5pcs Aluminium V6 Heat Block For RepRap J-head Extruder HotEnd 3D Printers Parts Heater Hot End Heating Accessories 20x16x11.5 mm Part

Throat and the Nozzle Mounting Holes: M6
Heating Rod Mounting Holes: diameter 6mm
Fixed Screw Holes: M3
Thermocouple Mounting Holes: 3mm
Material: Aluminum
Size(mm): 20*16*115
Package Included:
5 x Aluminum Heater Block

Product Features

  • Accept Nozzle with M6
  • Material: aluminum, size: 20 * 16 * 11.5MM, slotted width 1.3MM; heating hole 6.11MM
  • Suitable for Filament : both 1.75mm and 3.0mm M6 Nozzle
  • Package Included: 5pc Aluminium Heat Block

Visit The Website For More Information…

LEANINGTECH 4Pcs 2 Pin Cooling Fan 40x40x10mm DC 12V for 3D Printer Hotend Extruder, Quiet Brushless 7000RPM

Voltage: 12V
Current: 0.12A
Air volume 7CFM
Speed 7000r / min
Wiring Length: 100cm
Weight 20g

Package Content:
4 x 2 Pin Cooling Fan for 3D Printer

Product Features

  • ☢ UNIVERSAL SIZE: 40*40*10mm, These small fans are widely used in humidifier, aromatherapy and other small appliances series like small heat radiating communication equipment, military equipment, intelligent industrial control equipment plate cooling heat and high precision medical equipment(3D printer) as cooling function.
  • ☢ FAST COOL DOWN: With 2-pin dual ball bearing design, these 3D printer fans is with 7CFM high air flow and fast speed up to 7000RPM, at the same time it is pretty quiet when working.
  • ☢ CONNECTOR TYPE: 2 terminal connectors with 2 pin type, portable small size.
  • ☢ BRUSHLESS COOLING FAN: Rated Voltage: DC 12V, Current: 0.12A. With mounting screws, very easy to install.
  • ☢ WHAT YOU GET: 4 packs of cooling fan for 3D printer.

Detailed Information available on our Homepage…

Creality 3D Printer Parts 5PCS Brass Extruder wheel 40 Teeth Drive Gear for CR-10 CR-10S S4 S5


Item Name:40 Teeth Mk7 / Mk 8 Brass Planetary Gear Wheel
Material: Brass
The number of teeth:40 teeth

Higher stability than metal gear. Also Suitable to other 3D Printers

Package Included:
5PCS Brass Gear Wheel

Product Features

  • Model Number:40 Teeth Mk7 / Mk 8 Brass Planetary Gear Wheel
  • Material:Brass
  • The number of teeth:40 teeth
  • Use For :3D printer
  • Specification:5mm*11mm*11mm

Visit The Website For More Information…

Wangdd22 3D Printer J-head Hotend with Fan for 1.75mm 12v V6 Direct Filament Wade Extruder 0.4mm Nozzle+Volcano kit

Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer.

Notice: Small parts, keep away from children

12V/40W heater,temperature can be up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C)
12V high speed fan with shroud, radiating quickly
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 tube fitting
Volcano heating block
Outer thread : M6 M7
Nozzle throat outer diameter: 6mm
Nozzle throat inner diameter: 4mm
Teflon pipe inner diameter: 2mm
Length of nozzle throat: 22.5mm
Filament diameter : 1.75mm
Extruder brass nozzle input diameter: 1.75mm
Extruder brass nozzle output diameter: 0.3mm 0.4mm 0.5mm
Volcano extruder nozzle output diameter: 0.6mm 0.8mm 1.0mm 1.2mm

Package including:
1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.3mm nozzle print head
1 x 0.4mm nozzle print head
1 x 0.5mm nozzle print head
1 x 0.6mm volcano nozzle print head
1 x 0.8mm volcano nozzle print head
1 x 1.0mm volcano nozzle print head
1 x 1.2mm volcano nozzle print head
1 x volcano heating block
2 x teflon tube within 1.75mm stainless steel nozzle throat

Product Features

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 pcs brass extruder nozzles(1×0.3mm/1×0.4mm/1×0.5mm), 4 pcs brass volcano extruder print head(1×0.6/1×0.8/1×1.0/1×1.2) and a volcano heating block, 2Pcs teflon tube within 1.75mm stainless steel nozzle throat

Visit The Website For More Information…