3D Printer M7 thread MK10 Nozzle Cleaning Kit 1.75MM filament .2mm .3mm .4mm .5mm .6mm .8mm 1.0mm Nozzles and De-clogging Bits + 3.5″ Pin-vise Poor Print Quality Solution

Kit includes: Nozzles/Bits/Pin-Vise

1) MK10 Nozzle for 1.75MM
Material: Brass
Filament inlet: 1.75mm
Fit for: Wanhao Dupicator D4/I3/Dremel and various Makerbot 3D Printers

Please verify that these are the nozzle for you printer. M7 thread MK10

(1 each)

.2mm

.3mm

.4mm

.5mm

.6mm

.8mm

1.0mm

2) Custom bit holding Pin-Vise

Fits 2.0mm and 3.75mm shank bits

3) Nozzle clearing drill bits:

(2 each) 0.2mm 0.3mm 0.4mm

(1each) 0.5mm 0.6mm 0.8mm 1.0mm

Cleaning Information:

These drill bits are of the highest quality you can find but are delicate by nature. Only with the bits can you clear clogs and clean out nozzles of any size. We have bits of larger sizes if you should need them.

The delicate nature of the bits means you must be very careful when using them. Do NOT apply side pressure. North/South movements only. You can clear a cold nozzle if done carefully, but it is HIGHLY recommended that you heat the nozzle first. You can leave it on the printer, or take it off. You can even heat it with a blow-torch after removing, but that will blacken the nozzle. Regardless, the nozzle should be fastened or clamped down if removed to avoid movement. Once you get the nozzle firmly set, use the pin-vise to insert the bit slowly. Spin the bit a few rotations and slowly pull it out. The nature of the bit curves will pull out any clogs and you are back in business!!

Product Features

  • Will clear nozzles and produce finer prints
  • Shipped in protective plastic case
  • M7 thread MK10 printer nozzles .2mm .3mm .4mm .5mm .6mm .8mm 1.0mm
  • De-clogging bits (2 each) .2mm .3mm .4mm (1 each) .5mm .6mm .8mm 1.0mm
  • 3.5″ comfortably held nozzle cleaning pin-vise tool

Click Here If You Need More Detailed Info…

MK10 Extruder Hotend for Wanhao Duplicator Maker Select FlashForge 3D Printer

* Brand New and High Quality * Fast shipping from California Item specification: Nozzle extrusion diameter: 0.4mm Nozzle, Throat and Heater Block thread size: M7x1 Length: 40mm Size of PTFE liner tube: 4mm OD 2mm ID Compatible with: FlashForge Creator, Wanhao or other Makerbot You will get: 1 x MK10 Extruder Stainless throat barrel, M7x1 threaded. 1 x PTFE liner tubing 4mm OD x 2mm ID. 1 x MK10 Extruder Nozzle, M7x1 threaded. 1 x MK10 Heater block, M7x1 threaded. Please note : This is High Quality After-Market part

Product Features

  • Nozzle extrusion diameter: 0.4mm
  • Nozzle, Throat and Heater Block thread size: M7x1
  • Length: 40mm
  • Size of PTFE liner tube: 4mm OD 2mm ID
  • Compatible with: FlashForge Creator, Wanhao or other Makerbot

Visit The Website For More Information…

Witbot MK10 M7 0.4mm Extruder Upgrade Stainless Steel Wear Resistant Nozzle for Makerbot RepRap 3D Printer (Pack of 5pcs)

Specifications:
Bore Diameter: 0.4mm
Size: 13mm * 9mm
Net Weight: 4g/pcs
Material: Stainless Steel

Package Included:
5*MK10 Stainless Steel Nozzle

Product Features

  • 100% brand new and high quality
  • This product is dedicated on MK10 Extruders
  • The nozzle material use the national standard copper
  • Compare with the non-national standard copper, it have obvious differences,our nozzle’s thermal conductive performance is better than the non-national standard copper
  • Hard coating improves service life and reduces down time

Click Here For More Information

BHY Heating Block Aluminum Replacement Part Repair Accessory for MK10 3D Printer

Heating Block Aluminum Replacement Part Repair Accessory for MK10 3D Printer
Before you buy it, please make sure you know how to use it, thanks.

Compatible:For MK10 3D Printer

Package included:
1x heating block

Note:
Only one heating block,the nozzle is not included.

Product Features

  • Brand new and high quality.
  • Compatible for MK10 3D Printer
  • Package included: 1x heating block
  • Before you buy it, please make sure you know how to use it, thanks.
  • Note: Only one heating block,the nozzle is not included.

Visit The Website For More Information…