3D Printer 0.4mm Nozzle Extruder MK8 Latest Upgrade Print Head for 3D Printer

Print Material: ABS 1.75MM, PLA 1.75MM
Extrusion nozzle : Standard 0.4mm
Nozzle flow rate: about 24cc / h
Sports shaft speed:40mm/s
Heating nozzle voltage: 12 v
Normal rking temperature: 190°-230°
The maximum temperature does not exceed 280 °
100 k thermocouple
the cooling fan operating voltage 12V
Heating rods: 6mm, 12v 40w
What is in box ?
1 X 0.4mm Nozzle Extruder Print Head 3D Printer Print Head MK8 Latest Upgrade for 3D Printer

Product Features

  • Print Material: ABS 1.75MM, PLA 1.75MM
  • Extrusion nozzle : Standard 0.4mm
  • Nozzle flow rate: about 24cc / h
  • Sports shaft speed:40mm/s
  • Heating nozzle voltage: 12 v

Visit The Website For More Information…

3D Vision Printer, Dual Extruder With 2 FREE PLA Spools, PLA & ABS Filament Compatible, Assembled Desktop Printing

All 3D Vision Printers come with dual extruders. You will also receive 2 FREE 1KG spools to help you with your first build.

The new upgraded extruder is smaller, lighter, and faster to build. And since it’s designed from the ground up for 1.75 mm filament, it’s light-years ahead of past designs in reliability.

The layer alignment results in nicer prints and higher resolution, 100 micron inch.

We’ve completely overhauled the drive system to give the optimum positioning accuracy. The entire system has been upgraded to a sturdy 3/8″ diameter linear shafting. We’ve also switched to self-aligning, sintered stainless steel bearings. These are very forgiving to DIY assembly and provide a nice, smooth motion on the steel shafts. We’ve completely replaced the Z axis with a stepper driven, cantilevered stage. Guided by two of the linear shafts, this completely eliminates any Z wobble and results in nicely aligned layers. Using a high-angle lead screw, we were able to increase the speed of the Z axis from 150mm/minute to 1,000mm/minute. This means the layer changes are almost completely imperceptible.

The new electronics have been designed to make the printing experience easier than ever. The 3D printer connects to your computer via a standard USB cable thanks to a USB chip on the motherboard. We’ve also added full end stop support so that you never need to touch the XYZ axes ever again. When you hit print, the machine will automatically home itself, heat up, and begin printing. All you have to do is sit back and relax while your 3D printer does all the work. Living in the future is awesome. Oh yeah, and the electronics are all inside, so you don’t have wires dangling everywhere.

You may connect using a USB or you can simply print using the supplied 2GB SD card. Sometimes prints fail with USB connection because of PC hibernation or automatically shutdown. This was the reason we developed the SD card reader on the printer. Your 3D print just got faster and simpler.

Product Features

  • USA Seller
  • Dual Extruder – Which means you can print in 2 colors
  • Upgraded Extruder
  • Compatible with both 1.75mm ABS or PLA Filaments
  • 2 FREE spools – 2 spools of 1Kg PLA
  • USB or SD connection
  • Build Print Volume: 225 x 145 x 150 mm | 8.9 x 5.7 x 5.9 in
  • Sturdy acrylic frame
  • Internal LED lighting

Click Here For More Information

3D Print Head Extruder 0.4mm Extruder Single Nozzle Accessories with Terminal Interface Board for 3D Printer

Motion shaft speed: 40 mm / s
Nozzle flow rate: about 24cc / h
There are two different voltages of Heating Nozzle, 12 v and 24 v.
Don’t access the 12 v into 24 v!!!
Operating temperature is 190℃–230℃, Maximum temperature can`t exceed 280℃ or the device might overburning
What`s in box?
1* 3D printer head

Product Features

  • Nozzle: 0.4mm
  • Printed materials: ABS PLAABS PLA
  • K-type thermocouple
  • Material diameter:1.7M
  • with Terminal Interface Board

Detailed Information available on our Homepage…

0.3mm 0.4mm Print Head 0.3mm 0.4mm 3D Printer Extruder Nozzle 0.3mm 0.4mm Nozzle

Nozzle: 0.3mm, 0.4mm
Material: Brass
Made in China
Net weight: 5g (1pcs)
Size: 10*16(mm), M6
0.3mm, 0.4mm apply to the PLA and ABS
What is in box ?
1 x 0.4mm Extruder Nozzle
1 x 0.3mm Extruder Nozzle

Product Features

  • Nozzle: 0.3mm, 0.4mm
  • Made in China
  • Size: 10*16(mm), M6
  • Net weight:5g
  • Material: Brass

Click Here For More Information on 3D Printing