12864 LCD smart controller for 3D printer.
Supports for RAMPS 1.4 control board.
Built-in encoder allows you adjusting the parameter and selecting file to print.
Large size screen, clear white characters with blue backlit.
Tuning and press the round button to control, with buzzer for reminding, a reset button, easy for operation.
Screen Size: 3in
Item Weight: 139g / 4.9oz
Package Size: 18 * 10 * 3cm / 7.1 * 3.9 * 1.2in
Package Weight: 143g / 5.0oz
1 * 2004 LCD Screen
2 * Cable
- 12864 LCD smart controller for 3D printer.
- Supports for RAMPS 1.4 control board.
- Built-in encoder allows you adjusting the parameter and selecting file to print.
- Large size screen, clear white characters with blue backlit.
- Tuning and press the round button to control, with buzzer for reminding, a reset button, easy for operation.
Click Here If You Need More Detailed Info…
People can make their imagination become reality with LESHP 4nd 3D pen. The 3D printing pen allows anyone to create objects and solve problems with no complicated design software.Good gift for children and audult.
8 different printing speeds let you draw and write effortlessly on a surface or in the air,you can adjust material flow speed to your individual preference while crafting.
Extra-bright LED display allows you to monitor flow speed and temperature of material.
Simple and light design ensure easier to carry, fits every bag or case and children will not feel the weight when use this 3D printer pen.
Recommended temperature for filaments:
Support filaments:1.75mm PLA/ABS
Power input: 100-250v 3A
Power output: DC 12V/3A 24W
1 x 3D Pen
1 x Power Adapter
1 x Pencil Holder
1 x User Manual
3 x Filaments
DO NOT touch the tip or surrounding area in operation or within a short time after stop using.
When not in use,please unload the filament,unlpug power sacket,put the device in the pen holder,if direct contact,the hot tip of nozzle will damage the painted surfaces,plastic,clothes and etc.
The device is suitable for children over 8 years old and adults,children must be accompanied and monitored by adult when using the pen.
DO NOT use the pen near bathtubes,showers,basins or other places wet with water.
- Great Tool: 3D Printing Pen helps children improve spatial thinking ability,and create or build 3D masterpieces,make kids’ world much more colorful. Great tools for teaching and learning.Suitable for kids and adults.
- PLA/ABS Filament Mode: The 4nd 3D drawing pen is suitable for both 1.75mm ABS & PLA Filament.Kit includes 3 pack of PLA/ABS plastic filament.
- 8 Different Printing Speeds: 8 different adjustable feeds let you regulate speed & flow for optimal control of material while you’re drawing with our 3D printing pen.You can choose the most suitable speed.
- Easy to Use: Just insert the filaments to the hole at the top of the pen,and pull the button,the pen will auto absorb the wires.Suits children and adults.
- Lightweight: The 4nd 3D pen is more lightweight than the old generation,simple and light design ensure easier to carry, fits every bag or case and children will not feel the weight when use this 3D printer pen.
Detailed Information available on our Homepage…
Material: Durable aircraft-grade aluminum
Size: 7.1*0.71*0.71 inch (180*18*18mm)
Voltage: DC 5V 2A
Nozzle Diameter: 0.6mm
Printing Temperature: 180-220℃ adjustable
Printing Speed: Low, Mideum, High speed
Printing Model: PLA 1.75mm
Cable length: 1.5m
Package Size: 18.8*15.5*6cm
Package Weight: about 400g
Package included: 1* 3D pen, 1*USB cable, 1* power adapter, 1* 24.6ft（7.5M） random color PLA filament, 1* pen holder
1.Connect the 3d pen to power supply(5V/2A),It enters into standby condition when the LED screen lights. 2If you need to switch to the ABS filament mode please press the “√” button for 3 seconds.The LED screen displays MATEL:ABS mode. 3.Press the “«” button once and load filament refills into the pen. (Please gently push the another end of the filament until it goes through the gear.)Double click the “«” button to start loading automatically. (Make sure that both end of the filament is smooth) 4.Press the “»” button once to start unloading automatically,when the unloading progress is about to finish please pull the filament gently out of the pen.(The unloading progress must be finished in one time.
1. Applicable age: 5 years old and above.
2. Pay attention to the temperature of the nozzle, please do not touch the nozzle during using.
3. Please do not use the nib to touch other hard objects.
4. Please do not use foreign materials to load the hole of filament or the nib.
5. Please do not use other manufacturers’ consumables, so as not to cause incompatibility.
6. This product is not waterproof.
7. Make sure that the filament is completely out of the pen and cut off the power supply after using.
8. Please put the pen in a place where children can not touch after using.
- 【Normal Temperature 3D pen】 compatible with Both ABS & PLA Filament – The Aircraft-grade aluminum 3D drawing pen is suitable for both 1.75mm ABS & PLA Filament. PLA Filament is non-toxic and odorless,safer than ABS, and tend to be widely-used filaments.Please do not use with PCL filament.
- 【Free and Safer PLA Filament Included】 This 3D Printing Pen comes with free one 7.5 meters PLA filament s for Kids，doodling art craft making，adults，artists，teens ,Girls.Save 10% on extra PLA filament [ASIN:B01MYA09QM] upon purchase this 3D pen,enter code 3WY78DAL at checkout.
- 【Adjustable Temperature and Speed】enables you control the temperature and speed when you enjoy drawing in 3D model.Please make sure that the electricity of the power bank is no less than 40% when you connect it to the 3D pen.
- 【Package Content】 1*3D printing pen 2. 1*Power adapter（5V/2A） 3.1*USB cable 4.1*Manual 5. 1*24.6ft(7.5m) length PLA filament 6.1*pen holder The heater nozzle of the 3d printing pen can be replaced. Asin:B0722K6Y6B
- 【Warranty from the purchase date】30 days return [replace] a purchase,1 year Warranty and whole-life customer service， please contact us if you have any problem with this 3D pen
Check Out Our Website For Details…
The INSTONE Mini 3D Printer boasts a 4.3x 4.3 x 4.9 inch, auto-leveling print bed, and an auto-calibrating extruder module which ensures the user gets the best possible prints.
Software: iNSTONE 3D, Cura, Simplify 3D, etc.
Build volume: 4.3 x 4.3 x 4.9 inch
Package size: 9.85 x 9.85 x 14 inch
Mini 3D Printer *1
Bottom Plate *1
Power Supply *1
Date Line *1
TF Card *1
Card Reader *1
Glue Stick *1
1 year for printer; 6 months for motor
Note: Do not touch the nozzle when using! Hot!
- Auto leveling–easy and accurate
- Easy operation–One knob switch helps to do everything!
- Anti-collision design–Keep safe for children.
- Cute and portable–Print your 3D world everywhere!
- Quick print–Maximum speed to 80mm/second
Click Here For More Information