This item is a 3D printer cooling blowing fan, which is made of high quality PBT. It is excellent for cooling heatsinks on hot ends, prints, or other cooling needs, bearing is high precision, long life and low noise.
– Brand: UEETEK. – Color: Black. – Pitch: 54.26mm. – Power: 1.8W. – Type: blowers, humidifiers. – Bearings: Oil-bearing. – Wind: 5.9CFM. – Operation Voltage: DC 12V. – Current Rating: 0.15A. – Revolution: 2200 ± 10% R.P.M. – Wind Speed: 2.8M / S. – Noise: 18dBA. – Excellent for cooling heatsinks on hot ends, prints, or other cooling needs. – Bearing is high precision, long life and low noise. – Service life: the working environment temperature of 40℃ (30000 hours).
Package Including 3 * UEETEK DC 12V 3D Printer Blowing Fan for Cooling Heatsinks (Black)
Cooling Blower Fan 12vdc 0.23A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series; small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; pc cpu server cooling dissipation and so on—Repair Replacement (2Pack)
Type: Centrifugal Blower Size : 50 * 50 * 15 Bearings: Oil Voltage : 12V Current : 0.23A Scope: humidifiers , heaters, clothes dryers , etc. Quantity:2Pc
DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for 3D Printer
Power Connection: 2-Pin
Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H); Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″; Mounting Spacing : 5.8cm/2.3″;Weight : 26g
Bearing Type: Dual Ball Bearing, Speed: 6000 RPM, Air Flow : 3.87 CFM; Connector: 2 Terminal Connector with 2pin-ph2.5;
V6 Extruder: ●With PTFE in hot regions of our HotEnd we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C. ●This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating. ●Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease. Specification: Type: Bowden J-head Dual V6 Hotend Included: NTC3950 thermistors and 12V 40W heater NTC 3950 Thermistor parameters: High accuracy: 1% Resistance value at 25°C=100K Wiring insulation: high temperature teflon/PTFE Wiring length: 1 meter
Fisheye Effector: Material: Aluminium Alloy Scrwe size: M4 This effector fits V6 J-head hotend (bowden and wade),it can hold two J-head together. Don’t compatible with chimera multi-extrusion hotend and V5 version J-head hotend.
Package includes: 2x long distance V6 J-head extruder with 0.4mm nozzle ,12V heater 2x 12v cooling system 1x dual head M4 effector
RepRap 3D printer extruder hotend compatible with E3D V6 1.75mm / 0.4mm
12V 40W heater, 12V high speed fan with shroud, NTC 3950 pre-wired thermistor
Metal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials
Easy No-Solder, No-Tape, No-Adhesive assembly and maintenance.
This 3D Printer Dual V6 Hotend is applied for 1.75mm Filament Long-Distance Filament Bowden extruder