- Material: 304 Stainless steel
100% borosilicate glass, flat, heat resistant plate, does not warp during long term use. 4mm thick – will not break when you remove your print from it.
Plate fully matches 220x220mm heated bed on many popular 3D printers. This plate is larger and thicker than typical 3mm plates sold for use with MK2 heated beds.
Borosilicate glass material has excellent thermal and chemical properties compared to soda lime glass. Resists cracking due to direct high heat, perfect for a 3D printer bed. It is used on top of your heated print bed and provides excellent results. Please make sure your 3D printer will accept this size before making purchase.
Please take a look at the supplied drawing for dimensions and details.
Glass plate features:
Dimensions: 219x219mm, 4mm thick.
100% borosilicate heat resistant glass (it has yellow tint as opposed to soda lame glass green tint).
Cut corners to clear with mounting screws.
Very flat and does not warp during use.
Can be used as 3D printer print surface, with or without heater board.
1 x Borosilicate Glass Print Surface 219x219mm x 4mm thick.
* Suggested bed temperature may vary depends on the filament material;
* Please properly level the bed before printing;
* Never let the nozzle rub against the Ultrabase directly, it will demage the nozzle or lead to clogging;
* Clean the platform surface with alcohol/water.
Temperature settings for different filaments:
2. Flexible filament: 50-70℃
3. ABS:100-125℃ ( 110℃ is recommended )
4. PC:100-130℃ ( 120℃ is recommended )
5. Nelon:90-120℃ ( 110℃ is recommended )
6. PP:100-130℃ ( 120℃ is recommended )
7. PETG: 50-70℃
Usage of Ultrabase Heatbed Kits:
Please kindly visit :
Official Web: www.anycubic3d.com
Youtube Channel: www.youtube.com/watch?v=zDup0gp9pLA
Material: Tempered glass/Inorganic coating/Aluminum
Max Temperature:120 Degree Celsius
Resistance around 0.9 ohm for 12V
Resistance around 3.6 ohm for 24V
Item size: Tempered Glass 220x220x4mm ;Aluminum Heatbed 220x220x1.5mm
Package Weight :870g
1x ANYCUBIC Ultrabase 3D Printer Platform with Heatbed
4x M3X35 Screws
4x M3 nuts
We offer thick Ultra flat, Ultra durable, borosilicate glass that is ideal for 3d printing, it allows for excellent adhesion of your projects allowing for great prints with excellent surface finishes. Our glass has excellent thermal conductivity keeping the build surface temperature uniform, ensuring the best adhesion possible that is equal across your print. This is ideal for use with ABS or PLA materials, as well as many exotics such as carbon fiber or TPU, just apply AquaNetTM hairspray by lightly spraying the sheet with 2 or more coats and your prints will be stuck to the glass. Either clamp the glass to your build platform or build a glass holder and you will be ready to start printing with your new Glass Plate!