Happisland Drill Bits for 3D Printer Nozzle Cleaning Kit Pack of 10PCS: 0.2mm 0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm 1.2mm

Pack of 10 PCS: 0.2mm 0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm 1.2mm

Product Features

  • Pack of 10 PCS: 0.2mm 0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm 1.2mm
  • Conveniently colored silicone grip gasket for spinning bits by hand
  • Color is random
  • Note:Don’t use the drill to clean until the nozzle is heated to above 200 degrees
  • Any question,pls feel free to contact us.

Click Here If You Need More Detailed Info…

EasyULT 6 Pack Makerbot Designed Mechanical Endstop Kit Is For 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280

Connection Description:
Red line connecting VCC (ramps of +)
Connect the black wire GND (ramps of -)
Green Line connection SIGNAL (ramps in s)
High quality connection, using 22AWG wire
Inside of copper wire is very thick, can be resistant to current 2A or 300V voltage
A wide range of temperatures, up to 80 degrees
Tips: In normal circumstances, the system must be configured to three mechanical
Length of Cable: 70 cm
Quantity: 6 set

Product Features

  • Mechanical Endstop perfect for any 3D printer (Including Prusa Mendel i2, Prusa i3, MendelMax, Rostock etc…) also for use on CNC machines and other electronic applications.
  • Customized high quality connection, using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees.
  • Pros: Easy to install, the more common styles.
  • Not easy to pull off, easy to install
  • tips: Under normal circumstances, the system must be configured to at least three mechanical switches.

Click Here If You Need More Detailed Info…

Best 3D Printing Build Surface – 4 Pack of 8×8 Square Bases – Print All Filament Types with Strong Adhesion and No Warping – Extreme Hold for ABS, PLA, HIPS, PET+, Brick, and Flexible (TPE) Filaments

Are you having issues with adhesion during printing? Do you find that you’re prints are warping or shifting whilst you’re creating a design?
This set of four adhesive print surfaces is the answer! Their micro textured surfaces create a quick and secure bond as your first layer goes down, tightly gripping your print and giving the stability it needs to turn out perfect!

Easy to remove, once your masterpiece is complete, just slide a pallet knife or print removal tool under the edge and it’ll pop right off!

Durable and hard wearing, these surfaces will protect your print bed and keep your prints perfect for up to 100 prints each. And as we include four in each set, that’s a whole lot of printing!

Whether using a heated or unheated bed, these print surfaces create an instant, secure mechanical lock with your printout, the stability that it provides is unrivalled for printing with ABS, PLA, PETG, HIPS, PET+, brick, and flexible (TPE) filaments and as it installs as a single sheet, its far easier to create a smooth surface than using tapes, glue sticks, sprays or ABS slurry.

Specifications
Size: 8″ x 8″
Maximum Temperature: 200℃/392°F

Product Features

  • PRINTS STAY IN PLACE – The micro textured surface of this SET OF FOUR PRINT SURFACES instantly locks to your 3D model creating a stable base for the perfect print, no raft needed.
  • NO PREP PRINTING – Say goodbye to tape, hairspray and glue sticks, once installed and calibrated, you can print almost any filament onto your new surface without worrying about it coming unstuck.
  • CLEAN AND SIMPLE REMOVAL – At the end of a long print run, your masterpiece will jut pop right off leaving your surface ready for your next work of art!
  • MULTI PURPOSE BUILD SURFACE – These adhesive printing surfaces are great for HEATED and UNHEATED PLATES, and create a stable platform for ABS, PLA, HIPS, PET+, brick, and flexible (TPE) filaments.
  • SIMPLE TO INSTALL – The adhesive backing makes these printing sheets easy to fit, just clean your build plate, remove the backing and lay the surface smooth.

Check Out Our Website For Details…

Witbot MK10 M7 0.4mm Extruder Upgrade Stainless Steel Wear Resistant Nozzle for Makerbot RepRap 3D Printer (Pack of 5pcs)

Specifications:
Bore Diameter: 0.4mm
Size: 13mm * 9mm
Net Weight: 4g/pcs
Material: Stainless Steel

Package Included:
5*MK10 Stainless Steel Nozzle

Product Features

  • 100% brand new and high quality
  • This product is dedicated on MK10 Extruders
  • The nozzle material use the national standard copper
  • Compare with the non-national standard copper, it have obvious differences,our nozzle’s thermal conductive performance is better than the non-national standard copper
  • Hard coating improves service life and reduces down time

Click Here For More Information