Wangdd22 3D Printer J-head Dual V6 Head Extruder Hotend with 0.4mm Nozzle 12V Cooling Fan and M4 Fisheye Effector Hanging Station for 1.75mm Filament

Description:

V6 Extruder:
●With PTFE in hot regions of our HotEnd we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C.
●This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
●Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.
Specification:
Type: Bowden J-head Dual V6 Hotend
Included: NTC3950 thermistors and 12V 40W heater
NTC 3950 Thermistor parameters:
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Fisheye Effector:
Material: Aluminium Alloy
Scrwe size: M4
This effector fits V6 J-head hotend (bowden and wade),it can hold two J-head together.
Don’t compatible with chimera multi-extrusion hotend and V5 version J-head hotend.

Package includes:
2x long distance V6 J-head extruder with 0.4mm nozzle ,12V heater
2x 12v cooling system
1x dual head M4 effector

Product Features

  • RepRap 3D printer extruder hotend compatible with E3D V6 1.75mm / 0.4mm
  • 12V 40W heater, 12V high speed fan with shroud, NTC 3950 pre-wired thermistor
  • Metal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials
  • Easy No-Solder, No-Tape, No-Adhesive assembly and maintenance.
  • This 3D Printer Dual V6 Hotend is applied for 1.75mm Filament Long-Distance Filament Bowden extruder

Detailed Information available on our Homepage…

What's Hot Today!

BALITENSEN 6pcs of K800 Upgrade Diagonal Carbon Push Rods Arm Kit 217mm Length 4x6mm Parallel Arm Fisheye Rods for Delta Mini Kossel 3D Printer Part

Specification:
Lenght of carbon Rod: 180MM
Total Length: 217mm
Outer Diameter: 6MM
Inner Diameter: 4MM

Package:
6* Carbon Rod With Fisheyes

Product Features

  • The whole set has six parallel manipulator.
  • 217MM Length, 4*6mm Parallel Arm Fisheye Carbon Rod Kit Set.
  • K800 upgrade Diagonal Push Rods Kit – 3D Printer Delta Kossel.
  • M3 screw is used in knuckle bearing.
  • High Accuracy.

Visit The Website For More Information…

What's Hot Today!

Kossel Delta 3D Printer Parts Parallel Manipulator Fisheye Carbon Rod 3D Printer Accessories

The whole set has six parallel manipulator, the length of the sway rod is 217mm, the OD of the carbon fiber rod is 5mm and the ID is 3mm. M3 screw is used in knuckle bearing.
Online Skydrive provide the upgraded magnet fisheye non-standard STL, you can print to change by yourself.
OD: 5mm
ID: 5mm
Length: 217mm
Use the professional metal mold to ensure the length is same. Improve the accuracy

Product Features

  • The whole set has six parallel manipulator, the length of the sway rod is 217mm, the OD of the carbon fiber rod is 5mm and the ID is 3mm. M3 screw is used in knuckle bearing.
  • Online Skydrive provide the upgraded magnet fisheye non-standard STL, you can print to change by yourself.
  • Use the professional metal mold to ensure the length is same. Improve the accuracy
  • Kossel 3D Printer Fisheye Carbon Rod

Visit The Website For More Information…

What's Hot Today!

3D Printer Accessories M3 Delta Kossel Fisheye Effector Hammock 3MM by astchev

We’re sure astchev would love to see what you’ve printed. Please document your print and share a Make with the community.

To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).

What's Hot Today!