Notice: 1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts; 2. Please do not use flame to test their heat resistance, because the flame’s temperature is much higher than 300 degrees Celsius (572 Fahrenheit ).
package including: 10PCS heat insulation cotton; One Roll of PTFE High Temp Tape
Compatibility: Matches all 3D print extruder heater block offered from E3D Makerbot, MK8 Makerbot RepRap , etc.
High temperature resistance: Both PTFE tape and heat insulation cotton, short term resistance to temperature 260 degrees Celsius (500 Fahrenheit ), long term resistance to temperature 300 degrees Celsius (572 Fahrenheit )
Function: Keep heater block temperature constant, so that improving the quality of the printed matter, save electricity and prolong the service life of heater and temp sensor
Use-method: You can cut cotton into the right size and hole according to your needs, then stick it firmly with PTFE tape. 5 sides of heater can be wrapped up in cotton, except the surface installed heater wire, but you just need to use 1 piece cotton. You can also use PTFE tape to stick any other parts on your 3D printer
Material: The heating insulation cotton is made from heat resistant ceramic fiber, the tape is made from PTFE
Features of heating tube: Cartridge heater widely applied for 3D printer, model heating, hot-box & other heating devices. Voltage: 12V, power: 40W. Stainless steel material. The wire length approx. 1 meter. The stainless steel part, 6mm diameter, 20mm in length.
Specifications of heating tube: Suitable for: A2/A3/A6/A8 3D Printer etc. Material: Stainless Steel Voltage: 12V Power: 40W Wire Length: Approx. 1m / 39.4in Diameter: 6mm Length: 20mm Quantity: 2pcs
Features of thermistor: NTC pre-wired thermistor for most 3D printers heat bed & extruder. 100K ohm temperature sensor. 3P terminal for connecting. With 1m long high temperature insulated wire. Durable material for long life.
Specifications of thermistor: Suitable for: Anet A2/ A3/ A6/ A8/ E10/ E12 3D Printer. Material: High Temperature Teflon(200°C) Working Temperature Range: -40°C~+300°C Resistance: at 25°C=100K ohm Cable Length: Approx. 1m Quantity: 2pcs Package List: 2 * cartridge heater 2 * thermistor Note: The item only includes the cartridge heater and thermistor.
Thermistor: Working Temperature Range: -40°C~+300°C;
Resistance: at 25°C=100K ohm;
Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring;