Cheetah TPU 3D Printing Filament – 1.75mm .5kg – FIRE

Cheetah flexible filament is the fastest and easiest to print flexible filament on the market. The focus in development of this material was on optimizing the user experience. The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market. Cheetah filament possesses industry leading durability along with impact strength 84% greater than ABS. The abrasion resistance is also second only to NinjaTek Armadillo product, making Cheetah the perfect blend of speed, toughness and strength. Suggested Applications: seals, plugs, hinges, sleeves & snap-fit parts KEY FEATURES: Abrasion resistance 40% better than ABS and 76% better than PLA 580% elongation capabilities improve ability to withstand wear and tear Patented low friction exterior allows for smooth feeding Chemical resistance to many materials, including: naphtha, ASTM Oils #1-3, petroleum and Freon Consistent diameter and material properties providing reliable, high quality prints REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature:  235°C – 245°C  Platform Temperature: Room temperature – 40°C Glue or blue painters tape is suggested if not using a heated bed. Print Speed:  Top and bottom layers: 30-45 mm/ sec (600-1200 mm/ min) Infill speeds: 60-80 mm/ sec (3600-4800 mm/ min) Layer 2+ use cooling fan if available.

Product Features

  • Print at speeds greater than 60 mm/sec
  • Impact resistance: 84% > ABS
  •  Industry leading toughness and durability
  • Shore Hardness = 95A
  • Suggested Applications: seals, plugs, hinges, sleeves & snap-fit parts

Check Out Our Website For Details…

Cheetah TPU 3D Printing Filament – 3mm .75kg – FIRE

Cheetah flexible filament is the fastest and easiest to print flexible filament on the market. The focus in development of this material was on optimizing the user experience. The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market. Cheetah filament possesses industry leading durability along with impact strength 84% greater than ABS. The abrasion resistance is also second only to NinjaTek Armadillo product, making Cheetah the perfect blend of speed, toughness and strength. Suggested Applications: seals, plugs, hinges, sleeves & snap-fit parts KEY FEATURES: Abrasion resistance 40% better than ABS and 76% better than PLA 580% elongation capabilities improve ability to withstand wear and tear Patented low friction exterior allows for smooth feeding Chemical resistance to many materials, including: naphtha, ASTM Oils #1-3, petroleum and Freon Consistent diameter and material properties providing reliable, high quality prints REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature:  235°C – 245°C  Platform Temperature: Room temperature – 40°C Glue or blue painters tape is suggested if not using a heated bed. Print Speed:  Top and bottom layers: 30-45 mm/ sec (600-1200 mm/ min) Infill speeds: 60-80 mm/ sec (3600-4800 mm/ min) Layer 2+ use cooling fan if available.

Product Features

  • Print at speeds greater than 60 mm/sec
  • Impact resistance: 84% > ABS
  •  Industry leading toughness and durability
  • Shore Hardness = 95A
  • Suggested Applications: seals, plugs, hinges, sleeves & snap-fit parts

Check Out Our Website For Details…

Want A Leak-Proof Camper? Better Fire Up The 3D Printer Now.

Ah, the great outdoors.  Rejuvenating air rife with mosquitoes and other nasties, and spending some time hanging out in the woods sleeping in a 3D printed camper. Wait– what was that last one again?

Yep, it’s exactly what it sounds like. A Canadian team headed by [Randy Janes] of Wave of the Future 3D, printed a camper at [Create Cafe] in Saskatoon, Saskatchewan, using high-flow nozzles on one of the largest 3D printers in North America. These layers are 10.3mm thick!!

This trailer is one single printed piece, taking 230 hours — nine and a half days — of straight printing with only a few hangups. Weighing 600lbs and at 13 feet long by six feet wide — approximately 507 cubic feet, this beats the previous record holder for largest single piece indoor print in size by three times over.

As a prototype, this is an impressive feat, but what about going forward? [Janes] has said that he’s already been approached by buyers because of the prospect of completely customizeable design — this prototype can convert into an ice fishing hut — and boasts no seams which means no leaks! If you’ve never woken up to a soaked-through sleeping bag, it is not pleasant.

We can’t 3d print a whole car — yet — but we can produce replacement car and motorcycle parts and hack them into awesome near-future functionality.

[Thanks for the tip, Qes!]

NinjaFlex TPU 3D Printing Filament – 1.75mm .50kg – FIRE

NinjaFlex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and ovality (roundness) outpaces other polyurethane materials.

Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders.

Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications.
SDS &

KEY FEATURES:

  • Shore Hardness = 85A
  • Truly flexible (no fill or layer manipulation required to achieve performance)
  • 660% elongation allows for repeated movement and impact without wear or cracking 
  • Polyurethane composition allows for excellent vibration reduction
  • Patented low friction exterior allows for smooth feeding
  • Abrasion resistance 20% better than ABS and 68% better than PLA
  • Consistent diameter and material properties providing reliable, high quality prints
  • Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and freon
  • Adheres to all standard build platforms without glue or tape
  • REACH and RoHS 2002/95/EC Directive compliant

PRINTING GUIDELINES:

  • Extruder Temperature:  225°C – 235°C
  • Platform Temperature: Room temperature – 40°C
    Glue and/ or blue painters tape is suggested if not using a heated bed.
  • Print Speed: 
    Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min)
    Infill speeds: 15-35 mm/ sec (900-2100 mm/ min)
    Layer 2+ use cooling fan if available.

Product Features

  • Truly flexible – no fill or layer manipulation required to achieve performance
  • 660% elongation allows for repeated movement & impact without wear or cracking
  • Excellent vibration reduction
  • Shore Hardness = 85A
  • Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications.

Check Out Our Website For Details…