Wisamic Clear Borosilicate Glass Heat Bed 220x220x3mm for 3D Printers MK2/MK2A, Anet A8, Anet A6, Reprap, Mendel

If you want to make your printing platform flat enough, ideal stuff is glass sheet. Tempered Silicon glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, tempered glass will quell your frustrations.

Features:
* Borosilicate is a very high temperature glass. It has a melt temperature of about 800° C and a very low thermal expansion coefficient.
* Resistant to thermal shock compared to regular glass.
* Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints.
* Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer.

Specification:
Material: 100% Borosilicate
Size: 220x220x3mm
Thickness: 3mm

Package content:
1 x 220x220x3mm Borosilicate Glass

Product Features

  • Precisely cut and tempered with high transparence. Resistance to scratch and thermal shock.
  • Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface.
  • High binding power when heating. Easy to separate the plastic parts when cooling.
  • Get you out of the trouble when plastic film decreased viscosity after a period of usage.
  • Specially designed to fit the 3D Printers MK2/MK2A, Anet A8, Anet A6, Ultimaker 2+, Reprap, Mendel.

Visit The Website For More Information…

Wisamic 3 Pack 3D Printing Build Surface Heat Bed with 3M Adhesive 220mmx220mm, 10mm Grid, for 3D Printers MK2/MK2A, Reprap, Mendel

Specification:
Dimension: 220mm x 220mm
Thickness: 0.5mm
Color: Black
Compatibility: PLA, PETG, ABS, etc.

Package content:
3 x 3D Printing Build Surface

Product Features

  • Easy installation – This 3D printing build surface has plated with 3M adhesive for easy install on your 3D Printer. Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward.
  • More convenient – Comes with 1cm grid line full printing. Easy to calibrate your 3D printers and the size of your 3D prints. Besides, it is also easy to trim to size with scissors for a smaller print bed.
  • Dimension – 220mm x 220mm; Thickness – 0.5mm
  • Long life – Single sheet installs quickly with less hassle than film or tape. Long print life per sheet. Extend the life of a sheet by wiping with a magic sponge when needed.
  • Compatibility – Works well with PLA, PETG, ABS and more filament types. Specially designed to fit the 3D Printers MK2/MK2A, Reprap, Mendel.

Visit The Website For More Information…

[REPRAPGURU] 213*200*3 Borosilicate glass for heatbed MK2/MK2A for 3D printer, Reprap Prusa i3, Mendel

Tempered Silicon glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. Size: 213mm x 200mm x 3mm Package includes: 1 x Smart glass Please note: The other products show in the picture are not included!

Product Features

  • Made from tempered with high transparence
  • High binding power when heating, easy to separate the plastic parts when cooling
  • Direct print on glass no kapton tape needed
  • 3mm thick borosilicate glass. Size is 213 x 200 x 3mm

Visit The Website For More Information…

Quicka 3d Printer Reprap Mk2/mk2a Heated Bed Borosilicate Glass Plate Glass 213x200x3mm


3mm thick borosilicate glass. Size is 213 x 200 x 3mm

Advantages:

1 borosilicate materials, high transparency.

2 good adhesion when heated, plastic parts easily separated after cooling.

3 eliminates the trouble of replacing the special plastic film, with a special plastic film does not exist

after the weakening of the old sticky problem.

4 print more users, you can buy two rotating.

Shipping list:

MK2 high borosilicate glass x1

Product Features

  • 3mm thick borosilicate glass. Size is 213 x 200 x 3mm
  • Material: Silicon glass
  • good adhesion when heated, plastic parts easily separated after cooling.
  • Shipping list: MK2 high borosilicate glass x1

Detailed Information available on our Homepage…