300x300mm 24v 300w With adhesive 100K Thermistor Custom Design Welcome. If you need different heating solution and management, just tell us your requirements/applications and let our flexible thermal pros design for you.
Customized Size, shape,voltage and wattage
3M adhesive backing offers excellent and easy mounting
This is the ultimate heating element for your 3D printer’s bed. This is a premium silicone rubber heater, normally used in industrial environments to heat large tanks of liquid. We had these custom made to be the fastest, most evenly heated elements available. They include a built in 100k thermistor for accurate readings with easy setup. They run off 12v power so no dangerous voltage and they CAN be run directly with some electronics (some electronics may require a relay due to the current draw). We have tested these with a Azteeg X1 and X3 from http://www.panucatt.com as well as the RAMPS 1.4 directly with no problems (YMMV). These heaters are flexible and WILL REQUIRE a flat build surface such as glass to mount to.
300mm x 300mm / 12″x12″
Durable Silicone Rubber Construction
Extremely Even Distribution of Heat
Industrial Duty Cycles For Long Life
Heats To 120 Degrees C in About ONE Minute (assuming adequate power supply)
Integrated 100k Thermistor For Accurate and Reliable Temperature Readings
Integrated Thermistor Beta Value 3950K
Thermistor Leads Are Insulated and Ready
Draws Up to 20 Amps So Make Sure Your Power Supply Can Handle It…a 400W+ or Dedicated 12v Power Supply Is Recommended
Most Even Heating Even to the Edges of All Heater Types
Includes Integrated 100K Thermistor (Epcos #1 Table)
FLEXIBLE and Requires Build Surface (Basalt, Aluminum, Glass etc.)