EAONE 12pcs M6 3D Printer (2x 0.2mm/ 2x 0.3mm/ 6x 0.4mm/ 2x 0.5mm) Extruder Brass Nozzle Print Head for MK8 Makerbot


EAONE 12pcs M6 3D Printer (2*0.2mm+2*0.3mm+6*0.4mm+2*0.5mm) Extruder Brass Nozzle Print Head for MK8 Makerbot

Specification of Brass Nozzle:
Type: Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output diameter: 0.2mm 0.3mm 0.4mm 0.5mm

Attention: Small parts, keep away from children

package including:
2x 0.2mm Nozzle Print Head
2x 0.3mm Nozzle Print Head
6x 0.4mm Nozzle Print Head
2x 0.5mm Nozzle Print Head

Product Features

  • 12pcs M6 3D Printer (2*0.2mm+2*0.3mm+6*0.4mm+2*0.5mm) Extruder Brass Nozzle Print Head for MK8 Makerbot
  • Compatible with all 1.75mm pla abs printer
  • Material: brass
  • Input diameter: 1.75mm; Output diameter: 0.2mm 0.3mm 0.4mm 0.5mm
  • Installation: external M6 thread connection

Detailed Information available on our Homepage…

3D Printer M7 thread MK10 Nozzle Cleaning Kit 1.75MM filament .2mm .3mm .4mm .5mm .6mm .8mm 1.0mm Nozzles and De-clogging Bits + 3.5″ Pin-vise Poor Print Quality Solution

Kit includes: Nozzles/Bits/Pin-Vise

1) MK10 Nozzle for 1.75MM
Material: Brass
Filament inlet: 1.75mm
Fit for: Wanhao Dupicator D4/I3/Dremel and various Makerbot 3D Printers

Please verify that these are the nozzle for you printer. M7 thread MK10

(1 each)

.2mm

.3mm

.4mm

.5mm

.6mm

.8mm

1.0mm

2) Custom bit holding Pin-Vise

Fits 2.0mm and 3.75mm shank bits

3) Nozzle clearing drill bits:

(2 each) 0.2mm 0.3mm 0.4mm

(1each) 0.5mm 0.6mm 0.8mm 1.0mm

Cleaning Information:

These drill bits are of the highest quality you can find but are delicate by nature. Only with the bits can you clear clogs and clean out nozzles of any size. We have bits of larger sizes if you should need them.

The delicate nature of the bits means you must be very careful when using them. Do NOT apply side pressure. North/South movements only. You can clear a cold nozzle if done carefully, but it is HIGHLY recommended that you heat the nozzle first. You can leave it on the printer, or take it off. You can even heat it with a blow-torch after removing, but that will blacken the nozzle. Regardless, the nozzle should be fastened or clamped down if removed to avoid movement. Once you get the nozzle firmly set, use the pin-vise to insert the bit slowly. Spin the bit a few rotations and slowly pull it out. The nature of the bit curves will pull out any clogs and you are back in business!!

Product Features

  • Will clear nozzles and produce finer prints
  • Shipped in protective plastic case
  • M7 thread MK10 printer nozzles .2mm .3mm .4mm .5mm .6mm .8mm 1.0mm
  • De-clogging bits (2 each) .2mm .3mm .4mm (1 each) .5mm .6mm .8mm 1.0mm
  • 3.5″ comfortably held nozzle cleaning pin-vise tool

Click Here If You Need More Detailed Info…

Teenitor 10 Pcs 0.4mm Brass Mk8 Nozzle for For 1.75MM Filament MakerBot Replacement Print Head Extruder 3D Printer parts

Material: Brass
Color: Brass
Quantity: 10 pc
Length: 12mm
Screw thread: M6 x 1.0
Caliber: 0.4mm

Feature:
1.Mk8 nozzle represent improvement over previously used Mk7 nozzle. Mk8 has shorter length of extrusion channel than Mk7, which helps to extrude plastic with less force.
2.for MakerBot Mk8 0.4mm Replacement Nozzle for Replicator 1 & 2 Stepstruder.
3.This nozzle makes printing with PLA easier.

Package includes:
10 x Mk8 nozzle

Product Features

  • Material: Brass
  • Screw thread: M6 x 1.0
  • Caliber: 0.4mm
  • Quantity: 10 pc
  • Teenitor Brand Products.

Visit The Website For More Information…