8.385”x7.875”x0.22” (213mm X 200mm X 6mm) Borosilicate Heated Bed Glass Plate Works W/ RepRap, MK2, MK2A, Mendel 3D Printers

We offer thick Ultra flat, Ultra durable, borosilicate glass that is ideal for 3d printing, it allows for excellent adhesion of your projects allowing for great prints with excellent surface finishes. Our glass has excellent thermal conductivity keeping the build surface temperature uniform, ensuring the best adhesion possible that is equal across your print. This is ideal for use with ABS or PLA materials, as well as many exotics such as carbon fiber or TPU, just apply AquaNetTM hairspray by lightly spraying the sheet with 2 or more coats and your prints will be stuck to the glass. Either clamp the glass to your build platform or build a glass holder and you will be ready to start printing with your new Glass Plate!

Product Features

  • 3D Printer Glass Heating Bed
  • Works with ReRap, MK2, MK2A, Mendel
  • Borosilicate Glass Print Surface 213 x 200 mm x 6mm thick
  • Edges sanded
  • Rigid 6mm thickness Very flat will not warp

Detailed Information available on our Homepage…

[3D CAM] 3D Printer MK2A 300x200mm XL Size Heated Bed, Borosulicate Glass, Hardware, Wiring, Thermistor Kit for Prusa i3 or other RepRap Upgrade

Upgrade your Prusa i3 for 50% more build volume!

Speed up your reprap heated bed assembly – get all necessary upgrade parts in one kit. You will need 4 paper binder clips to hold glass in place, best source for these clips – ebay.com or your local office supply store.

For Large size 300x200mm Y Carriage Plate for Prusa i3 – check out our store

MK2A 300x200mm Heated Bed Specs:

Dimensions: 315mm x 215mm
Hole Spacing: 309mmx209mm
Laminate FR4 2.0mm
2 Layer, 35µm Copper
Red Soldermask – Both Side
White Silkscreen – Both Side
Power Input: 12V DC
Copper Plated Holes

Borosilicate Glass Specs:

Dimensions: 300mm x 200mm
Thickness: 3mm

NTC 3950 Thermistor Specs:

Thermistor temperature value table for Marlin
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Package contents:

1 x MK2A 300x200mm (315 x 215mm outer size) PCB Heated Bed
1 x Borosilicate Glass Print Surface 300x200mm
1 x NTC 3950 Wired Thermistor (wiring is 1 meter long)
1 x Power wiring (2 wires, 1 meter long each)
4 x M3x05 x 25 Stainless socket head screws
4 x M3x05 Steel Locknuts
8 x M3x9 Steel Washers
1 x Silicone Rubber Spacer, about 50mm long

Product Features

  • Upgrade your Prusa i3 for 50% larger print size and volume
  • Get all necessary bits in one kit
  • Compatible with our XL size Prusa i3 carriage
  • Use it with 12V Power Source

Visit The Website For More Information…

Anycubic MK2B Dual Power PCB Heatbed Hot Plate with Led and Resistor Cable for 3D Printer Prusa Mendel Update of MK2A


Power supply:12V or 24v

2 layer with 35μm copper

Resistance between 1.0 and 1.2 ohm

Package Size:20.5cm×20.5cm×2cm

Package Weight:185g

Package List:

1×MK2B Heatbed with LED Resistor And Cable

Product Features

  • It features a central mounting hole on the front side to allow for three point mounting
  • Copper plated holes
  • Compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed
  • These boards are all fully tested to confirm even heat distribution and correct resistance

Detailed Information available on our Homepage…

3D printer PCB hot bed Mk2b 12/24 dual power 214x214mm Mk2a

3D printer PCB hot bed Mk2b 12/24 dual power 214x214mm Mk2a


A heated build platform (HBP) improves printing quality by helping to prevent warping.
This unit features a central mounting hole on the front side to allow for three point mounting. This is much easier for bed leveling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole. A glass plate is highly recommended to provide a truly flat surface and rigidity.
These beds have been etched directly from 35um copper clad, and not plated.
NOTE: This unit does not include pre-soldered resistors and LED.


•Dimensions 214mm (8 7/16 in) x 214mm (8 7/16 in)
•Laminate FR4 1.6+-0.15mm
•2 Layer, 35μm Copper
•Red Soldermask – Both Side
•White Silkscreen – Both Side
•Power Input: 12V/24V DC
•Copper Plated Holes

Package included:

•1x PCB Heatbed MK2B

Product Features

  • White Silkscreen – Both Side
  • Power Input: 12V/24V DC
  • Red Soldermask – Both Side
  • Laminate FR4 1.6+-0.15mm
  • 2 Layer, 35μm Copper

Click Here If You Need More Detailed Info…