►This is The Chimera Extruder Full kit, replacement parts is very easy, so you can easily upgrade your printer. High Speed Volcano Upgrade + High-quality stainless steel nozzle + all-copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))
►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.
►This is the Sharp Volcano Nozzle for upgrade version. Nozzle Ensure Concentricity and Roundness.
►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm
►2 x High quality copper + stainless steel 1.75mm-0.4mm V6 nozzle ►2 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle ►2 x High quality Standard V6 + Volcano +Copper heater block ►2x TC4 titanium alloy + PTFE Teflon Heat Break ►1 x Aluminum alloy Heat sink + PC4-01 Pneumatic fittings ►2 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor ►1 x High Speed 3010 Fan 12V 0.1A 9000±RPM ►2 x Allen wrenc
Can extrude 2 different filaments at the same time!
TC4 Titanium alloy Heat Break – Ultra-low thermal conductivity, Make sure the printer stable operation.
3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
Descriptions: Name: All metal E3D Chimera Extruder with Wires & Cooling fan Multi-extrusion E3D V6 Dual Head Extruder HotEnd Nozzle: 0.4mm for 1.75mm Rated Voltage: 12V Feeder: Long distance feeder.(Bowden) Heater wire: 12V, 40W, Length 1 meter Heating block: 16*16*12mm Cooling fan: 30*30*10mm, with Bracket
Features: Add Multi-Extrusion capability to your machine with the easiest, most versatile, and highest performance HotEnds in the industry. The Chimera. 2 In, 2 Out – Dual Extrusion System.
Notice: There is no Teflon tube inside the Throat pipe.
Item including: 1 Set All metal Dual head extruder. 2 PCS 12v 40w Heater. 2 PCS 100K NTC thermistor. 1 PC Cooling fan with bracket.
Dual input Dual nozzle RepRap 3D Printer bowden print head 1.75mm / 0.4mm
All metal construction, no PTFE parts in hot zone
Experimental, requires previous experience with dual extrusion
3D printer tool kit include 6 pieces 0.4 mm brass extruder nozzle print head, 6 pieces 30 mm length extruder 1.75 mm tube, 3 pieces 0.4 mm cleaning drill bits with 2 pieces hex drivers for MK8 3D printers
3D printer tool set: Anti-leakage and anti-blocking design, outer thread, you can install directly, compatible with most 1.75 mm PLA ABS 3D printer.
Specifications: Nozzle print head: Type: 0.4 mm extruder brass nozzle print head Color: golden Material: brass Oversize: 8 x 13 mm Input diameter: 1.75 mm Output diameter: 0.4 mm
Nozzle inputting tube: Type: nozzle throat Compatibility: 3D printer Outer thread: M6 Nozzle throat outer diameter: 6 mm Nozzle throat inner diameter: 4 mm Pipe inner diameter: 2 mm Length: 30 mm Filament diameter: 1.75 mm Material: stainless steel
Cleaning drill bits: Type: drill bit Bit diameter: 0.4 mm Bit length: 7 mm Shank length: 31 mm
Package include: 6 x 0.4 mm brass extruder nozzle print heads 6 x 30 mm length extruder 1.75 mm tube 3 x 0.4 mm cleaning drill bits 2 x Hex drivers
Attention: 1. Don’t use the drill to clean until the nozzle is heated to above 200 degrees. 2. Small parts, keep away from children.
Package include: 6 pieces 0.4 mm brass extruder nozzle print heads, 6 pieces 30 mm length extruder 1.75 mm tube, 3 pieces 0.4 mm extruder nozzle drill and 2 pieces hex drivers
Nozzle print head: made of brass material; Oversize: 8 x 13 mm; Input diameter: 1.75 mm; Output diameter: 0.4 mm
Nozzle inputting tube: made of stainless steel; inner diameter: 2 mm; Length: 30 mm; Outer thread: M6; Filament diameter: 1.75 mm
Cleaning drill bits: bit diameter: 0.4 mm; Bit length: 7 mm, the length of shank: 31 mm; Comes with a plastic box, convenient to store
Good compatibility: these 3D printer tool kit is compatible with most 1.75 mm PLA ABS 3D printer