Warm Instructions: ►Please keep away from children. ►Please read your 3D printer user manual carefully before installing and using it. ►Please shut off power to the circuit before starting installation work. ►Please don’t use it in others,this product is designed for 3D printer only. ►Please be safe! The temperature of 3D printer accessories could be very high. PLA (190°C-230°C) ABS (230°C-250°C) Heater Block Cotton(＜300°C)
Feature: – Color: Yellow. – Material: Ceramic fiber. – Size:Heating Block Cottons 2.75 x 0.78 x 0.07in(+-0.07in)[70 x 20 x 2mm(+-2mm)] High Temp Tape (0.78in x 108ft)
★ 100% SATISFACTION GUARANTEE: Refund your money in 30 days
★ The heat insulation cotton is manufactured with top-class heat-resistant ceramic fiber material for durable and practical use.
★ This Heater Block Cotton in normal working, may be appear some slight smoke, and the color will turn into dark brown and black is normal, it will not burn! please feel relieved to use!
★ Must pay attention to the Safe working temperature of the 3D printer’s consumable and accessories, May cause high temperature hazards!! PLA (190°C-230°C) ABS (230°C-250°C) Heater Block Cotton(＜300°C)
★ This heat insulation cotton is used for 3D printer nozzle keeping warm, it can be customized according to customer needs, the advantage for keeping the key parts of the 3D printer – heating aluminum block warm, is making the internal temperature flat, saving power,and energy.
Specification of Heating block cotton Material: cotton Size: 62mm*20*2mm +/-0.2mm
Specification of Kapton Material: durable polyimide and silicone Size:12mm*33m Temperature resistance:-50℃ to 280℃
Keep away from small children This Heater Block Cotton in normal working, may be appear some slight smoke, and the color will turn into dark brown and black is normal, it will not burn! please feel relieved to use Must pay attention to the Safe working temperature of the 3D printer’s consumable and accessories, May cause high temperature hazards PLA (190°C-230°C) ABS (230°C-250°C)
WARNING!! 1.3D printer replacement parts, Always shut off power to the circuit before starting installation work. 2.The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury. 3.3D printer initial operation, Do not run the equipment Unattended state. 4.When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state. 5.To ensure the users will use the product safely and properly, Please read your 3D printer manual first and follow the instructions step by step before using the product. 6.Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.
Heat preservation, keep the printer heating evenly and work better
You can Punch Holes or Cut fit size to the cotton.
Recommend Safe Working Temperature : ＜300°C
Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M
Package including:15PCS x 2mm heating block cotton + 1PCS x 6mm Kapton Tape
Kapton tape is the perfect accessory to cover your build platform during a 3D print. Kapton tape is made from a thin layer, 1 mil thick, of Polyimide film. The tape also has a 1 mil thick layer of silicone adhesive. Kapton tape is widely used because of it’s ability to withstand the heating and cooling of a build platform. Certain plastics such as ABS filament adhere particularly well to Kapton tape making it perfect to use when a heated build platform is required. ABS filament will have full adhesion to the Kapton tape at the high build plate temperature required, but it will also release the printed part when the bed cools. The print will be easy to peel or pop right off making Kapton tape the practical choice for any 3D printer build plate.
Dimensions: 12 inches wide by 12 inches wide
1 mil thick Kapton layer
1 mil thick silicone adhesive layer
2 mil total thickness
Comes in a pack of 10 sheets
Each sheet comes on a removable protective liner
The tape can be cut down easily to fit any size shape
Other sizes ranging from 6 to 12 inch widths are available
Dry Application The dry method involves using a flat edge such as a ruler or a credit card to slowly peel and apply the tape while using the straight edge to keep the tape free from bubbles.
Wet Application The wet method is similar to the dry method but involves spraying some soapy water underneath the Kapton tape. Remove the liquid by squeegee or a straight flat edge such as a ruler. This will also remove any air bubbles. The biggest benefit to the wet method is that you can re-position the tape while it is wet because the liquid allows you to easily slide the tape around. Let the Kapton tape fully dry before printing.
Superior quality Kapton polyimide tape for 3D printing
Resistant to high temperatures making it perfect for plastic filaments requiring heated build beds such as ABS
3D prints adhere very well especially under high heat but release cleanly when cooled
Great durability for multiple print cycles without needing to change the tape
Dimensions of 12 x 12 inches, can be cut to size easily