3D printer tool kit include 6 pieces 0.4 mm brass extruder nozzle print head, 6 pieces 30 mm length extruder 1.75 mm tube, 3 pieces 0.4 mm cleaning drill bits with 2 pieces hex drivers for MK8 3D printers
3D printer tool set: Anti-leakage and anti-blocking design, outer thread, you can install directly, compatible with most 1.75 mm PLA ABS 3D printer.
Specifications: Nozzle print head: Type: 0.4 mm extruder brass nozzle print head Color: golden Material: brass Oversize: 8 x 13 mm Input diameter: 1.75 mm Output diameter: 0.4 mm
Nozzle inputting tube: Type: nozzle throat Compatibility: 3D printer Outer thread: M6 Nozzle throat outer diameter: 6 mm Nozzle throat inner diameter: 4 mm Pipe inner diameter: 2 mm Length: 30 mm Filament diameter: 1.75 mm Material: stainless steel
Cleaning drill bits: Type: drill bit Bit diameter: 0.4 mm Bit length: 7 mm Shank length: 31 mm
Package include: 6 x 0.4 mm brass extruder nozzle print heads 6 x 30 mm length extruder 1.75 mm tube 3 x 0.4 mm cleaning drill bits 2 x Hex drivers
Attention: 1. Don’t use the drill to clean until the nozzle is heated to above 200 degrees. 2. Small parts, keep away from children.
Package include: 6 pieces 0.4 mm brass extruder nozzle print heads, 6 pieces 30 mm length extruder 1.75 mm tube, 3 pieces 0.4 mm extruder nozzle drill and 2 pieces hex drivers
Nozzle print head: made of brass material; Oversize: 8 x 13 mm; Input diameter: 1.75 mm; Output diameter: 0.4 mm
Nozzle inputting tube: made of stainless steel; inner diameter: 2 mm; Length: 30 mm; Outer thread: M6; Filament diameter: 1.75 mm
Cleaning drill bits: bit diameter: 0.4 mm; Bit length: 7 mm, the length of shank: 31 mm; Comes with a plastic box, convenient to store
Good compatibility: these 3D printer tool kit is compatible with most 1.75 mm PLA ABS 3D printer
Notice: 1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts; 2. Don’t use the needle to clean until the nozzle is heated to above 200℃(392℉); 3. Sharp parts, please keep away from children.
Compatibility: Upgrade for MK10 hot end extruders. Fit with M7 thread aluminum heater block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc.
Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used as MK10 nozzle.
All metal advantage: All metal hotend allows you to raise the printing temperature. It make the melt plastic more smooth, So as to improve the quality of the printing parts.
Quantity and specification: MakerBot 0.4mm nozzle 1 piece. M7 thread throat kit 1 piece. Nozzle cleaning drill bit 2 pieces(0.35mm,0.4mm). For detailed dimensions, please refer to the drawings in the upper left.
Cleaning skill: The best way to clean up the nozzle is to use the 0.35mm drill bit first, and then use the 0.4mm drill bit. You can twist the needle to make it easier to clean up.