HESAI RED MK2B PCB Heatbed Hot Plate with LED and Resistor and Cable for Reprap Mendel Prusa 3D Printer Support 12V 24V

Specification:

Power supply:12V or 24v

Laminate FR4 1.6+-0.15mm

Resistance between 1.0 -1.4 ohm(12V)or 3-5 ohm (24V)

Item Size:214mmx 214mm

Package List:

1× MK2B Heatbed with LED,Resistor And Cable

Product Features

  • It features a central mounting hole on the front side to allow for three point mounting
  • Copper plated holes
  • Compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed
  • hese boards are all fully tested to confirm even heat distribution and correct resistance
  • Weld LED,Resistor and Cable

Visit The Website For More Information…

What's Hot Today!

SainSmart Ramps 1.4 + A4988 + MK2B + Mega2560 R3 + LCD 12864 3D Printer Controller Kit for 3D Printers RepRap

This is the new SainSmart 3D Printer Starter Kit, developed specially for those beginners who are interested in 3D printer. You will have a complete set of Sainsmart’s most common and useful electronic components. You may learn about Sainsmart through using these basic projects.

Sainsmart RAMPS 1.4 is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. This board is mostly based on Adrian’s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.

Package List:

1 x RAMPS 1.4
1 x Mega 2560 R3
5 x A4988 driver
1 x LCD 12864 With Controller
1 x SD card breakout For ramps
1 x Cooler Fan for 3D ramps
6 x Mechanical Endstop with cable
1 x RAMPS 1.4 wiring cable
1 x Heatbed MK2B
5 x NEMA 17 Stepper Motors
1 x USB Cable

Note:
Download the doumentation & codes here:
https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/3d+12864/arduino-0023.rar
https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-011-962/3D.rar

Product Features

  • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator.
  • Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil.
  • Sainsmart LCD 12864 contains a SD-Card reader, an rotary encoder and a 128 Character x 64 Line LCD display.
  • SainSmart Mechanical Endstop perfect for any 3D printer. 100% compatible with all Prusa and Mendel 3d printer variants.

Click Here If You Need More Detailed Info…

What's Hot Today!

Wangdd22 3D Printer Parts 100Kohm NTC3950 Thermistors with Cable for 3D Printer Reprap Mend RAMPS 1.4 A4988 MK2B Heatbed(Pack of 10)

Specifications:

Negative temperature coefficient (NTC) thermistor
R @ 25: K100K-1%B25 / 50: K3950-1%
Element: thermistor type MJB2

Characteristics:

Resistance value: R (25 ° C) = 100K ± 1%
Resistance tolerance:± 1%
B value R25/50:3950k
Operating temperature range:-40° C ~+ 300 ° C
Temperature coefficient of resistance:-2 ~ -5% ° C
Maximum rated power:45mW
Dissipation power coefficient:>5mW/° C
Thermal time constant:≤7S

Colour:Milky white
Line length:1m

Package Includes:
10Pcs 100K temperature sensor

Product Features

  • High sensitivity and quick response;
  • Compact structure, easy installation;
  • Wide temperature range, good stability, high reliability;
  • Teflon wire is twice thicker than other similar products in the market. It is not easy to be break off;
  • It adopts white high temperature Teflon wire, resistant to high temperatureof 200 degrees;

Visit The Website For More Information…

What's Hot Today!

MK2B Heated Bed, NTC 3950 Thermistor & Borosilicate Glass Combo

Complete set: 214mm x 214mm MK2B with soldered thermistor, soldered power cord and 214mm x 200mm borosilicate glass plate.

Product Features

  • MK2B: 214mm x 214 mm (8.4 in x 8.4 in) 12V or 24V Heated Bed for MakerBot RepRap UP Mendel I3 Printer
  • Thermistor included: 100K ohm NTC 3950, soldered and installed
  • Borodilicate Glass: 3mm thick, 214mm x 200mm, will not interfere with MK2B mounting screws
  • Soldered power leads
  • Red soldermask and white silkscreen on both sides

Visit The Website For More Information…

What's Hot Today!