DerBlue 5 Meters GT2 2mm pitch 6mm wide Rubber Timing Belt+ 5 Pcs 16 Teeth Aluminum Timing Pulley Wheel for 3D printer CNC(Prusa i3, Kossel, Rostock, TAZ etc)

About Products:
GT2 belts:
Length:5m
Width: 6mm
Material: Rubber
Color: Black
Step: GT2

GT2 pulley:
Hole: 5mm
Teeth: 16
Width: 6mm
Material: Aluminum
Color: silver

Features:
1. GT2 belts and pulleys compliant (GT2 pulley) are popular choices for RepRap tests .
2. The series GT2 belts are specially designed for the linear movement. Use a profile with rounded teeth, which ensures that the belt tooth perfectly and accurately into the pulley groove, so that if one reverses the direction of the pulley, there is no place for the band to move in the groove.
3. For the best performance, which is at least six teeth in contact with the pulley at a given time. This minimizes the possibility of sliding ring and helps to play in reducing even more.

NOTE:
1. No folding, in order to avoid damage to the skeleton material, cause negative impact on the strength of the timing belt.
2. Avoid contact with chemicals (especially strong oxidizing acid, such as concentrated sulfuric acid, etc.).
3. Avoid contact with oil and water for a long-term.
4. When change the timing belt, the belt cannot take out unless the tension of the belt reduced to the lowest level and cannot use non-professional tools to pry it down.

Quality assurance:
we hope you will love our products. If you have any dissatisfaction, please connect us freely. We will try our best to solve the problem even provide you with a free replacement or offering a 100% Money Back Guarantee! Its THAT simple!

Product Features

  • 1. Durable and practical.
  • 2. GT2/2GT timing belt system is designed specifically for linear movement and precision,high positioning accuracy.
  • 3. GT2/2GT pulley Wheel and belt are used together, very convenient to use.
  • 4. GT2/2GT timing belt system round tooth profile guarantees that the belt tooth fits smoothly.
  • 5. pulley Wheel with 16 teeth or grooves is one of the best choices for 3d printer construction which minimizes the risk of the belt slipping.

Visit The Website For More Information…

5 Meter 6mm Width GT2 Timing Belt for Reprap Delta 3D Printer Kossel Rostock

Made from Micromake – Synthetic Rubber reinforced for superior strength.
Resists degradation from sun, ozone and weather.
Performs well in contact with oils and many chemicals.
Remains useful over a wide temperature range.
Displays outstanding physical toughness.
Resists burning inherently better than exclusively hydrocarbon rubbers.
Outstanding resistance to damage caused by flexing and twisting.
These belts are a standard 6mm wide, making them compatible with pretty much any pulley you’d see used on a 3D printer.
Synchronous belts and synchronous wheels are used to cooperate with stepper motor to drive the pulley and parallel manipulator rods of 3D printer for the extrusion of head bottom base.

Specifics:
Brand: Micromake
Model: GT2
Name: Synchronous Belt
Material: fiber reinforced rubber
Belt Width: 6mm
Belt Pitch: 2mm
Package: 1pcs/bag

Warm Tips:
About Size: Size may be 1-3cm/1 inch inaccuracy due to hand measure.
About Color: The precise color of the items may vary depending on the specific monitor, the settings and the lighting conditions.

Package includes:
5 Meters Micromake GT2 Timing Belt 6 mm Wide 2 mm Pitch for Kossel Delta 3D printer

Product Features

  • For 3D Printing applications, GT2 2mm belt system works better than T5, T2.5, it gives better smoothness and accuracy of positioning, resulting in better printing quality.
  • GT2 timing belt system especially suited for linear movement and positioning applications.
  • Highest quality precision timing belt, not cheap replacement.

Visit The Website For More Information…

BALITENSEN K800 Upgrade Diagonal Carbon Push Rods Arm Kit 217mm Length 4x6mm Parallel Arm Fisheye Rods for Delta Mini Kossel 3D Printer Part (6pcs/set)

Specification:
Lenght of carbon rod: 180MM
Outer Diameter: 6MM
Inner Diameter: 4MM

Packing List:
6pcs Carbon Rod With Fisheye bearing

Visit The Website For More Information…

WINGONEER 3D Printer MK8 Remote Extruder Accessories 1.75 Filament All Metal Remote Extruder For MK8 Prusa i3 or Kossel RepRap DIY Kits Aluminum Frame Block Accessory (Right hand)

WINGONEER 3D Printer MK8 Remote Extruder Accessories 1.75 Filament All Metal Remote Extruder For MK8 Prusa i3 or Kossel RepRap DIY Kits Aluminum Frame Block Accessory (Right hand)

1. MK8 remote printer head right hand (not included steppter motor )
2.This is improved version, there are 2pcs Pneumatic fittings so that it feeds more fluently.
3.3D Printer MK8 Bowden Extruder kit v
4.Used for 1.75mm/3mm filament, Reprap, Makerbot
5.Type: Right hand

Specifications
Material:Full Metal Aluminum Alloy
Color: As shown

Package Including
1 x MK8 extruder DIY kits (Right hand version)

Product Features

  • Used for 1.75mm filament, Reprap, Makerbot ,Prusa 3D Printer
  • Equipped with two pneumatic fittings, the feed process more smoothly.
  • Type: Right hand
  • 3D Printer MK8 Bowden Extruder kit
  • Equipped with two pneumatic fittings, the feed process more smoothly, you can make your extruder closer to the print head (reducing brushed remote feeding problems arising from this can to some extent), while the supplies can be placed in a more appropriate position, and not worry about other issues stuck supplies)

Visit The Website For More Information…