►This is The Chimera Extruder Full kit, replacement parts is very easy, so you can easily upgrade your printer. High Speed Volcano Upgrade + High-quality stainless steel nozzle + all-copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))
►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.
►This is the Sharp Volcano Nozzle for upgrade version. Nozzle Ensure Concentricity and Roundness.
►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm
►2 x High quality copper + stainless steel 1.75mm-0.4mm V6 nozzle ►2 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle ►2 x High quality Standard V6 + Volcano +Copper heater block ►2x TC4 titanium alloy + PTFE Teflon Heat Break ►1 x Aluminum alloy Heat sink + PC4-01 Pneumatic fittings ►2 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor ►1 x High Speed 3010 Fan 12V 0.1A 9000±RPM ►2 x Allen wrenc
Can extrude 2 different filaments at the same time!
TC4 Titanium alloy Heat Break – Ultra-low thermal conductivity, Make sure the printer stable operation.
3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
Descriptions: Name: All metal E3D Chimera Extruder with Wires & Cooling fan Multi-extrusion E3D V6 Dual Head Extruder HotEnd Nozzle: 0.4mm for 1.75mm Rated Voltage: 12V Feeder: Long distance feeder.(Bowden) Heater wire: 12V, 40W, Length 1 meter Heating block: 16*16*12mm Cooling fan: 30*30*10mm, with Bracket
Features: Add Multi-Extrusion capability to your machine with the easiest, most versatile, and highest performance HotEnds in the industry. The Chimera. 2 In, 2 Out – Dual Extrusion System.
Notice: There is no Teflon tube inside the Throat pipe.
Item including: 1 Set All metal Dual head extruder. 2 PCS 12v 40w Heater. 2 PCS 100K NTC thermistor. 1 PC Cooling fan with bracket.
Dual input Dual nozzle RepRap 3D Printer bowden print head 1.75mm / 0.4mm
All metal construction, no PTFE parts in hot zone
Experimental, requires previous experience with dual extrusion
Notice: 1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts; 2. Don’t use the needle to clean until the nozzle is heated to above 200℃(392℉); 3. Sharp parts, please keep away from children.
Compatibility: Upgrade for MK10 hot end extruders. Fit with M7 thread aluminum heater block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc.
Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used as MK10 nozzle.
All metal advantage: All metal hotend allows you to raise the printing temperature. It make the melt plastic more smooth, So as to improve the quality of the printing parts.
Quantity and specification: MakerBot 0.4mm nozzle 1 piece. M7 thread throat kit 1 piece. Nozzle cleaning drill bit 2 pieces(0.35mm,0.4mm). For detailed dimensions, please refer to the drawings in the upper left.
Cleaning skill: The best way to clean up the nozzle is to use the 0.35mm drill bit first, and then use the 0.4mm drill bit. You can twist the needle to make it easier to clean up.