EasyULT 6 Pack Makerbot Designed Mechanical Endstop Kit Is For 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280

Connection Description:
Red line connecting VCC (ramps of +)
Connect the black wire GND (ramps of -)
Green Line connection SIGNAL (ramps in s)
High quality connection, using 22AWG wire
Inside of copper wire is very thick, can be resistant to current 2A or 300V voltage
A wide range of temperatures, up to 80 degrees
Tips: In normal circumstances, the system must be configured to three mechanical
Length of Cable: 70 cm
Quantity: 6 set

Product Features

  • Mechanical Endstop perfect for any 3D printer (Including Prusa Mendel i2, Prusa i3, MendelMax, Rostock etc…) also for use on CNC machines and other electronic applications.
  • Customized high quality connection, using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees.
  • Pros: Easy to install, the more common styles.
  • Not easy to pull off, easy to install
  • tips: Under normal circumstances, the system must be configured to at least three mechanical switches.

Click Here If You Need More Detailed Info…

Witbot MK10 M7 0.4mm Extruder Upgrade Stainless Steel Wear Resistant Nozzle for Makerbot RepRap 3D Printer (Pack of 5pcs)

Specifications:
Bore Diameter: 0.4mm
Size: 13mm * 9mm
Net Weight: 4g/pcs
Material: Stainless Steel

Package Included:
5*MK10 Stainless Steel Nozzle

Product Features

  • 100% brand new and high quality
  • This product is dedicated on MK10 Extruders
  • The nozzle material use the national standard copper
  • Compare with the non-national standard copper, it have obvious differences,our nozzle’s thermal conductive performance is better than the non-national standard copper
  • Hard coating improves service life and reduces down time

Click Here For More Information

High Quality 3D Printer Parts Upgraded Universal Extruder Kit for Makerbot MK8 Extruder Delta I3 1.75mm PC Plastic

Product description: The extruder adopts compact manner without spring, so it’s stable that won’t affected by the change of the spring. It’s easy to assemble with simple structure and neat appearance. The extruders are injection molded with imported PC plastic materials. Matte surface treatment makes it with good texture. Optimized design with automated feeding. Compared with ABS injection molded parts, the PC parts own the advantages that 1. no deformation during the long-term use 2. high surface finish quality of PC material makes the feed process more smoothly 3. the feeding more stable, and 4. better wear sturdy. Application: Applies to 1.75MM filament, Quick Coupler Fittings of PC4-M5, 4*2 Teflon feed tube. The extruder supports both short and long distance feeding. Users can use it based on their own needs for free combination. Applicable models: XYZ, I3, Delta (Kossel), Hbot and Ultimaker, etc. . Customized colors are available, please contact us for more details. Shipping list PC extruder* 1 set PC4-M5 Push * 2pcs 604UU guide wheel * 1pc Note: The motor fixing screws and the drive gear are NOT included in the shipping list. Customers need to get them based on their own needs. To ensure a better extrusion performance, we recommend to use it with the Mold Steel Linear Drive Gear

Product Features

  • Model Number:Universal Extruder
  • Application:3D Printing
  • Material:Imported PC plastic raw materials
  • Both short and long distance feeding:Support
  • Right Side and Left Side for option:YES

Visit The Website For More Information…

T&B 3D Printer 0.4mm Extruder Nozzle Cleaner Micro Drill Bit Extruder Head Cleaner for MK7 MK8 Makerbot RepRap Felix more 1.75mm filament ABS PLA 5PCS

Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These micro dtill bits are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints.
Specifications:
Bit diameter: 0.4mm
The bit length: 16mm
The length of shank: 20mm
Please kindly note:
Don’t use the drill to clean until the nozzle is heated to above 200 degrees!
Package Included:
5 x 0.4mm Drill Bits

Product Features

  • ✔Bit diameter: 0.4mm
  • ✔The bit length: 16mm
  • ✔The length of shank: 20mm
  • ✔Will clear nozzles and produce finer prints
  • ✔Extends nozzle life

Click Here For More Information