RepRap Champion Borosilicate Glass (Boroglass) for Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers, 4mm Thick

100% borosilicate glass, flat, heat resistant plate, does not warp during long term use. 4mm thick – will not break when you remove your print from it.

Plate fully matches 220x220mm heated bed on many popular 3D printers. This plate is larger and thicker than typical 3mm plates sold for use with MK2 heated beds.

Borosilicate glass material has excellent thermal and chemical properties compared to soda lime glass. Resists cracking due to direct high heat, perfect for a 3D printer bed. It is used on top of your heated print bed and provides excellent results. Please make sure your 3D printer will accept this size before making purchase.

Please take a look at the supplied drawing for dimensions and details.

Glass plate features:

Dimensions: 219x219mm, 4mm thick.
100% borosilicate heat resistant glass (it has yellow tint as opposed to soda lame glass green tint).
Cut corners to clear with mounting screws.
Very flat and does not warp during use.
Can be used as 3D printer print surface, with or without heater board.

Package Contents:

1 x Borosilicate Glass Print Surface 219x219mm x 4mm thick.

Product Features

  • Thicker 4mm boro glass plate will not warp or bend, perfectly flat
  • 100% Borosilicate glass content
  • Plate perfectly matches larger aluminum plates 220x220mm on Wanhao Duplicator i3, MP Maker Select, Anet A8

Click Here For More Information

What's Hot Today!

8.385”x7.875”x0.22” (213mm X 200mm X 6mm) Borosilicate Heated Bed Glass Plate Works W/ RepRap, MK2, MK2A, Mendel 3D Printers

We offer thick Ultra flat, Ultra durable, borosilicate glass that is ideal for 3d printing, it allows for excellent adhesion of your projects allowing for great prints with excellent surface finishes. Our glass has excellent thermal conductivity keeping the build surface temperature uniform, ensuring the best adhesion possible that is equal across your print. This is ideal for use with ABS or PLA materials, as well as many exotics such as carbon fiber or TPU, just apply AquaNetTM hairspray by lightly spraying the sheet with 2 or more coats and your prints will be stuck to the glass. Either clamp the glass to your build platform or build a glass holder and you will be ready to start printing with your new Glass Plate!

Product Features

  • 3D Printer Glass Heating Bed
  • Works with ReRap, MK2, MK2A, Mendel
  • Borosilicate Glass Print Surface 213 x 200 mm x 6mm thick
  • Edges sanded
  • Rigid 6mm thickness Very flat will not warp

Detailed Information available on our Homepage…

What's Hot Today!

Quicka Clear Borosilicate Glass for 3d Printers, Round 200mm, 3mm Thick, Boro Glass


Can handle continuous use at 350 degrees F
Extremely durable
Low coefficient of thermal expansion
Perfectly flat surface, perfect for printing
Ground edges (No cut fingers)

Product Features

  • Can handle continuous use at 350 degrees F
  • Extremely durable Ground edges (No cut fingers)
  • Low coefficient of thermal expansion
  • Perfectly flat surface, perfect for printing

Detailed Information available on our Homepage…

What's Hot Today!

MK2B Heated Bed, NTC 3950 Thermistor & Borosilicate Glass Combo

Complete set: 214mm x 214mm MK2B with soldered thermistor, soldered power cord and 214mm x 200mm borosilicate glass plate.

Product Features

  • MK2B: 214mm x 214 mm (8.4 in x 8.4 in) 12V or 24V Heated Bed for MakerBot RepRap UP Mendel I3 Printer
  • Thermistor included: 100K ohm NTC 3950, soldered and installed
  • Borodilicate Glass: 3mm thick, 214mm x 200mm, will not interfere with MK2B mounting screws
  • Soldered power leads
  • Red soldermask and white silkscreen on both sides

Visit The Website For More Information…

What's Hot Today!