SIMPZIA Heat Bed Power Module General Add-on Hot Bed Power Module Expansion Board High Current Load Module Mos Tube Hotend Replacement with Cables for 3D Printer – 2 Pack

Heated Bed Power Module Features:
Based on powerful MOSFET HA210NO6
Dimensions: 70 x 45mm/ approx 2.76 x 1.77″
Distance between holes: 62.8 x 37.8mm/ approx 2.47 x 1.49″
Supply/Operating Voltage: 12V-50V (12-24VDC recommended)
Max Current: 25A (Enhance heat dissipation) safe for prolonged times. ensure active cooling of the heatsink.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)

Package Includes:
1 x Heated Bed Power Module.
1 x Connection cable for input signal
2 x Power cable

Note:
This module under the premise of normal cooling, it work stable under (Max) = 25A, the process of using the current not exceed 25A.

Product Features

  • APPLICATION: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.
  • UNIQUE DESIGN: With unique snowflake heatsink design, it has a great cooling effect. The heat bed power module can be used in both Lerdge motherboard and other 3D printer motherboards.
  • 25A MAXIMUM CURRENT: This high power module helps your 3D printer equipped with the Lerdge controller board become even more powerful. The module can solve the current load problem when the heated bed power is too large. With this add-on module to board lead the maximum current up to 25A.
  • GOOD PROTECTION: When using heated bed 3D printer for 12V power supply which may cause excessive current during times, with this module, it can well protect the connectors on the controller board from burning.
  • PACKAGE INCLUDES: 2 x Heated bed power module (motherboard is not included) and 2 x Connection cable for input signal. BONUS: 4 x Power cables.

Detailed Information available on our Homepage…

5pcs Aluminium V6 Heat Block For RepRap J-head Extruder HotEnd 3D Printers Parts Heater Hot End Heating Accessories 20x16x11.5 mm Part

Throat and the Nozzle Mounting Holes: M6
Heating Rod Mounting Holes: diameter 6mm
Fixed Screw Holes: M3
Thermocouple Mounting Holes: 3mm
Material: Aluminum
Size(mm): 20*16*115
Package Included:
5 x Aluminum Heater Block

Product Features

  • Accept Nozzle with M6
  • Material: aluminum, size: 20 * 16 * 11.5MM, slotted width 1.3MM; heating hole 6.11MM
  • Suitable for Filament : both 1.75mm and 3.0mm M6 Nozzle
  • Package Included: 5pc Aluminium Heat Block

Visit The Website For More Information…

LEANINGTECH 4Pcs 2 Pin Cooling Fan 40x40x10mm DC 12V for 3D Printer Hotend Extruder, Quiet Brushless 7000RPM

Specifications:
Voltage: 12V
Current: 0.12A
Air volume 7CFM
Speed 7000r / min
Wiring Length: 100cm
Weight 20g

Package Content:
4 x 2 Pin Cooling Fan for 3D Printer

Product Features

  • ☢ UNIVERSAL SIZE: 40*40*10mm, These small fans are widely used in humidifier, aromatherapy and other small appliances series like small heat radiating communication equipment, military equipment, intelligent industrial control equipment plate cooling heat and high precision medical equipment(3D printer) as cooling function.
  • ☢ FAST COOL DOWN: With 2-pin dual ball bearing design, these 3D printer fans is with 7CFM high air flow and fast speed up to 7000RPM, at the same time it is pretty quiet when working.
  • ☢ CONNECTOR TYPE: 2 terminal connectors with 2 pin type, portable small size.
  • ☢ BRUSHLESS COOLING FAN: Rated Voltage: DC 12V, Current: 0.12A. With mounting screws, very easy to install.
  • ☢ WHAT YOU GET: 4 packs of cooling fan for 3D printer.

Detailed Information available on our Homepage…

Wangdd22 3D Printer J-head Hotend with Fan for 1.75mm 12v V6 Direct Filament Wade Extruder 0.4mm Nozzle+Volcano kit

Description:
Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer.

Notice: Small parts, keep away from children

Specification:
12V/40W heater,temperature can be up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C)
12V high speed fan with shroud, radiating quickly
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 tube fitting
Volcano heating block
Outer thread : M6 M7
Nozzle throat outer diameter: 6mm
Nozzle throat inner diameter: 4mm
Teflon pipe inner diameter: 2mm
Length of nozzle throat: 22.5mm
Filament diameter : 1.75mm
Extruder brass nozzle input diameter: 1.75mm
Extruder brass nozzle output diameter: 0.3mm 0.4mm 0.5mm
Volcano extruder nozzle output diameter: 0.6mm 0.8mm 1.0mm 1.2mm

Package including:
1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.3mm nozzle print head
1 x 0.4mm nozzle print head
1 x 0.5mm nozzle print head
1 x 0.6mm volcano nozzle print head
1 x 0.8mm volcano nozzle print head
1 x 1.0mm volcano nozzle print head
1 x 1.2mm volcano nozzle print head
1 x volcano heating block
2 x teflon tube within 1.75mm stainless steel nozzle throat

Product Features

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 pcs brass extruder nozzles(1×0.3mm/1×0.4mm/1×0.5mm), 4 pcs brass volcano extruder print head(1×0.6/1×0.8/1×1.0/1×1.2) and a volcano heating block, 2Pcs teflon tube within 1.75mm stainless steel nozzle throat

Visit The Website For More Information…