Kweiny Heat Insulation Cotton and PTFE High Temp Tape for 3D Printer Makerbot Hotend Heater Block | 10PCS Cotton and A Roll of Tape for Extruder Parts Tool Kit

Notice:
1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts;
2. Please do not use flame to test their heat resistance, because the flame’s temperature is much higher than 300 degrees Celsius (572 Fahrenheit ).

Size:
Heat insulation cotton: Length 80mm/3.15in, width 20mm/0.78in, thickness 2mm;
PTFE high temp tape: Total length 10m/32.8ft, width 8mm, thickness 0.13mm

package including:
10PCS heat insulation cotton;
One Roll of PTFE High Temp Tape

Product Features

  • Compatibility: Matches all 3D print extruder heater block offered from E3D Makerbot, MK8 Makerbot RepRap , etc.
  • High temperature resistance: Both PTFE tape and heat insulation cotton, short term resistance to temperature 260 degrees Celsius (500 Fahrenheit ), long term resistance to temperature 300 degrees Celsius (572 Fahrenheit )
  • Function: Keep heater block temperature constant, so that improving the quality of the printed matter, save electricity and prolong the service life of heater and temp sensor
  • Use-method: You can cut cotton into the right size and hole according to your needs, then stick it firmly with PTFE tape. 5 sides of heater can be wrapped up in cotton, except the surface installed heater wire, but you just need to use 1 piece cotton. You can also use PTFE tape to stick any other parts on your 3D printer
  • Material: The heating insulation cotton is made from heat resistant ceramic fiber, the tape is made from PTFE

Visit The Website For More Information…

3D Printer Accessories Kit – 3D Printer Parts Include 5pcs Brass Extruder Nozzle, 5PCS Drill Bits, 5pcs 30mm Extruder M6 Tube, 5pcs Aluminum Heater Block, 5pcs Heating Block Cotton, 1pcs Removal Tool

Specification of Brass Nozzle:
Type : 0.4mm Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm

Specification of drill kit:
Type :Drill kit
Material: silicone
Bit diameter: 0.4mm
The bit length: 8mm
The length of shank: 20mm

Specification of Extruder Tube:
Type : Nozzle Throat
Compatibility : 3D Printer
Outer Thread : M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 30mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of aluminum heater block:
-Material: Aluminum
-Dimensions: 20*20*10mm(LWH)
-Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
-Heater Mounting Hole: 6mm diameter
-Thermocouple Mounting Holes:3mm diameter
-Suitable for Makerbot printer

Specification of heating block cotton:
Material: cotton
Note: this product only suitable for 3D printer using indoors
WAHHING Heater Block Cotton Safe working temperature: <300°C
This Heater Block Cotton in normal working, may be appear some slight smoke, and the color will turn into dark brown and black is normal, it will not burn! please feel relieved to use!

Attention: Small parts, keep away from children

Package include:
5 x 0.4MM Brass Extruder Nozzle Print Heads
5 x 0.4mm Drill Bits Nozzle Cleaning Kit
5 x 30mm Extruder M6 Tube
5 x Aluminum Heater Block
5 x Heating Block Cotton
1 x Removal Tool

Product Features

  • Package includes: 5x 0.4MM brass extruder nozzle print heads, 5x 0.4mm drill bits nozzle cleaning kit, 5x 3D printer nozzle throat, 5x aluminum heater block, 5x heating block cotton, 1x removal tool (for MK8 Makerbot Reprap Prusa I3 3D Printer)
  • Extruder Brass Nozzle Print Head: Material – High quality copper (brass); Size – 5*13mm; Output Diameter – 0.4mm; Input Diameter – 1.75mm; golden color, for MK8 Makerbot Reprap 3D Printers
  • Cleaning Drill Bits: Made of high carbon steel and treated with nickle-iron alloy. Diameter – 0.4mm; Length – 8mm; The length of shank – 20mm
  • Nozzle Throat: Material – Stainless Steel; Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm
  • Compatibility with all 1.75mm PLA ABS 3D printer, works with Anet A8

Detailed Information available on our Homepage…

Heating Block Cotton 10PCS Kapton Adhesive Gold Tape 0.78in x 108ft for Ultimaker Makerbot 3D Printer-Hotend Nozzle Heat Insulation Cotton & High Temperature Resistant High Temp Tape

Warm Instructions:
►Please keep away from children.
►Please read your 3D printer user manual carefully before installing and using it.
►Please shut off power to the circuit before starting installation work.
►Please don’t use it in others,this product is designed for 3D printer only.
►Please be safe! The temperature of 3D printer accessories could be very high.
PLA (190°C-230°C) ABS (230°C-250°C) Heater Block Cotton(<300°C)

Feature:
– Color: Yellow.
– Material: Ceramic fiber.
– Size:Heating Block Cottons 2.75 x 0.78 x 0.07in(+-0.07in)[70 x 20 x 2mm(+-2mm)]
High Temp Tape (0.78in x 108ft)

Package Included:
10pcs*Heating Block Cottons
1pc*Kapton Adhesive Gold Tape

Product Features

  • ★ 100% SATISFACTION GUARANTEE: Refund your money in 30 days
  • ★ The heat insulation cotton is manufactured with top-class heat-resistant ceramic fiber material for durable and practical use.
  • ★ This Heater Block Cotton in normal working, may be appear some slight smoke, and the color will turn into dark brown and black is normal, it will not burn! please feel relieved to use!
  • ★ Must pay attention to the Safe working temperature of the 3D printer’s consumable and accessories, May cause high temperature hazards!! PLA (190°C-230°C) ABS (230°C-250°C) Heater Block Cotton(<300°C)
  • ★ This heat insulation cotton is used for 3D printer nozzle keeping warm, it can be customized according to customer needs, the advantage for keeping the key parts of the 3D printer – heating aluminum block warm, is making the internal temperature flat, saving power,and energy.

Visit The Website For More Information…

Ivelink 3mm Heating Block Cotton and Kapton Tape Adhesive Gold Tape Heat High Temperature Resistant for 3D Printer (11Pcs, 12mm 33mm)

Specification of Heating block cotton
Material: cotton
Size: 62mm*20*2mm +/-0.2mm

Specification of Kapton
Material: durable polyimide and silicone
Size:12mm*33m
Temperature resistance:-50℃ to 280℃

Safety Guide

Keep away from small children
This Heater Block Cotton in normal working, may be appear some slight smoke, and the color will turn into dark brown and black is normal, it will not burn! please feel relieved to use
Must pay attention to the Safe working temperature of the 3D printer’s consumable and accessories, May cause high temperature hazards
PLA (190°C-230°C)
ABS (230°C-250°C)

Package
10*heating block cottons
1*Heat Resistant adhesive tape

Product Features

  • Heating block cotton is made from heat-resistant ceramic fiber
  • Polyimide Tape is thin and conformable enabling masking of uneven surface
  • Heating cotton work as high as 900 degree,Tape is high of 250 degree
  • High performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties
  • This heat insulation cotton is used for 3D printer nozzle keeping warm

Detailed Information available on our Homepage…