Specification of aluminum heater block: -Material: Aluminum -Dimensions: 20*20*10mm(LWH) -Inner hole for set screw: M6 and M3 (heat pipe and thermocouple) -Heater Mounting Hole: 6mm diameter -Thermocouple Mounting Holes:3mm diameter -Suitable for Makerbot printer
Specification of heating block cotton: Material: cotton Note: this product only suitable for 3D printer using indoors WAHHING Heater Block Cotton Safe working temperature: ＜300°C This Heater Block Cotton in normal working, may be appear some slight smoke, and the color will turn into dark brown and black is normal, it will not burn! please feel relieved to use!
Attention: Small parts, keep away from children
Package include: 5 x 0.4MM Brass Extruder Nozzle Print Heads 5 x 0.4mm Drill Bits Nozzle Cleaning Kit 5 x 30mm Extruder M6 Tube 5 x Aluminum Heater Block 5 x Heating Block Cotton 1 x Removal Tool
Specification of Brass Nozzle: Type :0.4mm Extruder Brass Nozzle Print Head Color: Golden Material: brass Size: 5*13mm Input Diameter: 1.75mm Output Diameter: 0.4mm Compatible: compatible with all 1.75mm PLA ABS printer, works with Anet A8.
How to use the Cleaner Drill Bits: 1. pull out the nozzle head. 2. heating the nozzle head to consumptive material melting temperature 3. use the cleaner kit to Drill In (not insert directly which would break the drill bit) 4. when you put the drill bit out of the nozzle head, if there is something like yellow sticky jelly stick on the drill bit (which is very sticky on hand), please replace the nozzle head directly. This is because impurities inside the consumptive material melt, which become a layer of mucus stuck in the nozzle head. Normally you can’t clean them up with the drill bit. You might want to replace a nozzle head or even the nozzle throat.
Extruders: Size: 30mm*M6 Material: Teflon PTFE core & stainless steel Weight: 2.6g Inner diameter: 2mm Applies to makerbot or 1.75mm special supplies 3D printer construction.
Makerbot Mk8 Nozzle applies 1.75mm abs/pla material Compared with Mk7, mk8 has larger inner diameter and better support for PLA material This MK8 nozzle is an upgraded version of MK7, better performance than MK7, MK7 applicable 3D printer, MK8 nozzle is also applicable
Nozzle Drill Bits Cleaner: Weight: 0.4g Total length: 31mm Drill bit length: 11mm Drill diameter: 0.4mm
Please kindly note: Don’t use the drill to clean until the nozzle is heated to above 200 degrees!
Package Including: 5 x Extruders 5 x Nozzle Print Heads 5 x Nozzle Cleaner Drills Attention: Small parts, keep away from children!!!
This package includes 5pcs 3D Printer Extruder, 5pcs Brass Extruder Nozzle Print Heads and 5pcs cleaning Drill Bits
3D Printer Extruders, made of Teflon PTFE core and 304 stainless steel material
3D Printer Nozzles, made of international grade brass material
3D Printer Nozzles Drill Bits Cleaner, 0.4mm precision, solid and not easy to break
100% SATISFACTION GUARANTEE – At an affordable price, then simply and roughly a 30-Day 100% Satisfaction or Money Back Guarantee, and 60-Days return without a single question. Try this 3D printer accessories set risk free now
12V，40W heater. DIY hotend requires heat sink to operate properly – metal base, aluminum block, or any other type of cooling device
Assembly of this device is straight forward. Please consult with supplied drawings and pictures for visual clue. Thermistor mounted with clamping screw
– 30mm long stainless PTFE lined barrel -NTC 3950 100K pre-wired thermistor -Low profile: only about 43 mm high – Nozzle is based on MK8 makerbot nozzle geometry and can be exchanged or replaced with many different types of nozzles on the market -This will give you good selection of nozzle orifice diameters
NTC 3950 Thermistor parameters
– Small Size: 1.25mmx2.0mm glass bead – High accuracy: 1% – Resistance value at 25C=100K – Wiring insulation: high temperature teflon/PTFE – Wiring length: 1 meter