4988 + Mega2560 R3 + Endstop + MK2B + Cooler Fan Kit for RepRap 3D Printer Arduino Mega2560 UNO R3

This SainSmart 3D Printer Kit with hundreds of Arduino projects is invented
by SainSmart for Arduino lovers. This Kit is recommended for the beginners who
are interested in leaning the basics of Arduino programming as well as the
experts in Programming. Components are included in the kit to get you started
making your own Arduino Projects.

What’s more, a PDF Tutorial Instruction Manual will be provided for you to
download, which can definitely give you a full into to Arduino programming as
well how to use each component included in this
kit. Once you’ve gone through the instruction guide and mastered the basics of
each component go ahead and make your own project combing one or many
components. With this kit you will learn what Arduino is all about and how it is
used.

Package Content

1 x RAMPS 1.4

1 x Mega 2560 R3

5 x A4988 driver

1 x LCD 2004 With Controller

1 x SD card breakout For ramps

1 x Cooler Fan for 3D ramps

6 x Mechanical Endstop with cable

1 x RAMPS 1.4 wiring cable

1 x Heatbed MK2B

1 x USB Cable

Note:Please download the codes & instructions via
the below link:

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-011-962/3D.rar

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/ramps.rar

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/3d+lcd+software/arduino-1.0.1.rar

Product Features

  • Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil.
  • MK2B is the latest and the best type of heatbed money can buy as of today. 100% compatible with all Prusa and Mendel 3d printer variants. Etching: 35um copper. Laminate: FR4 1.6mm
  • Sainsmart RAMPS 1.4 is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. This board is mostly based on Adrian’s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.
  • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.
  • Sainsmart LCD 2004 with Controller This Smart Controller contains a SD-Card reader, an rotary encoder and a 20 Character x 4 Line LCD display. You can easy connect it to your Ramps board using the “smart adapter” included. After connecting this panel to your Ramps you don’t need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.

Visit The Website For More Information…

Printrbot Assembled Simple 2013 3D Printer, PLA Filament, 1.75mm Ubis Hot End, 4″ x 4″ x 4″ Build Volume

The Printrbot Simple 3D printer comes fully assembled, has an open platform, a frame constructed of machined aluminum and laser-cut birch wood, and fabricates objects using PLA (polylactic acid) thermoplastic filament, with a vertical resolution of 100 microns (0.10 mm). The printer can build objects to maximum dimensions of 4 x 4 x 4 inches/102 x 102 x 102 mm (H x W x D). It comes with a direct drive extruder with a cooling fan, and an Ubis hot end that accepts 1.75 mm PLA filament. The printer is commanded through the provided micro USB cable using G-code numerical control instructions. An SD memory card slot can store G-Code instructions on a memory card (sold separately) for operation without a connection to a computer. It can be used with 3D printer management software packages (sold separately). The frame is made of laser-cut birch wood. Machined aluminum axis rods with linear bearings and injection molded gears help ensure precise movement. The size 17 stepper motors meet the National Electrical Manufacturers Association (NEMA) standard ICS 16-2001. The printer comes with a sample spool of PLA filament.

Specifications

Printing materialPLA
Vertical (Z-axis) resolution100 microns (0.10 mm)
Hot endUbis 1.75 mm
Nozzle diameter0.4 mm
Build speed80-100 mm/min
Build volume4 x 4 x 4 inches/102 x 102 x 102 mm (H x W x D)
Printer weight5.25 lb (2.38 kg)
Printer size7 x 8 x 9 inches (H x W x D)
Input formatG-code
Input methodMicro USB cable (included) or SD memory card (sold separately)

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

3D printers fabricate physical objects directly from computer-aided-design (CAD) data sources. Objects created by additive manufacturing are built by dispensing successive thin layers of molten material onto a moving platform base from a robotic extruder nozzle. The material is most commonly a thermoplastic or HDPE (high-density polyethylene) filament.

Printrbot manufactures desktop 3D printers and accessories. The company is headquartered in Lincoln, CA.

What’s in the Box?
  • Printrbot Simple 3D Printer
  • 12v 6A laptop style power supply
  • Power cord
  • USB cable
  • Sample spool of 1.75 mm PLA plastic filament

Product Features

  • Fabricates objects from G-code instructions using PLA thermoplastic filament
  • Open platform for ease of access with machined aluminum and laser-cut birch wood frame construction
  • Builds objects to maximum dimensions of 4 x 4 x 4 inches/102 x 102 x 102 mm (H x W x D)
  • Vertical (Z-axis) resolution of 100 microns (0.10 mm)
  • Machined aluminum axis rods with linear bearings and injection molded gears help ensure precise movement

Click Here For More Information