SemiFlex TPU 3D Printing Filament – 1.75mm .50kg – SAPPHIRE

SemiFlex 3D printing filament boasts flexibility, strength and reliability for your 3D printing projects. The slightly more rigid composition vs traditional NinjaFlex allows for increased tensile strength. In some cases the more rigid composition supports ease of printing in certain printers.

Suggested Applications: snap-fit parts, high resolution text, active hinges
SDS &

KEY FEATURES:

  • Shore Hardness = 98A
  • 600% elongation provides significant flexibility
  • 75% greater tensile strength vs the most flexible products;
  • Patented low friction exterior allows for smooth feeding
  • Consistent diameter and material properties providing reliable, high quality prints
  • Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and freon
  • Adheres to most build platform materials (painter’s tape can help)
  • REACH and RoHS 2002/95/EC Directive compliant

PRINTING GUIDELINES:

  • Extruder Temperature:  225°C – 235°C
  • Platform Temperature: 80°C – 110°C
    Glue and/ or blue painters tape is suggested if not using a heated bed.
  • Print Speed: 
    Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min)
    Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) 
    Layer 2+ use cooling fan if available.

Product Features

  • 600% elongation provides significant flexibility
  • 75% greater tensile strength vs the most flexible products;
  • Shore Hardness = 98A
  • Suggested Applications: snap-fit parts, high resolution text, active hinges
  • Patented low friction exterior allows for smooth feeding

Check Out Our Website For Details…

Published by

admin

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “SemiFlex TPU 3D Printing Filament – 1.75mm .50kg – SAPPHIRE”

  1. Awesome material, some special settings/equipment may be required Really awesome material. You have to print hot and slow, maybe my hot end wasn’t upto it or my settings weren’t right as sometimes I get bubbles and clogs. When it works though, it is an amazing material!!If you are new to 3D printing, read about settings and required mods BEFORE you try to use this. I requires some special settings and possible equipment modifications. -1⭐️ For difficulty in useThe photo is a tire with integrated fan for and…

  2. I love this filament. I’m using a FlashForge Creator Pro and did not need to downlload the upgraded extruder piece another user recommended to make this filament work (I’ve been able to successfully print with regular NinjaFlex without the attachment as well). Not sure if that’s because the printer, which I got for Christmas, now has plastic tubing guides to help guide the filament from the spools into the extruder, or if I’ve just been very lucky. I’ve printed out AppleTV remote bumpers and…

Leave a Reply

Your email address will not be published. Required fields are marked *