V6 Extruder: ●With PTFE in hot regions of our HotEnd we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C. ●This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating. ●Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease. Specification: Type: Bowden J-head Dual V6 Hotend Included: NTC3950 thermistors and 12V 40W heater NTC 3950 Thermistor parameters: High accuracy: 1% Resistance value at 25°C=100K Wiring insulation: high temperature teflon/PTFE Wiring length: 1 meter
Fisheye Effector: Material: Aluminium Alloy Scrwe size: M4 This effector fits V6 J-head hotend (bowden and wade),it can hold two J-head together. Don’t compatible with chimera multi-extrusion hotend and V5 version J-head hotend.
Package includes: 2x long distance V6 J-head extruder with 0.4mm nozzle ,12V heater 2x 12v cooling system 1x dual head M4 effector
RepRap 3D printer extruder hotend compatible with E3D V6 1.75mm / 0.4mm
12V 40W heater, 12V high speed fan with shroud, NTC 3950 pre-wired thermistor
Metal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials
Easy No-Solder, No-Tape, No-Adhesive assembly and maintenance.
This 3D Printer Dual V6 Hotend is applied for 1.75mm Filament Long-Distance Filament Bowden extruder
Make any space yours with 3M Command Picture Hanging Strips, a damage-free solution for decorating your home or office. Ideal for frames and other items 16 pounds or less, these handy strips will lock your pictures securely onto a variety of surfaces. Thanks to the innovative 3M Command adhesive strips, you can mount and remount pictures without damaging your walls- no nails, tacks, or tape required. Available in a several sizes and colors.
Decorate worry-free View larger
Leaves no holes, marks, sticky residue, or stains View larger
Create a wall space that fits your lifestyle View larger
Rearrange and get creative with your living space View larger
Apply and remove photos and pictures easily View larger
Simplify your decorating and organizing View larger
Decorating possibilities abound with 3M Command Picture Hanging Strips. Display framed pictures, lightweight clocks and mirrors, and artwork on just about any wall in your home. Use these hanging strips to mount a dry erase board to your fridge for leaving messages, add pictures and favorite memorabilia to dorm rooms, personalize your office by hanging your diploma and awards. These strips allow you to take command of your space by adding your own personal style. You can easily remove the picture hanging strips without damaging the walls, so you’re free to experiment with new decorating ideas and change your environment as often as you’d like. However you hang it, your item will lock securely into place.
Applying 3M Command Picture Hanging Strips to just about any flat, clean surface is as easy as 1, 2, 3. Allow the adhesive strip an hour to set after application. An ideal alternative to nails, tacks, or tape, 3M Command Adhesive holds strong, yet doesn’t leave a sticky residue or stains. To remove, simply grasp the hook and stretch the 3M Command Strip straight down slowly until the base and strip release from the wall. With 3M Command, redecorating or relocating items is easier than ever.
Clay Hanging Keepsake Kit – Makes 2 Keepsakes — This kit includes 15oz of soft, pliable air-drying clay. The non-toxic clay is safe and easy to use to capture those precious little hands and feet. After you make the impressions, the clay dries into a hard and durable stone-like material in 2-4 days. The keepsake can be displayed as a holiday ornament on a tree, as a wall hanging, or displayed on a table-top easel. Recommended ages: About 0-2 years (if using the 4″ ring). Also great for pets! Kit Includes: One bag of air-drying clay (makes 2 keepsakes of 4″ diameter, or 1 larger keepsake), Plastic cutting ring, 4″ diameter, Wooden rolling pin, Plastic straw hole punch, satin ribbon in yellow & pink and Easy-to-follow instructions.
Soft, White, Pliable Non-Toxic Air-Drying Clay
Makes 2 Keepsakes (possibly 3 depending on desired thickness)