7.1“ LEVILUNA Magnetic Levitating Moon Lamp, Wireless Power Supply, Unibody Seamless 3D Printing, PLA Material, 6000K Cool White, Floating LED Light

LEVILUNA Magnetic Levitating Moon Lamp

NOTICE
Read the Instruction Carefully!
At First, It Would Be Pretty Difficult to Mount The Lamp Onto the Balance Point.
Keep Calm, Just Treat It As a Game.
If You Fail Many Times, Take A Break and Watch Our Guiding Video.
After A Few Successful Tries, You Will Be Practiced.
There Are 2 Wooden Plate to Assist Finding the Balance Point. It Is Not Suggested to Use Them.
Be Ware. On One of the Plate, There Is a Needle Covered By A Rubber. Don’t Forget to Cover It Again After Use.

Parameters:
Magnetic Force > 3N
Levitation Height : 8-12mm
Color Temperature : White 6000K
Light Power : 1W
Suggested Working Temperature : 0 ~ 40°C
Suggested Working Humidity: 10%~90%RH
Base Material : ABS
Lamp Material : High Transmittance PLA Material
Average Shell Thickness : 3mm
Voltage : 100~240V to 15/12V
Power : 6W
Moon Weight : 360g
Base Weight : 600g

Product Features

  • 【Magnetic Levitating】 – 3 Years of Technical Research & 5 Times super Magnetism, to Enable The Moon to Hover&Rotate in the Air Stably.
  • 【Wireless Power Supply】 – By Adopting Electromagnetic conversion, The Lamp Sphere Gets Rid Of Power Cord, Being Able To Float Independantly, Just Like the Moon.
  • 【Seamless Forming】 – a Unibody Moon Reproducing the Moon Surface Precisely by High-resolution 3D Printing.
  • 【Quality Guarantee】 Gurantee Refund or Replacement for Defective Lamps.

Check Out Our Website For Details…

Kastar LCD 48W 12V 4A 5.5*2.5 AC Adapter Replacement for LCD Monitor, LED Strip Light, Computer Project, Coffeemaker, Air Cleaner, 3D Printer, Massage Instrument, Wireless Router, Fingerprint Machine

This AC Adapter Replacement for LCD Monitor, LED Strip Light, Computer Project, CCTV Cameras, Coffeemaker, Air Cleaner, 3D Printer, Massage Instrument, Wireless Router, Fingerprint Machine and other Low Voltage Device

Product Features

  • Power Input: AC110-240V Worldwide Input Voltage, Please verify carefully that the DC Output (12V 4A) and connector Tip size (in the pictures) match your original adapter before purchasing.
  • Charge with ultra reliability prevents your LCD Monitor, TV or LED strip lights from overcharging, short circuit, and electronic shock; High energy efficiency – friendly to the environment.
  • OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection).
  • Kastar AC adapter perfect replacement for your original adapter with the highest quality standards for ultimate reliability.
  • Package includes: 1 x Kastar LCD AC Adapter, 1 x 3-Prong extended Power Cord, 1 x Kastar Feedback Card.

Detailed Information available on our Homepage…

YouVogue Moon Night Light PLDM 3D Printing Moon Lamp ,Warm and Cool White Dimmable Touch Control Brightness with USB Charging, Home Decorative Lights Baby Night Light,Diameter (3.15 Inch)

Product name: YouVogue Moon Night Light PLDM 3D Printing Moon Lamp ,Warm and Cool White Dimmable Touch Control Brightness with USB Charging, Home Decorative Lights Baby Night Light
Material: PLA
Surface accuracy : 12.5um
Body color: White
Lighting Color: white and yellow
Bulb: LED
Wattage: 0.1W —-1.5W
Voltage:DC 5V
Charging time: 1.5 hours
Working Time: 6-12 hours (depends on brightness)
Power supply: USB DC 5V

It’s a very cute, fun small moon night light,baby moon lamp.
It looks totally round with a small flat bottom for stand upright (no required additional mount).
The charge port and on/off button are designed in the bottom.
It made by 3D Printed durable environmentally friendly materials that shows your realistic moon surface roughness but touch feeling soft and comfortable.
It is easy to use. It has two colored lights: White and Orange-Yellow. It’s brightness adjustable.
You can control the Light color and brightness by your finger down on the sensor Switch pad on the bottom.
Color control: click sensor pad and color turn to Yellow–White–Closed
Brightness control: holding to touch the sensor pad and switch brightness from bright to dim or dim to bright.
Smart charging chip, when charging, the charging port lights red, full will off.
Lightweight, it will never hurt your kids when play it.
Soft and stable light frequancy .
Good for Creative gift ,Romantic dinner,Art Decor,Imaginary space,Kid’s room nightlight….

Product Features

  • The moon lamp is made by the 3D printer according to the astronomical data and the texture of the real moon.The 3d moon lamp’ material is PLA , is resistant to pressure, anti-fall and durability.
  • The moon light has rechargeable lithium battery .It is very convenient for you to carry and use it.The full moon light can be exchanged into two colors flexibly (Warm/Cold color) by touch switch and change the brightness.
  • The lamp offers an impressively wide 360 degree beam angle.It is romantic presents for your lover.Add interest to display wall,bar,coffee shop,senior restaurant. For Bedroom,bookcase decoration,gifts.
  • In the bedroom ,the night moon light would be a good partner for your kids. The cozy moon light will bring them sweet dream.
  • Please be assured that if you’re not completely satisfied, then contact and we will give you a 100% refund within 100 days of purchase. It is our intention to offer the best customer service on Amazon.

Click Here For More Information

DAZZLE LIGHT 3D Printer PLA Filament 1.75mm Dimensional Accuracy +/- 0.02 mm 2.2 LBS (1KG) Spool, Blue, 3D Printing

Technical details:
1.-1.75mm 1 KG Filament Diameter (Dimensional Accuracy +/- 0.02mm).
2. -PLA (Polylactic Acid) 3D Printer Filament Vacuum Sealed With Desiccant.
3. -Recommended Extrusion/Nozzle Temperature 190°C – 220°C (374°F – 428°F).
4.Spool Diameter: 7.88″ – Spool Width: 2.52″ – Spool Hub Hole Diameter: 2.20″

Product specifications:
Brand: Dazzle Light
Material: PLA
Color: Blue
Diameter: 1.75 mm
Tolerance: +/- 0.02 mm
Weight: 1 KG (approximately 2.2 lbs)
Print temperature: 190℃-220℃ (374℉-428℉)
Print speed: 50-100 mm/s
Base plate temperature: No heating required
Bubble: 100% zero-bubble
Length: 330 m(1082.6 FT)

How to store:
1. Keep material in sealed bag until ready for use.
2. Avoid Water. Keep in dry place.
3. Keep away from heat.
4. Recommended storage temperature: -20 to 50℃.

Worry-Free Warranty:
At DAZZLE LIGHT, we believe in our products. That’s why we back them all with an 18-month warranty and provide friendly, easy-to-reach support.

About DAZZLE LIGHT
DAZZLE LIGHT is a profession Research and Manufacture 3D printer filament and 3D Pen Quality is our number one priority
and we promise to provide 100% satisfaction service. we use 100% USA raw materials to guarantee its smooth and accuracy
that achieves best printing result and Every 3D filament is vacuum sealed and hand checked before fulfilled to you.
If you got any issues, don’t hesitate to contact us, we’re always happy to help.

Product Features

  • ▲ 1.75mm 1 KG Filament Diameter (Dimensional Accuracy +/- 0.02mm)1 KG (approximately 2.20 lbs) Spool,
  • ▲ PLA (Polylactic Acid) 3D Printer Filament Vacuum Sealed With Desiccant
  • ▲ Original ecological material : No smells, No pollution.
  • ▲ Ultra-Smooth: No oily residue, No air bubbles, No kinks or breaks.
  • ▲ Worry-Free Warranty: 360 days free replacement policy ,another We Commitment to refund

Detailed Information available on our Homepage…