Micromake 3d Printer Parts Kossel Reprep Plastic Injection New Auto-level Effector with J-head Nozzle Full Assembly

Description:
This is Micromake upgraded full assembly new auto-level effector, which has outstanding quality and the best performance for DIY and professional systems.
We add dedicated cooling fan to fit our well-designed double duct so that the consumble can cool quickly after it is extruded. Meanwhile, it can avoid to drop down so the effect of hollow out, high-deviated print and long-distance bridge is better.
And it will need no long time to wait the previous part to cool down at the condition of high speed. With the same effect, you can use faster speed to print. We upgrade auto-level system, add spring to assist the springback, with the high precision injection molding, the accuracy of the probe improved significantly.
Specifications:
The extrusion nozzle: 0.4mm
Chock: 1.75mm
The material of Print: 1.75 PLA/ABS
The flow rate of Nozzle: about 24cc / h
Sports shaft speed:40mm/s
The voltage of heating nozzle: 12V
The operating voltage of cooling fan: 12V
Heating rods: 6mm, 12V, 30Wv Net weight: 270g
Normal working temperature: 190°-230°
NOTE: Make sure the maximum temperature is less than 280°
Feature:
42mm high quality stepper motor with larger torque and less heat buildup
Special ceramic insulation cotton ensures the stability of heating; electricity-saving
Direct transmission, without the heavy gears, compact size and weight
Package list:
Plastic Injection Effector Set
Two fan(one cooling fan, one radiator fan)
E3D Extruder J-Head Nozzle

Product Features

  • Make sure the maximum temperature is less than 280°
  • The extrusion nozzle: 0.4 mm
  • Full assembly new auto-level effector outstanding quality and the best performance for DIY and professional systems.
  • And it will need no long time to wait the previous part to cool down at the condition of high speed. With the same effect, you can use faster speed to print. We upgrade auto-level system, add spring to assist the springback, with the high precision injection molding, the accuracy of the probe improved significantly.
  • We add dedicated cooling fan to fit our well-designed double duct so that the consumble can cool quickly after it is extruded. Meanwhile, it can avoid to drop down so the effect of hollow out, high-deviated print and long-distance bridge is better.

Visit The Website For More Information…

What's Hot Today!

Micromake V2.1.4 Control Board 2 Finished Main Motherboard 3D Printer Parts

Design Highlights:
1. Replace A4988 with the DRV8825 drive of better performance.
2. USB converted to serial port module use a dedicated serial port chip to solve the problem that the Compact Edition of Windows can not install driver.
3. with a hot bed heating output and temperature sensing, the interface of power supply supports DC and wiring terminals.
If heating bed needed, wiring terminals version is recommended.
So please note it if you need it, or we will automatically send DC version and also comes the wiring terminals for the all-by-yourself change later.
4. The power supply is 7805, more stable and reliable than the 1117, but only supports 12V.
Warning:
1. Before powering on, please confirm that the top is positive and the below is negative(positive or negative portion of the partial adapters may be different).
2. Please don’t plug the motor when connecting with the power, it’s easy to damage the drive. Do not adjust the current when the motor is working.
The right way is to disconnect power first, then disconnect the motor, and next re-connect the power, adjust the potentiometer, test the voltage on the potentiometer until the voltage is same with the expected value.
Specifics:
Type: Micromake 3D Printer Controller Board
Compatible: Ramps1.4, 2004LCD control panel,12864LCD control panel
Heated Bed: Support
Power: 19-24V DC
Default reset position:0
Default constructor Size: approx.230*225*205
Power supply: 7805
Limited switches: Three-way
Fan Interfaces: Three-way
Temperature sensors: Three-way (PT100, -200-650 )
Fan connectors: Adjustable
LED Interface: Adjustable
Two-color printing: support
Circuit board: high-quality 4-layer panels, heat dissipation, two-shelf ramps.

Product Features

  • 1. Gather all the functions on a single board to solve the frequent problem such as complicated interfaces of Ramps1.4 set.
  • 2. Using TI’s DRV8825 as a motor-driven parts, its performance is perfect than 4988; with SOP package, the heat dissipation gets better; default to 16 segments but can support 32 segments.
  • 3. The circuit board is made of high-quality 4-layer panels and particularly optimize its heat dissipation; ramps are in 2 shelves.
  • 4. Sophisticated 7805 dedicated power chip, which only supports 12V power input, solves the serious heating problems of 1117 chip for Mage2560.
  • 5. Can be connected directly to Ramps1.4, 2004LCD control panel and 12864LCD control panel.

Visit The Website For More Information…

What's Hot Today!