New Matter MOD-t 3D Printer Entry Bundle – Includes 3 Spools of Filament and a 3-Pack of Print Surface Plates

The New Matter MOD-t is the most elegantly simple desktop 3D printer, providing the highest quality and reliability for use at home and in the classroom. With levels of quiet operation, safety, and customer support that are unmatched by any other desktop 3D printer, the MOD-t is the perfect fit for consumers, professionals, and students alike.

Product Features

  • Elegantly Simple – Easy setup allows you to begin 3D printing within 20 minutes
  • WiFi Enabled – Print wirelessly from your computer, tablet, or smartphone
  • High Quality Reliability – Expect a higher print success rate and resolutions as fine as 50 microns
  • Eco-Friendly PLA – Print with high quality, eco-friendly PLA filament in an array of vibrant colors
  • Unlimited Support – Experience unlimited phone, email, and chat support for the life of your MOD-t

Click Here For More Information

What's Hot Today!

MyStemKits 2-year Subscription Plus Three 3D Printers for Small Enterprise – Cloud access to over 150 3D-printable kits & lessons. Unlimited Printing Bundle

The MyStemKits library has over 150 Science, Technology, Engineering and Math (STEM) kits with model assembly guides that are ready-to-stream to most 3D printers. Need a printer? No worries – this 2-year subscription includes three Dremel 3D40 Printers as shown in the product slides (incl. 3 build sheets and 1 filament spool) . Many kits have accompanying lessons designed in partnership with the Florida Center for Research in STEM based out of Florida State University. These vetted lessons are aligned with K-12 NGSS, Common Core and a growing group of state standards. Some of the most popular kits are the DNA kit, Golden Ratio kit, Touch Numbers kit, Catapult kit, Brain Anatomy kit and Ramp kit. Check the images and videos for a sampling of kits, model guides, and lessons. Enterprise subscriptions are unlimited printing plans, based on number of students, with no point counting or limits per month. This plan is designed for up to 500 students. Additionally, digital curriculum attachments are viewable before printing. Upon purchase, you will receive access credentials to the portal, including the ability to set up 8 educator accounts (1 per 30 students). From the MyStemKits Print Portal, you can browse available kits by either subject or grade and pick the kits that you want to review, print and build. We don’t decide what kits to send you each month – you decide which kits, when and how many, you will print. From the portal, the MyStemKits Printer Management Platform makes your experience intuitive and easy. The platform is mobile ready, and allows you to control multiple 3D printers and users from a single dashboard. Prints are preconfigured with print-specific attributes.

Product Features

  • Over 150 kits that stream directly to your 3D printer – no design skills or downloading required with this cloud-only accessible subscription.
  • 3 Dremel 3D40 Printers and Unlimited Printing! You choose the kits – Print what, when, and how many you want. Replace missing or broken parts too.
  • Perfect for educators who need classroom manipulatives and standards-driven lessons for their K-12 class rooms but do not have a printer
  • This two-year, Basic Enterprise Bundle is designed for small enterprises up to 250 students and is ideal for your media center, STEM lab, summer camp, after school program, or group of up to 8 teachers.
  • With digital curriculum attachments available to review before print, this plan is a great curriculum planning tool.

Visit The Website For More Information…

What's Hot Today!

MyStemKits 2-year Subscription Plus Five 3D Printers for Mid-Size Enterprise – Cloud access to over 150 3D-printable STEM kits & lessons. Bundle with Unlimited Printing!

The MyStemKits library has over 150 Science, Technology, Engineering and Math (STEM) kits with model assembly guides that are ready-to-stream to most 3D printers. Need a printer? No worries – this 2-year subscription includes 5 Dremel 3D40 Printers as shown in the product slides (incl. 3 build sheets and 1 filament spool) . Many kits have accompanying lessons designed in partnership with the Florida Center for Research in STEM based out of Florida State University. These vetted lessons are aligned with K-12 NGSS, Common Core and a growing group of state standards. Some of the most popular kits are the Hominid Skull kit, Ones Tens Hundreds kit, Pizza Fractions kit and Ocean Topography kit. Check the images and videos for a sampling of kits, model guides, and lessons. Enterprise subscriptions are unlimited printing plans, based on number of students, with no point counting or limits per month. Additionally, digital curriculum attachments are viewable before printing. Upon purchase, you will receive access credentials to the portal, including the ability to set up 17 educator accounts (1 per 30 students). This plan is designed for 500 students. From the MyStemKits Print Portal, you can browse available kits by either subject or grade and pick the kits that you want to review, print and build. We don’t decide what kits to send you each month – you decide which kits, when and how many, you will print. Replace broken parts too. From the portal, the MyStemKits Printer Management Platform makes your experience intuitive and easy. The platform is mobile ready, and allows you to control multiple 3D printers and users from a single dashboard. Prints are preconfigured with print-specific attributes.

Product Features

  • Over 150 kits that stream directly to your 3D printer – no design skills or downloading required with this cloud-only accessible subscription.
  • 5 Dremel 3D40 Printers and Unlimited Printing! You choose the kits – Print what, when, and how many you want. Manage multiple printers and users from single dashboard.
  • Perfect for educators who need classroom manipulatives and standards-driven lessons for their K-12 class rooms but do not have a printer
  • This two-year, Mid Enterprise Bundle is designed for mid-size enterprises up to 500 students and is ideal for your media center, STEM lab, summer camp, after school program, or group of up to 17 teachers.
  • With digital curriculum attachments available to review before print, this plan is a great curriculum planning tool.

Click Here If You Need More Detailed Info…

What's Hot Today!

3D Printing Surface Bundle – Borosilicate Glass and Adhesive Printing Surface with 4 Clips – Starter Kit for 3D Printers

Just getting started with 3D printing? Can’t decide between using a glass plate or adhesive surface? Why chose when you can have both!

Borosilicate glass provides a stable print base for even low diameter printouts, and due to its extreme heat resistance is perfect for heated beds when printing tricky filaments!

Our adhesive surface provides extreme grip, and is great for warp free printing with ABS, PLA, PETG, HIPS, PET+, brick, and flexible (TPE) filaments!

Both surfaces are premium quality, durable printing bases and will transform your 3D printing experience.

Specifications
Adhesive Print Surface
Size: 8″ x 8″
Maximum Temperature: 200℃/392°F
Glass Plate
Size: 7.8″ x 8.3″ x 0.1″
Maximum Temperature: 550℃/1022°F

Product Features

  • PRINT WITH STABILITY – Just getting started with 3D printing? This set of clips, glass plate and 3D printing surface will let you test the most popular printing surfaces and find the right one for you!1
  • PERFECT FOR ALL FILAMENTS AND PRINT QUALITIES – Suitable for all types of filament glass can be used for your ultra fine quality printouts whereas our adhesive surface will provide extreme grip for all types of filament!
  • SIMPLE TO INSTALL – Just clean your print bed and peel off the backing, the adhesive surface sticks fast. Then use the provided clips to keep your glass plate in place on top!
  • EXTREME HEAT RESISTANCE – Great for heated print beds, our glass sheets have an ultra-high resilience to rapid heating and cooling. So won’t crack like standard soda lime glass under intense direct heat.
  • NO PREP PRINTING – Say goodbye to tape, hairspray and glue sticks, once installed and calibrated, you can print almost any filament onto your new adhesive surface without worrying about it coming unstuck.

Check Out Our Website For Details…

What's Hot Today!