Armadillo Nylon Alternative 3D Printing Filament – 3mm .5kg – SNOW

Tired of fragile 3D printed parts? Armadillo 3D printing filament is a perfect alternative to some of the most common rigid materials on the market. Armadillo filament is a high performing rigid material, providing 90% higher abrasion resistance than nylon materials. Its toughness ratings are superior to commonly used materials, 86 times greater than that of ABS. It is an excellent material to use for bridging, with virtually no warping issues. When you need a rigid product that can withstand wear and tear, the Armadillo resistance to fracturing makes it a perfect replacement. Suggested Applications: braces, fasteners, gears and protective covers. KEY FEATURES: Abrasion resistance 84% better than PLA and 60% better than ABS Chemical resistance to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Consistent diameter and material properties providing reliable, high quality prints No heated bed required. Build platform requires same prep as PLA PRINTING GUIDELINES: Extruder Temperature:  220°C – 230°C Platform Temperature: Room temperature – 45°C Glue or blue painters tape is suggested if not using a heated bed. Print Speed:  Top and bottom layers: 15-20 mm/ sec (900-1800 mm/ min) Infill speeds: 45-60 mm/ sec (2700-3600 mm/ min) Layer 2+ use cooling fan if available.

Product Features

  • The toughness of a nylon with enhanced tensile strength
  • Excellent bridging capabilities and virtually no warping
  • Shore Hardness = 75D
  • Suggested Applications: braces, fasteners, gears and protective covers

Check Out Our Website For Details…

Cheetah TPU 3D Printing Filament – 1.75mm .5kg – FIRE

Cheetah flexible filament is the fastest and easiest to print flexible filament on the market. The focus in development of this material was on optimizing the user experience. The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market. Cheetah filament possesses industry leading durability along with impact strength 84% greater than ABS. The abrasion resistance is also second only to NinjaTek Armadillo product, making Cheetah the perfect blend of speed, toughness and strength. Suggested Applications: seals, plugs, hinges, sleeves & snap-fit parts KEY FEATURES: Abrasion resistance 40% better than ABS and 76% better than PLA 580% elongation capabilities improve ability to withstand wear and tear Patented low friction exterior allows for smooth feeding Chemical resistance to many materials, including: naphtha, ASTM Oils #1-3, petroleum and Freon Consistent diameter and material properties providing reliable, high quality prints REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature:  235°C – 245°C  Platform Temperature: Room temperature – 40°C Glue or blue painters tape is suggested if not using a heated bed. Print Speed:  Top and bottom layers: 30-45 mm/ sec (600-1200 mm/ min) Infill speeds: 60-80 mm/ sec (3600-4800 mm/ min) Layer 2+ use cooling fan if available.

Product Features

  • Print at speeds greater than 60 mm/sec
  • Impact resistance: 84% > ABS
  •  Industry leading toughness and durability
  • Shore Hardness = 95A
  • Suggested Applications: seals, plugs, hinges, sleeves & snap-fit parts

Check Out Our Website For Details…

Cheetah TPU 3D Printing Filament – 1.75mm .5kg – WATER

Cheetah flexible filament is the fastest and easiest to print flexible filament on the market. The focus in development of this material was on optimizing the user experience. The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market. Cheetah filament possesses industry leading durability along with impact strength 84% greater than ABS. The abrasion resistance is also second only to NinjaTek Armadillo product, making Cheetah the perfect blend of speed, toughness and strength. Suggested Applications: seals, plugs, hinges, sleeves & snap-fit parts KEY FEATURES: Abrasion resistance 40% better than ABS and 76% better than PLA 580% elongation capabilities improve ability to withstand wear and tear Patented low friction exterior allows for smooth feeding Chemical resistance to many materials, including: naphtha, ASTM Oils #1-3, petroleum and Freon Consistent diameter and material properties providing reliable, high quality prints REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature:  235°C – 245°C  Platform Temperature: Room temperature – 40°C Glue or blue painters tape is suggested if not using a heated bed. Print Speed:  Top and bottom layers: 30-45 mm/ sec (600-1200 mm/ min) Infill speeds: 60-80 mm/ sec (3600-4800 mm/ min) Layer 2+ use cooling fan if available.

Product Features

  • Print at speeds greater than 60 mm/sec
  • Impact resistance: 84% > ABS
  •  Industry leading toughness and durability
  • Shore Hardness = 95A
  • Suggested Applications: seals, plugs, hinges, sleeves & snap-fit parts

Check Out Our Website For Details…

NinjaFlex TPU 3D Printing Filament – 1.75mm .5kg – CONCRETE

NinjaFlex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliantPRINTING GUIDELINES: Extruder Temperature:&nabs; 225°C – 235°C Platform Temperature:&Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed:&nabs; Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available.

Product Features

  • Truly flexible – no fill or layer manipulation required to achieve performance
  • 660% elongation allows for repeated movement & impact without wear or cracking
  • Excellent vibration reduction
  • Shore Hardness = 85A
  • Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications

Check Out Our Website For Details…