►This is The Chimera Extruder Full kit, replacement parts is very easy, so you can easily upgrade your printer. High Speed Volcano Upgrade + High-quality stainless steel nozzle + all-copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))
►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.
►This is the Sharp Volcano Nozzle for upgrade version. Nozzle Ensure Concentricity and Roundness.
►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm
►2 x High quality copper + stainless steel 1.75mm-0.4mm V6 nozzle ►2 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle ►2 x High quality Standard V6 + Volcano +Copper heater block ►2x TC4 titanium alloy + PTFE Teflon Heat Break ►1 x Aluminum alloy Heat sink + PC4-01 Pneumatic fittings ►2 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor ►1 x High Speed 3010 Fan 12V 0.1A 9000±RPM ►2 x Allen wrenc
Can extrude 2 different filaments at the same time!
TC4 Titanium alloy Heat Break – Ultra-low thermal conductivity, Make sure the printer stable operation.
3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
Specification of Heating block cotton Material: cotton Size: 62mm*20*2mm +/-0.2mm
Specification of Kapton Material: durable polyimide and silicone Size:12mm*33m Temperature resistance:-50℃ to 280℃
Keep away from small children This Heater Block Cotton in normal working, may be appear some slight smoke, and the color will turn into dark brown and black is normal, it will not burn! please feel relieved to use Must pay attention to the Safe working temperature of the 3D printer’s consumable and accessories, May cause high temperature hazards PLA (190°C-230°C) ABS (230°C-250°C)
WARNING!! 1.3D printer replacement parts, Always shut off power to the circuit before starting installation work. 2.The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury. 3.3D printer initial operation, Do not run the equipment Unattended state. 4.When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state. 5.To ensure the users will use the product safely and properly, Please read your 3D printer manual first and follow the instructions step by step before using the product. 6.Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.
Heat preservation, keep the printer heating evenly and work better
You can Punch Holes or Cut fit size to the cotton.
Recommend Safe Working Temperature : ＜300°C
Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M
Package including:15PCS x 2mm heating block cotton + 1PCS x 6mm Kapton Tape