BALITENSEN 6pcs of K800 Upgrade Diagonal Carbon Push Rods Arm Kit 217mm Length 4x6mm Parallel Arm Fisheye Rods for Delta Mini Kossel 3D Printer Part

Specification:
Lenght of carbon Rod: 180MM
Total Length: 217mm
Outer Diameter: 6MM
Inner Diameter: 4MM

Package:
6* Carbon Rod With Fisheyes

Product Features

  • The whole set has six parallel manipulator.
  • 217MM Length, 4*6mm Parallel Arm Fisheye Carbon Rod Kit Set.
  • K800 upgrade Diagonal Push Rods Kit – 3D Printer Delta Kossel.
  • M3 screw is used in knuckle bearing.
  • High Accuracy.

Visit The Website For More Information…

What's Hot Today!

HICTOP LM8UU Linear Ball Bearings for 3D Printer Prusa I3 DIY Kit Pack of 6pcs (8mm x 15mm x 24mm)


12 lm8uu linear bearings
8Mm inside diameter, 15 mm outside diameter, 24 mm length
Bearings may require lubrication and break in period
Great for linear motion on 3D printer, cnc, and other applications

Product Features

  • Closed type ball bushing for use in linear motion applications where shaft support clearance is not a factor.
  • Synthetic resin retainer plate for accurate ball guidance and low noise.
  • High-carbon chromium steel bushing case for strength and rigidity.
  • Integral lip seals to retain lubricant and protect against contamination.
  • Package included: 6 x LM8UU Linear Bearings

Visit The Website For More Information…

What's Hot Today!

EAONE 6pcs 30MM Length Extruder 1.75MM Tube and 6pcs 0.4MM Brass Extruder Nozzle Print Heads for MK8 Makerbot Reprap 3D Printers (Bonus: 2pcs cleaning drill Bits)


EAONE 6pcs 30MM Length Extruder 1.75MM Tube and 6pcs 0.4MM Brass Extruder Nozzle Print Heads for MK8 Makerbot Reprap 3D Printers(Bonus: 2pcs cleaning drill kits)

Specification of Extruder Tube:

Type : Nozzle Throat
Compatibility : 3D Printer
Outer Thread : M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 30mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Brass Nozzle:

Type :0.4mm Extruder Brass Nozzle Print Head
Color: Golden.
Material: brass
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm

Specification of drill kit:

Type :Drill kit
Material: silicone
Bit diameter: 0.4mm
The bit length: 8mm
The length of shank: 20mm

Note: Compatible with all 1.75mm PLA ABS printer, works with Anet A8

Attention: Small parts, keep away from children

Package include
6 x 3D Printer Nozzle Inputting Tube
6 x 3D Printer Extruder Brass Nozzle Print Head
2 x Drill Bits(Color:Random)

Product Features

  • 6x 3D Printer Nozzle Throat + 6x Nozzle Print Heads + 2x Cleaning Drill Bits (for MK8 Makerbot Reprap Prusa I3 3D Printer)
  • Nozzle Throat: Material – Stainless Steel; Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm
  • Extruder Brass Nozzle Print Head: Material – copper (brass); Size – 5*13mm; Output Diameter – 0.4mm; Input Diameter – 1.75mm; Color – Golden
  • Cleaning drill Bits: Diameter – 0.4mm; Length – 8mm; The length of shank – 20mm
  • Compatibility with all 1.75mm PLA ABS 3D printer, works with Anet A8

Visit The Website For More Information…

What's Hot Today!

Kuman 6pcs Endstop Mechanical Limit Switches for 3D printer RAMPS 1.4 with Independent Packaging KB01

Connection description:
Red line connect VCC (ramps of +)
black wire connect the GND (ramps of -)
Green Line connect SIGNAL (ramps in s)
Tips: Under normal circumstances, the system must be configured to atleast three mechanical switches.
Advantage: Easy to install, the more common used styles
Length of Cable: 70 cm

Package include:
6 x Mechanical Switch Endstop
6 x 3Pin 70cm Cable

Product Features

  • High quality switching element
  • Customized high quality connection, using 22AWG wire, the copper wire inside is thick which can withstand 2A current, 300V voltage
  • Wide insulation temperature range: The insulation temperature can reach 80 degrees while the ordinary thin copper wire can not
  • The wire is strong and not easy to pull off
  • Easy to use: the other side of the plug to do a whole, can be inserted directly to use.

Visit The Website For More Information…

What's Hot Today!