NOTICE Read the Instruction Carefully! At First, It Would Be Pretty Difficult to Mount The Lamp Onto the Balance Point. Keep Calm, Just Treat It As a Game. If You Fail Many Times, Take A Break and Watch Our Guiding Video. After A Few Successful Tries, You Will Be Practiced. There Are 2 Wooden Plate to Assist Finding the Balance Point. It Is Not Suggested to Use Them. Be Ware. On One of the Plate, There Is a Needle Covered By A Rubber. Don’t Forget to Cover It Again After Use.
Parameters: Magnetic Force > 3N Levitation Height : 8-12mm Color Temperature : White 6000K Light Power : 1W Suggested Working Temperature : 0 ~ 40°C Suggested Working Humidity: 10%~90%RH Base Material : ABS Lamp Material : High Transmittance PLA Material Average Shell Thickness : 3mm Voltage : 100~240V to 15/12V Power : 6W Moon Weight : 360g Base Weight : 600g
【Magnetic Levitating】 – 3 Years of Technical Research & 5 Times super Magnetism, to Enable The Moon to Hover&Rotate in the Air Stably.
【Wireless Power Supply】 – By Adopting Electromagnetic conversion, The Lamp Sphere Gets Rid Of Power Cord, Being Able To Float Independantly, Just Like the Moon.
【Seamless Forming】 – a Unibody Moon Reproducing the Moon Surface Precisely by High-resolution 3D Printing.
【Quality Guarantee】 Gurantee Refund or Replacement for Defective Lamps.
AMZLIFE lunar moon lamp with 3D printing technology
This moon shaped lamp is printed through a 3D printer to capture the full extent of the moon’s surface, with its dents and craters.The lamp is made of a material called polylactic acid,which is an environmentally friendly,non-toxic plastic that is used as “ink” for three-dimensional printing.
1,Touch the metal switch at the bottom of the moon light and switch on the light,the first touch is warm white yellow light.The second touch is cool white.The third touch to switch off.
2,In the light state,long touch for the stepless dimming and select the brightness.
3,Moon lamp with light brightness memory function,the light will remain at the last light state when you switch off.
Name: 3D Printing Moon Lamp
Power Supply: USB DC 5V
Battery Capacity: 900mAh
Charging Time: 3 hours
Lighting Color: Warm & Cold
Working Time: 4-12 hours (depends on brightness you choose)
1*USB Charging Cable
❤3D printing technology:The moon light is using the most advanced 3D printing technology and is made of PLA material,restores the real appearance of the moon vividly.These moon lights have awesome designs and animations inscribed on it. (All other sellers on this list are faker except AMZLIFE)
❤Touch control and dimmable:The usage of the provided touch control can be used to change the color ambiance of the moon light and adjust the brightness of the moon lamp to your liking.Two tones of color:warm white 3000k and cool white 6000k.
❤Rechargeable via a USB:The moon night light include a USB charging cable to charge the lamp,it charges fully in 3 hours and can last up to 12 hours on low brightness and 4 hours on full brightness.
❤Comfortable brightness:The lamp contains a matte finish on the outside so the light emitted is not too dark or too bright. The warm white and cool white options make the lamp ideal for a soft glow to create an ambiance or as a nightlight for little children.
❤Excellent customer service:We are intent to provide you a good quality LED moon lamp.You will be satisfied with the purchase in AMZLIFE.If any problem,feel free to contact us on Amazon.