WINSINN 3D Printer Optimized Extruder Hotend Kit Driver Feeder For 1.75mm 3mm Nozzle Filament – RepRap Prusa i3 Bowden E3D J-Head V6 Makerbot MK8 MK10 Kossel Delta Universal Upgrade Accessories Parts


►This is a Optimized version of 3D Printer Extruder. It is very light and compact. It can use a lighter motor, any Bowden-type 3D printer can become a powerful, reliable little beast. It is easy to manually squeeze, remove, load and unload Filament.
At the same time, You only need a hex wrench, you will be able to within a minute to remove the Titan, regardless of the opening and assembly are very easy and fast.

—————————————————————————————————————

►Installation Points: The top surfaces of the two gear s must be flush adjust the pinion accordingly

►We have done thousands times of tests, including strength testing, time testing and so on. It really works well. Let’s try it:))

—————————————————————————————————————

Package include:
►1 x WINSINN Extruder Full kit (All Accessories show as Picture 2)
►Note: This Kit NOT Included Motor, V6 Hotend, Titan Aero

►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))

Product Features

  • Compatible with E3D-V6 Hotend and Titan Aero Upgrade Kit
  • High quality Titan extruder, Very easy to upgrade your printer
  • Filament:1.75mm 3mm PLA / ABS / Flexible / other
  • Suitable For Remote and Short distance
  • Note: This Kit NOT Included Motor, V6 Hotend, Titan Aero

Visit The Website For More Information…

What's Hot Today!

[Sintron] 1.75mm 3D Printer Drucker Kossel Mini All Metal MK8 Extruder hotend 0.4mm Nozzle for Bowden RepRap Rostock Delta Kossel Mini Prusa i3 (Kossel-Extruder)

Overview

This MK8 extruder is an open source universal suitable for most RepRap and DIY long distance feeding filament 3D Printers.

We have made the NEMA 17 Stepper motor with 4 wires which is specially designed for 3D Printer Controller RAMPS 1.4, so you just need to plug it in, and there you go! no need to buy from others and waste a lot of time trying to figure out how to connect them.

The extruder is almost the most important part for 3D printer, also the most difficult part to calibrate. we have made all metal design to replace plastic parts bowden extruder.

Features

(1) Compatible with ABS and PLA 1.75mm.
(2) NEMA 17 Stepper motor is included in this transaction.

Tips:

While using with PLA filament, please always remember to keep the fan on, otherwise it might get jammed and ruin the hotend. PLA is more easier to get jammed, so it might require some patience to practice.
For ABS, we would also suggest to keep the fan on, as this is also better. also remember to purchase filament from good reputation seller, as the filament is very important!

Specifications
(1) Nozzle : 0.4mm
(2) Voltage : 12V/24V
(3) Motor Model : SL42STH40-1204A
(4) Nozzle Flow Rate : 24cc / h
(5) Thermistor Tpye : NTC 100K 3950
(6) Sports Shaft Speed : 10-100mm

Motor Parameters

(1) Model:SL42STH40-1204A
(2) Step Angle : 1.8°
(3) Rated Voltage : 2.55 V
(4) Rated Current : 1.7 A
(5) Phase Resistance : 1.5Ω
(6) Phase Resistance : 2.3 mH
(7) Number of Lead Wire : 10-100mm

Product Features

  • (1) Compatible with ABS and PLA 1.75mm.
  • (2) NEMA 17 Stepper motor is included in this transaction.
  • (3) We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !

Visit The Website For More Information…

What's Hot Today!

KINGPRINT 3D Printer Fitting 3D V6 Bowden J-Head Pneumatic Straight Connectors 1.75mm PTFE Tube quick Coupler(Pack of 5pcs)

Model: PC4-01
Screw threaded: M10
OD: 4MM
Material: Aluminum
Application: For 3D printer part

Package Included:

5*Pneumatic Connectors

Product Features

  • Type: 3d printer coupler Filament
  • Diameter: 1.75mm
  • Length: 21.27mm
  • Net weight: 14g
  • Inside diameter: 6mm

Visit The Website For More Information…

What's Hot Today!

Ivelink PC4-M6 Fitting Pneumatic Straight Push to Connect+ 2.0M Bowden Tube PTFE Teflon for Reprap 3D Printer

Package Including
10 x PC4-M6 Male Straight Pneumatic Connector
1pcs 2.0m PTFE Teflon Bowden Tube

Product Features

  • PTFE Bowden Tubing Diameter: 4mm
  • Thread Diameter : 6mm
  • PC-M6 Material: Copper,White Teflon material, 2.0 Meter length
  • Density: 2.15-2.20g/cm3,Withstands temperatures up to 260C
  • 2mm ID/ 4mm OD Bowden Tube for 3D Printers

Detailed Information available on our Homepage…

What's Hot Today!