EAONE All-Metal V6 J-Head Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot RepRap 3D Printers


EAONE All-Metal V6 Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot 3D Printers

Specification of All Metal V6 Hotend Full kit:

12V/40W heater, the temperature can up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C)
12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 Tube Fitting

Specification of Extruder Tube:

Type : Nozzle Throat
Outer Thread : M6 M7
Nozzle Throat Outer Diameter:6mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 22.5mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Brass Nozzle:

Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm

Note:
Compatibility:Compatible with all 1.75mm V6 E3D Makerbot 3D printer

Attention: Small parts, keep away from children

package including:
1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.2mm Nozzle Print Head
1 x 0.3mm Nozzle Print Head
2 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
5 x 1.75mm Stainless Steel Nozzles Throat
1 x M4 Hex driver.

Product Features

  • Package Include: All Metal V6 Hotend 12v/40w/1.75mm/0.4mm Extruder Full Kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 5 pcs Extruder Brass Nozzle Print Head(1×0.2mm/1×0.3mm/2×0.4mm/1×0.5mm) , 5 Pcs Stainless Steel Nozzle Throat and M4 Hex driver
  • High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 12V high speed fan, lose heat quickly
  • Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
  • Easy to install: NTC connector with terminal, you can install directly(Hotend is equipped with NTC3950 thermistors)
  • Compatibility: Compatible with all 1.75mm E3D V6 Makerbot 3D printer

Visit The Website For More Information…

What's Hot Today!

XCSOURCE Metal J-Head Hot End 1.75mm Filament Direct Feed Extruder 0.4mm Nozzle Long-distance for RepRap 3D Printer TE561

Features:
Easy to assemble and use.
Comes with a 30mm Fan for cooling.
Can be fitted easily to a bowden extruder set-up thanks to the included pneumatic coupler.
Our hotend is capable of printing high temperature melting point plastics such as nylon and polycarbonate.

Specifications:
Material: Stainless Steel, PVC, Nylon
Voltage: 12V
Power: 40W
High accuracy: 1%
Resistance value at 25℃=100K
Wiring insulation: high temperature teflon/PTFE
Filament: 1.75mm
Nozzle: 0.4mm
Wiring length: 1 meter

Package includes:
1 x Metal J-head Hotend Assembly
1 x Cooling Fan

Product Features

  • Easy to assemble and use. Comes with a 30mm Fan for cooling.
  • Can be fitted easily to a bowden extruder set-up thanks to the included pneumatic coupler.
  • Our hotend is capable of printing high temperature melting point plastics such as nylon and polycarbonate.
  • Voltage: 12V; Power: 40W.
  • Filament: 1.75mm; Nozzle: 0.4mm.

Visit The Website For More Information…

What's Hot Today!

WINSINN 3D Printer Optimized Extruder Hotend Kit Driver Feeder For 1.75mm 3mm Nozzle Filament – RepRap Prusa i3 Bowden E3D J-Head V6 Makerbot MK8 MK10 Kossel Delta Universal Upgrade Accessories Parts


►This is a Optimized version of 3D Printer Extruder. It is very light and compact. It can use a lighter motor, any Bowden-type 3D printer can become a powerful, reliable little beast. It is easy to manually squeeze, remove, load and unload Filament.
At the same time, You only need a hex wrench, you will be able to within a minute to remove the Titan, regardless of the opening and assembly are very easy and fast.

—————————————————————————————————————

►Installation Points: The top surfaces of the two gear s must be flush adjust the pinion accordingly

►We have done thousands times of tests, including strength testing, time testing and so on. It really works well. Let’s try it:))

—————————————————————————————————————

Package include:
►1 x WINSINN Extruder Full kit (All Accessories show as Picture 2)
►Note: This Kit NOT Included Motor, V6 Hotend, Titan Aero

►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))

Product Features

  • Compatible with E3D-V6 Hotend and Titan Aero Upgrade Kit
  • High quality Titan extruder, Very easy to upgrade your printer
  • Filament:1.75mm 3mm PLA / ABS / Flexible / other
  • Suitable For Remote and Short distance
  • Note: This Kit NOT Included Motor, V6 Hotend, Titan Aero

Visit The Website For More Information…

What's Hot Today!

Wangdd22 3D Printer J-head Dual V6 Head Extruder Hotend with 0.4mm Nozzle 12V Cooling Fan and M4 Fisheye Effector Hanging Station for 1.75mm Filament

Description:

V6 Extruder:
●With PTFE in hot regions of our HotEnd we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C.
●This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
●Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.
Specification:
Type: Bowden J-head Dual V6 Hotend
Included: NTC3950 thermistors and 12V 40W heater
NTC 3950 Thermistor parameters:
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Fisheye Effector:
Material: Aluminium Alloy
Scrwe size: M4
This effector fits V6 J-head hotend (bowden and wade),it can hold two J-head together.
Don’t compatible with chimera multi-extrusion hotend and V5 version J-head hotend.

Package includes:
2x long distance V6 J-head extruder with 0.4mm nozzle ,12V heater
2x 12v cooling system
1x dual head M4 effector

Product Features

  • RepRap 3D printer extruder hotend compatible with E3D V6 1.75mm / 0.4mm
  • 12V 40W heater, 12V high speed fan with shroud, NTC 3950 pre-wired thermistor
  • Metal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials
  • Easy No-Solder, No-Tape, No-Adhesive assembly and maintenance.
  • This 3D Printer Dual V6 Hotend is applied for 1.75mm Filament Long-Distance Filament Bowden extruder

Detailed Information available on our Homepage…

What's Hot Today!