Micro SD Extension SD Card Extension Cable Extender Adapter Flexible Cord Male to TF Flash Memory Card Kit Reader Female Soft Flat for Monoprice Select Mini Anet A8 3D Printer/Raspberry Pi/GPS/TV

This SD Extension cable conveniently and inexpensively solves problem which makes the insersion and removal of cards in the SD slot very difficult. 3 kinds of cables to switch (SD to SD/TF to TF/SD to TF), free conversion. Let Upgrade navigation map card and music more convenient. You are deserve to have!

Package:
1 X Soft Flat FPC SD Extender Cable 18.9 inch
1 X WinterSweet Mark

Tips:
1.The memory card not included.
2.The Extension Cable Card Read doesn’t support hot-plugging.

Lifetime Warranty!

Product Features

  • ✔. The SD connection Cable is available long enough for most projects.
  • ✔. Works perfectly.No more wear or tear on your hardware’s SD card port.
  • ✔. It would allows the SD card to be recognized quickly.
  • ✔. SD extender ribbon cable recognize cards larger than 32GB easily.
  • ✔. Support for all products need to use the SD SDHC MMC RS-MMC Micro-SD TF memory Card extension cable 18.9 inch (128MB TO 64GB) Insert the SD card into the SD card slot of the extension cable, then Insert the SD adapter card into the machine (GPS,Car DVD,DVR,3D Printer,Camera,Raspberry Pi,Kindle,3D Mapping,Macbook,Arduino,TV kit, LED/LCD screen,Mobile phone/Smartphone,Outdoor advertising screen, Large minitoring instrument,etc.)

Click Here If You Need More Detailed Info…

What's Hot Today!

220mm x 220mm Borosilicate Glass Plate / Bed w/ Flat Polished Edge for MK2 MK3 Heated Bed 3D Printer

Glass is a universal print surface for 3D Printing. Almost all types of filament will print to glass in one way or another. Just place the glass on your print board and clip it in place! To print with ABS or PLA, lightly spray the surface of the glass with AquaNetTM hairspray, then install the glass. For Nylon, we’ve found a light coating of UHU Glue stick seems to do the trick! If you don’t yet have a glass surface, you’ll want this one! This glass has been specially ordered and modified for use in 3D Printers. This type of glass is not available at your local hardware store or big box home center. Size: 8.66″ x 8.66″ x 0.125″ (220mm x 220mm x 3mm), good fit most of I3 MK2 MK3 Heated Bed 3D Printers.

Product Features

  • Size: 8.66″ x 8.66″ x 0.125″ (220mm x 220mm x 3mm)
  • To print with ABS or PLA, lightly spray the surface of the glass with AquaNetTM hairspray, then install the glass.
  • Flat Polished Edge for safe to handle

Click Here For More Information

What's Hot Today!

TOOTO 213mm*200mm*3mm 3D printer Borosilicate Glass plate High boron silicon toughened Bed Flat Polished Edge for MK2 MK3


Description:
Size: 213*200*3mm
Thickness: 3mm
Material: Borosilicate Glass
Application:
For Reprap 3D printer heading bed use

Features:
1. Using High Boron Silicon Material, High Transparency;
2. There has good adhesion When heated, easy separation after cooling of plastic parts;
3. SavING the replacement of special plastic film troubles, There is no viscosity reducing problem when special plastic film used;
4. For the user who use 3D printer more frequently, You can buy two piece to replace.

Package:
1 piece glass plate

Product Features

  • Size: 213*200*3mm
  • To print with ABS or PLA, lightly spray the surface of the glass with AquaNetTM hairspray, then install the glass.
  • Fit MK2 MK3 Heated Bed 3D Printers w/ 213mm X 200mm print platform
  • Flat Polished Edge for safe to handle

Detailed Information available on our Homepage…

What's Hot Today!

300mm Basalt Build Platform for 3D Printer Extremely Flat and will NOT WARP

Our basalt (a volcanic glass) premium bed substrate is the best material for 3D printing. Attach to any of our silicon rubber heaters via silicone rubber adhesive (available at any auto parts store) or by clamps or supply your own method of heating. The basalt has a ground flat (no warping when heated!) and mirror polished surface while still maintaining a degree of porosity which helps plastic stick readily to it when heated. After a finished print the basalt retains heat for a gentle cool down period that helps the printed part resist warping. Parts pop right off when cool.

SILICONE RUBBER OR ALTERNATIVE HEATING ELEMENT REQUIRED.

8lbs+ Please make sure your machine can handle this much weight.

Product Features

  • The Flattest Build Surface In the Industry
  • Will Not Warp Even Under Extreme Heat
  • ABS Prints WILL NOT WARP Even When Hollow
  • Requires Silicone Rubber or PCB Heater For Maximum Effectiveness
  • Adhere Heater with Silicone Directly to Bottom For Maximum Heat Transfer

Visit The Website For More Information…

What's Hot Today!